Solution To This Noisy Zoom G1xOn/G1On
We found a quick fix to the noise of this Zoom G1xOn and G1xOn. It’s called ZNR (Zoom Noise Reduction). Just go to EDIT and add effects, scroll and look for ZNR, then either turn the DETCT to Gtr-In and turn the THRSH up to 17 or 18. Or, you can leave the DETCT as Efx-In but put the effects first on the chain before the amp.
Пікірлер: 379
Hello everyone. Thank you for all the support! By the way I wanted to share my new album #canalwalk kzread.info/head/OLAK5uy_kuqeO0kfy9J1byjqkwhF01sdE0vGq3Fh0&si=rblwnXeCnw5xJfP9
U are such a genius and innocent... The common problem many of us were facing is almost solved. Thanks bro...
@vincentryanborres
5 жыл бұрын
Akhil Sl glad to help. Wish you well and all the best
I can't thank you enough, man! I can finally use this thing properly. Again, thank you very much!
@vincentryanborres
5 жыл бұрын
Ivailo Mihov you’re welcome. There are more on my playlist. Feel free to check it out and use it
I have the same issue with my g1xon. This is the best useful video I found in utube....🤩🤩🤩🤩 You are a hero.
@vincentryanborres
5 жыл бұрын
Isaac Mathew thanks for the kind words. Really appreciate it. Hope you can subscribe to my channel and if you already did, thank you so much. All the best. Cheers!
This is the one I needed for sure! I have several patches to quiet down like this! Thanks!
@vincentryanborres
3 жыл бұрын
Glad to help!!!
This looks like the solution I'm searching for. Thank you so much!!!🎸
ONE MILLION THANKS!!! I was just about to return it,subbed
@vincentryanborres
5 жыл бұрын
PortraitOne you’re welcome. Glad to help.
I have the Bx1on bass version , same noise issues as the Gx1on . Will go back through all my presents now . Thanks for solving the issues !
@vincentryanborres
Жыл бұрын
No worries at all. Glad it gave you ideas for your Zoom B1xOn.
Thank you so much for this,it has really improved the usability of this pedal 🙏
@vincentryanborres
8 ай бұрын
youre welcome and thanks!
Thanks for the solution bro it worked! Good job!
@vincentryanborres
5 жыл бұрын
You're welcome. Wish you well my friend.
Thank you man greetings from Turkiye.You saved my day.
@vincentryanborres
Жыл бұрын
You’re welcome! All the best!
Been trying to figure this out for a while now, thank you so much for the help
@vincentryanborres
Жыл бұрын
You’re welcome
Very useful. Respect for you, mate.
@vincentryanborres
5 жыл бұрын
Volcanic Doom thanks for the kind words
A star is born ...MAGIC & Big thank you 👍👏👏👏👏👏
@vincentryanborres
4 жыл бұрын
Tom Knight glad to help. Thanks for the kind words.
Thank you so much man I'd been struggling with this issue for a long time and now it's gone
@vincentryanborres
4 жыл бұрын
sandheeprajkumar glad to help
Thanks very much for this dude! Much appreciated!👍
@vincentryanborres
4 жыл бұрын
El Guapo you’re welcome
its working!! you are a life saver..
@vincentryanborres
3 жыл бұрын
glad to help.
Thanks!!! This saved me from a headache
@vincentryanborres
3 жыл бұрын
Glad to help!
Wow .. Thank you so much Anna 😎
Another great useful video! Thanks.
@vincentryanborres
3 жыл бұрын
Glad to help
Thank you so much man!!! I subbed! Bdw what is the amplifier you are using?
@vincentryanborres
5 жыл бұрын
I use an amp sim from my Focusrite iTrack Pocket then plug it to my Roland Cube Monitor. CM30. My gigging amp is a cheap Panther TEGA 10 by Hohner. It's like a practise amp but works fine with me because I play quiet songs. But if you do heavier stuff, I think this amp is not loud enough. Thanks for the sub, I really appreciate it.
Amazing and informative! Thanks idol!
@vincentryanborres
5 жыл бұрын
Carlo Glenn Santiago there’s more to come sir on my channel about effects pedals and about guitars. Jope you can stick around. God bless!
What is the Solution of G1XN with pedal old version ,it got noise humm sound,when my hand goes near back to the Zoom,it get fine,but when I get back my hand it again get noise
@vincentryanborres
3 жыл бұрын
it could be grounding problem or power supply. Try and use batteries if possible with the Zoom G1xn. Also another factor could be the amp. Try and use headphones and listen to it if the noise is still there. Just to make sure that it's not the pedal or the guitar that doing it. Another factor could be your guitar cable. There are noiseless. guitar cable. Or someone suggested to me before to buy a wireless guitar system, but I think it's still the same. If it's the guitar or amp that is doing it. I hope this helps.
Awesome. Thank you so much for the solution.
@vincentryanborres
3 жыл бұрын
glad to help.
Excellent explanation 👌 👏 👍
@vincentryanborres
Жыл бұрын
Thank you 🙂
Very much useful bro...thank you so much
@vincentryanborres
5 жыл бұрын
Abhinav Parashar you’re welcome. Please subscribe to my channel because there will be more videos to come. If you already did, thank you so much. I really appreciate it!
The ZNR seems like a gate effect from the bottom of any volume. I use the default gate a lot in GarageBands guitar speakers. Very interesting device anyhow.
@vincentryanborres
6 жыл бұрын
Yup! thanks for the comment.
Thank u man.. Can't show u how good I am feeling
@vincentryanborres
2 жыл бұрын
You’re welcome and also I got another video which is solution to this update because there are few effects that are gone like the auto wah so with this new video you can pick and choose which effects you want to add on your pedal kzread.info/dash/bejne/fKyit7aFmaqtdbA.html
@tridipcovers..3392
2 жыл бұрын
@@vincentryanborres but in some tone that is like in Distortion patches if we make low the thrsh then the attack of the guitar string s become low it don't sound much good
@vincentryanborres
2 жыл бұрын
Yes totally agree with you on that one. That's why sometimes it's a balance of leaving some of the noise rather than removing it totally because the tone suffers. I personally don't use the noise reduction that much. Because if Im playing live with a band, the noise is being drowned by the drums and rhythm guitar so I don't really mind it. Its better to leave the natural sound rather than putting the noise reduction.
Thank you very much Vincent .
@vincentryanborres
5 жыл бұрын
zembla Zembla you’re welcome!
Thank you dud for the tip. It helps me a lot
@vincentryanborres
3 жыл бұрын
You're welcome. Glad to help. Also I got lots on my playlist patches like Queen, Santana, GnR, etc. And here's my tutorials for this pedal. kzread.info/head/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z
Thank u sir ...finally after months I will be free of noise
@vincentryanborres
4 жыл бұрын
UGEN TAMANG. Glad to help sir and happy Christmas
Thank you for this, Sir!
@vincentryanborres
2 жыл бұрын
Welcome glad to help.
Thanks for this sir........ Its real helps me a lot.......👍
@vincentryanborres
3 жыл бұрын
Welcome and glad to help!!!
Oh.... Nice to meet this clip. Thank you.Thank you.Thank you.Thank you.Thank you.
@vincentryanborres
4 жыл бұрын
Identity V 555 thank you as well
Thnx so much it really helped out
@vincentryanborres
3 жыл бұрын
Welcome and glad to help.
Very useful video..Thanks sir
@vincentryanborres
5 жыл бұрын
CHITTIBABU LANKA you’re welcome!!!
Duddeeee! Damn noise was cut. Lol. Thank you bro!
@vincentryanborres
3 жыл бұрын
Welcome!!!!
you are life saver thanx buddy
@vincentryanborres
5 жыл бұрын
BikerBrothers you’re welcome
Thank u for this lesson, it is very help ful for me. Sir please make a video about patch setting of another brick in the wall. Intro delay setting as well as solo patch setting.
@vincentryanborres
5 жыл бұрын
Sorry for the late reply. I will find time to do it. Really busy at the moment with work, my new group and a lot going on for my channel. I will get back to you.
God bless you for making this video
@vincentryanborres
3 жыл бұрын
Thank you and glad to help.
Very useful brother thanks for the massage 💖
@vincentryanborres
2 жыл бұрын
All the best!!!! You can always search zoom G1xOn Vincent Borres and it will suggest my videos about Zoom G1xOn
Woow....you are a Machine broo.!!
@vincentryanborres
4 жыл бұрын
Mr. Gzu cheers
GOOD JOB!!!!!!!! THANKS!!!!!!!!!
@vincentryanborres
5 жыл бұрын
Robert Kazmierski thanks
Why would anyone dislike this video? Thanks man 👊🏻
@vincentryanborres
3 жыл бұрын
Thank you for the kind words and you’re welcome. Happy Christmas!!!
Great man........✌✌
@vincentryanborres
6 жыл бұрын
Ashbin Rai cheers!
Does order matters? Like if i want to create any guitarist patch then should i have to go with given order? Could that change my tone?
@vincentryanborres
5 жыл бұрын
chinmay khatkul yes it does changes the tone when you re-arrange the pedals. Here’s my video about the effect chain. kzread.info/dash/bejne/Y5t4yKaom7CtoM4.html please subscribe if you like my channel. Thank you if you already did. I really appreciate it.
Thank you so much,I have this issue how can close noise in my processor.but you teach me . again thank you so much.
@vincentryanborres
5 жыл бұрын
Sundar Jarola glad to help
Thank you very much bro 🙏
@vincentryanborres
3 жыл бұрын
Welcome. And by the way, I got lots of videos about this zoom G1xOn you might want to check it out. Thank you in advance kzread.info/head/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z
how do you fix the plug hole. because it doesnt have on off switch i ruined it from constantly UN-plugging and plugging in lead.
@vincentryanborres
5 жыл бұрын
lobster whisperer sorry to hear that. To be honest I dont know as well how to fix it. But Im sure there’s someone hear on KZread thats got an idea. Or take it to a repair shop. Really sorry
Hi, when I try to "add effect" I get the 6 option boxes in the display, but the last one is "exit" whereas yours shows "pedal"....I don't have the option of adding the "znr" pedal at all....how can I replace the "exit" option with the "pedal" option?.....this is the same for all patches, regardless of how many pedal effects already exist in the chain...help!
@vincentryanborres
6 ай бұрын
You can only use up to 5 effects per patch. The pedal is a separate thing that you activate and assign. Here’s how to assign function to the pedal. kzread.info/dash/bejne/c4yNo9aAZpy-pZM.htmlsi=v-Bdqg9m2OWF5aan
@vincentryanborres
6 ай бұрын
Also I got a playlist on how to go about the Zoom G1xON, you might want to check it out as well. kzread.info/head/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z&si=sgotf3yr-tsdFhYJ
Great vid ....thnx a lot
@vincentryanborres
5 жыл бұрын
Shaileaf Tamang thanks
Just posed that question elsewhere. Thanks ... Still not convinced to trade out my valve amps. But it's information I was missing from the decision process.
@vincentryanborres
5 жыл бұрын
George Heil cheers! Totally agree that this gadget is no match to the sound, tone and feel that you get from it.
Thanks sir..I struggle this issue to my effects..Gid Bless
@vincentryanborres
3 жыл бұрын
welcome and glad to help.
Hey I've a G1on and it creates a lot of noise when i connect it to my speakers. I tried doing this but it doesn't have the same options and the ZNR. Is there any way to solve this on G1on ?
@vincentryanborres
3 жыл бұрын
Is there Noise gate in there or ZNR. Put it at the beginning of the chain. Then increase the threshold THRSHLD to 15-16. Can I ask what guitar and amp your using? Coz sometimes with single coil guitar it’s got louder noise than humbucker pickups.
Thanks bro very very thank ful to u
@vincentryanborres
5 жыл бұрын
Deepak Choudhary you’re welcome
Excellent! Thank you
@vincentryanborres
3 жыл бұрын
Welcome!
Most useful video ever on KZread .I wish i could do ..1 million likes for this video
@vincentryanborres
4 жыл бұрын
Thank you so much for the kind words. Glad to help.
@NikhilLokhande
4 жыл бұрын
@@vincentryanborres thank u once again
Yes .this is real close to just learning it and not changjng it so much til I'm used to some of these changes.here go I Vincent Ryan borres.
Thank you 👍👏
@vincentryanborres
3 ай бұрын
You’re welcome
How do I set up the effect I need ? All the effects are mixed up . And how am I supposed to play it when the effect I need is 10 step far . Please
@vincentryanborres
5 жыл бұрын
rojan rijal here’s the playlist about how to edit and how the buttons work and how to swap patches so that they are next to each other. kzread.info/head/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z
Hi i have a similar issue with the G1x Four. Do you know of a solution? Tried the trick but didn't work.
@vincentryanborres
2 жыл бұрын
High gain settings normally creates noise. It can only be minimised but not totally get rid of. That's why most guitarist turns off the volume knob of their guitar after they end a song or when they do guitar solo. If you observe Joe Satriani, Steve Vai, Paul Gilbert they tend to turn the volume of their guitar down after doing lead. In my case I got a clean tone and lead tone, so that Im on clean tone before I play lead and then step back again to clean tone after I finished so that I can hide the noise. There are factors that can minimise the noise like shielding the wires of your guitar, using noiseless cable, using ground lift from DI box so that the amp and your pedal doesn't have that hum. But even with those in place, you will sometimes encounter static noise depending on the venue, the amp or guitar use, etc. Hope this helps.
Sir how to patch simultaneously distrotion, acoustic n all that 5 effects on ZOOM G1ON EFFECTIVE PEDAL
@vincentryanborres
5 жыл бұрын
Drx prasanta Bal press edit then scroll the knob to add effects. Then the cursor will let you choose which effects you want to add or edit.
@drxprasantabal781
5 жыл бұрын
Thank you SIR...I'll try ..let's see WT happen☺️
@vincentryanborres
5 жыл бұрын
Drx prasanta Bal yes and then message me again. Or the other thing, is for me to make video of it and if you can subscribe so you get updates. If you already did, thank you very much
Thanks so much for this! :) It works on all the patches I've tried, but I can't seem to add a pedal to the original I5(WhiteBlues) patch though. The screen shows "processing limit/DSP full/can't use pedalvx/change effect type". The third effect in the patch is also a ZNR pedal- should I just move it to the last? Also, "gtr in" means that it's the first effect in the patch, ya? Thanks so much for your help again! :)
@vincentryanborres
3 жыл бұрын
Welcome. Yes sometimes when the patch got strong effects even if it’s only three or four effects, you’re not able to add anymore and it says processing limit is full. I can’t seem to understand it as well. But what I do sometimes is remove or swap other effects for example if it’s an Overdrive or Distortion, I just use similar effects in order to accommodate the pedal. Yes about the ZNR if it’s GTR IN means that wether you put ZNR in the middle it will still be the first one. It won’t affect the chain of effects.
@Shalini_Jay_Music
3 жыл бұрын
@@vincentryanborres Ahh...okay, that makes sense :) I'll try that out. Thanks so much again for your kind assistance. I no longer have to play with that annoying buzz in my headphones! :)
@vincentryanborres
3 жыл бұрын
By the way, I checked out your channel. You got loads of videos there. Nice! I enjoyed it. I wanted to share to you this acoustic sim Patch that I made from Zoom G1xOn. It's a lovely patch, you're going to enjoy it. kzread.info/dash/bejne/fqudw7pmgarWpdY.html
@Shalini_Jay_Music
3 жыл бұрын
@@vincentryanborres Thanks, Vincent! I'm going to try to post more regularly now that I'm pretty much stuck indoors. Will definitely check out that video- there's so much to explore with the pedal and your videos really help, so thank you :)
@vincentryanborres
3 жыл бұрын
@@Shalini_Jay_Music you’re welcome and looking forward to your videos.
Thankkkkk youuuuuuuuuuuuu...😌😌😌😌😌😌😌😌
@vincentryanborres
4 жыл бұрын
Snehamoy Chakraborty welcome. Glad to help!
Sir should I put it first or at the last of my effects chain? Does placement of the znr make any difference?
@vincentryanborres
3 жыл бұрын
If it’s on GTR In it doesn’t matter where you put it but if GTR in is off then it will affect depending on the placement.
Thanks,...thanks,...thank you so much...very usefull info,..your solution solve that noisy problem....very smart solution...great mannn...;^)
@vincentryanborres
4 жыл бұрын
Thank you for the kind words. Glad to help!
Nice video
@vincentryanborres
3 жыл бұрын
thank you so much!
dear. in G1on there is no option for pedal in "add effect section" :( pl help how to add ZNR in G1on.
@vincentryanborres
5 жыл бұрын
Siddhartha Bhardwaj sorry to hear that. To be honest I don’t have Zoom G1on but the manual says that they are the same apart from the expression pedal where you can assign Wah Wah. Here’s how I do it, turn that round knob to right until it says add effect press enter and look for DYN/FLTR press enter then turn knob to your right and add effect to here being the first one from your right. You will see Comp press the blue cursor which is like arrows up down left right but press the up arrow until you find the ZNR I think it’s the fourth or fifth effect when you press up.
@vincentryanborres
5 жыл бұрын
Siddhartha Bhardwaj thanks for subscribing. By the way here’s more videos about Zoom G1xOn/G1On and you might pick up some ideas here. kzread.info/head/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z
@siddharthabhardwaj86
5 жыл бұрын
wow got it :) so so much thanks.
@vincentryanborres
5 жыл бұрын
Siddhartha Bhardwaj glad to help
Thank you!
@vincentryanborres
3 жыл бұрын
you're welcome!
Sir, need urgent help cause i really can't figure it out alone.. my problem was whenever i am changing an effect to another, its volume is resetting to 0.. e.g. if i currently have a clean sound effect with 100% volume then i change it to a distorted, the volume resets to 0%
@vincentryanborres
4 жыл бұрын
Hello! I haven't encountered that problem yet. And it's difficult for me to know because I dont see it physically or hear it to know what to do with it. Have you tried resetting it to factory setting, it might solve the problem. Here's the link: kzread.info/dash/bejne/p4CpwcqNmrHfmco.html
Thank you dud
thank you so much
@vincentryanborres
Жыл бұрын
you're welcome!
thank uhh so much bro
@vincentryanborres
4 жыл бұрын
glad to help.
So in ZNR we have to put it in first in effect chain?
@vincentryanborres
3 жыл бұрын
Yes. so that all of the noise will be filtered.
Thank you 😊
@vincentryanborres
10 ай бұрын
You're welcome 😊
BLESS YOU SIR
@vincentryanborres
5 жыл бұрын
Your Dry Blazer cheers! More videos to come in the next few days but more on basics, how to edit, etc.
While changing patch from Acoustic to Distortion , How to maintain output volume. i.e When i change patch to Distortion Volume becomes too high
@vincentryanborres
4 жыл бұрын
TuneAndPlay you can change the volume level on each patch. Just press ENTER and then scroll til you see patch settings and then on there you will see Level. You can adjust that
@vincentryanborres
4 жыл бұрын
TuneAndPlay here’s a playlist I created. This might help you
@TuneAndPlay
4 жыл бұрын
@@vincentryanborres dont see any playlist
@vincentryanborres
4 жыл бұрын
TuneAndPlay kzread.info/head/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z
man, you are a genius, can you make a video on how to get good sustain effect, the sound doesn't sustain good enough using this g1xon
@vincentryanborres
4 жыл бұрын
Thank you! Here's my personal lead tone patch. Hope this can help. kzread.info/dash/bejne/p46Yua2tepjgXZM.html
Nice one Kabayan, I'm wondering also how get rid.of those noise in my G1on
@vincentryanborres
2 жыл бұрын
welcome and thank you kabayan.
halo bro,.how about the other effects I use, like SPEED METAL. or POWER LEAD. its noise. it is the same procedure? hope you read it. tnanks
@vincentryanborres
3 жыл бұрын
Same procedure. You can remove one of the effects that is not needed and put the ZNR. But if there’s still space because you can put up to 5 effects, then just add the ZNR
@kuyarichvlog6869
3 жыл бұрын
@@vincentryanborres thanks bro,
@vincentryanborres
3 жыл бұрын
@@kuyarichvlog6869 welcome
Sir plz make the video about distortion adjustment like john petrucci sound effects.
@vincentryanborres
5 жыл бұрын
KAMAL SONAR im afraid I cant do justice with John Petrucci music and the patch. I did a generic patch. This might help. kzread.info/dash/bejne/faGMxK5ue9qfp6g.html
What's difference does Efx-in or Gtr-in makes?
@vincentryanborres
4 жыл бұрын
It means that the ZNR (Zoom Noise Reduction) when it's on the EFX in is that it's more active on the effects. So if you got a noisy pedal, it should be put after so that it will filter the noise. When you use the GTR in, it means that it will filter any noise albeit from your guitar or wherever, so you can put the ZNR anywhere in the chain.
Thanks for this
@vincentryanborres
4 жыл бұрын
gaurav nath you’re welcome
Sir salamat ng marami sa tutorial the best tut about g1xon. More powers
@vincentryanborres
4 жыл бұрын
Jay Becina welcome. Glad to help.
@jaybecina3888
4 жыл бұрын
@@vincentryanborres sir ask lang po anong pinagkaiba ng efxin at gtrin?
@vincentryanborres
4 жыл бұрын
Jay Becina bale sa placement as pedalchain sir nakaka-apekto sya sa noise reduction depende kng saan nakalagay ang ZNR kng sa huli o gitna. Effects In ata pag gitna ay guitar in kng sa huli mo nilagay
thanks man
@vincentryanborres
4 жыл бұрын
glad to help.
I have one more issue sometimes when I select a particular patch, there is no sound coming from my amp, after striking the strings of my guitar. The sound comes for only few seconds and only when I strike harder. Can u find out why that happens?
@vincentryanborres
5 жыл бұрын
Rishabh Sharma it might be faulty footswitch button. Or it could be power supply issue. Try resetting it to factory setting and use new batteries. I will send you link on how to reset your zoom.
@vincentryanborres
5 жыл бұрын
Rishabh Sharma here’s how to reset kzread.info/dash/bejne/p4CpwcqNmrHfmco.html
@vincentryanborres
5 жыл бұрын
Rishabh Sharma if it doesnt work may be you need to return it and ask for exchange
@rishabhsharma5657
5 жыл бұрын
@@vincentryanborres thanks for replying, i will try reset the device.
@rishabhsharma5657
5 жыл бұрын
So after resetting, the device will have factory patches or not? Just wanna make sure.
How can i edit a good sound to my pedal effect??
@vincentryanborres
4 жыл бұрын
Try this one kzread.info/dash/bejne/p46Yua2tepjgXZM.html
@vincentryanborres
4 жыл бұрын
If you want to learn more about the pedal, perhaps this can help kzread.info/head/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z
thank you bruh.... uh saved me
@vincentryanborres
2 жыл бұрын
Glad to help
thankx yar
@vincentryanborres
4 жыл бұрын
Glad to help
Subscribed
@vincentryanborres
4 жыл бұрын
thank you!
Yeah it has some noisy patches.Only answer seems to be to go through them and add Zoom NR at the end of the patch chain.Not necessarily all patches just your favourites.Dammit I really should wait,just noticed your doing that😂
@vincentryanborres
6 жыл бұрын
John Iain McFarlane yeah, but to be honest I like some noise especially doing live gigs. It creates more live feel. I guess like many classic guitarists. Hendrix, Blackmore, Page, etc...
@minus9us677
3 жыл бұрын
putting it at the end of patches is not ideal, it will cut off reverbs and delays... lol
Sir please tell me how to clean noise sound from g1 xon zoom please tell me sir
@vincentryanborres
5 жыл бұрын
AVISHAN EKKA hello. About the noise, there will always be noise with high gain or distortion. The noise reduction will only minimise or reduce it. Another thing is that some guitar are a lot better in terms of noise as well as other amps are noisy than others. Its all combination between the guitar, the cable and the effects pedal.
I have purchased Zoom G1xON .. Can u please tell me what is the settings for perfect Distortion sound ?
Bro I just encountered the same problem at a live giv yesterday... Even after the setup, when I turned on the distortion , it produced a less noise in my feed back amp, but it amplified 10x when its heard from external amps... As a result they had to lower my level of my guitar which cost the whole band to compromise on the distortion part.. Any idea why it happened ?
@vincentryanborres
5 жыл бұрын
NS TCG during live gigs there lots of problems that you might encounter like the venue might have a different grounding system or the voltage is slightly different. I normally use batteries. Another thing is that sometimes the settings you have is compatible with your amp but if you change amp, you need to adjust the settings again i.e. volume or gain level. Now having said that, you need to observe your unit itself may be its playing up and there’s something wrong with it. Try Batteries, try the usb option for power and observe for few hours. If it plays up again then its probably your unit. Return it if it has warranty, ask for replacement.
@nstcg7271
5 жыл бұрын
@@vincentryanborres I used the battery but it's power was low , so I used both 5v charger and battery... The preset was default LA LEAD They said I must use da box... The noise was like a big humming grains.. I don't usually get those from my amps.... So didn't know how to troubleshoot this...
@vincentryanborres
5 жыл бұрын
NS TCG remive the battery when you use the usb power or the adaptor is in use. Its hard for me to know exactly what’s happening. Can you edit the LA lead and put zoom Noise Reduction ZNR to it? See if that helps
@nstcg7271
5 жыл бұрын
@@vincentryanborres yeah I used znr.i also thought about using them both( battery and adapter) will make noise, otherwise it must be the poor grounding / cables ... Anyways in future I shall take extra time for sound check to troubleshoot it out .. Anyways thanks for digging in 🙂
@vincentryanborres
5 жыл бұрын
NS TCG another way perhaps is process of elimination. If you can borrow a different amp and different guitar. And use your present settings. Then swap around like your own guitar paired with your friends amp. Then ypur friends guitar and your amp. That way you can find out if there’s difference and if its your zoom or your guitar or amp thats causing it
BEST VIDEO
@vincentryanborres
5 жыл бұрын
erik kästner thank you!
@x2dk22
5 жыл бұрын
@@vincentryanborres :)
Just use a USB powerbank, it doesn't introduce the 50/60Hz buzz.
@vincentryanborres
5 жыл бұрын
Michael W thanks for the suggestion. Here’s my video after i posted this, kzread.info/dash/bejne/p59kmblrkdu4Y5s.html
@hemantakakati1103
4 жыл бұрын
is there any chance of damaging the device when always using USB powerbank (Output: 5V) ?
@jenizj3481
3 жыл бұрын
@@hemantakakati1103 no. Unless you trip on the cable and break the port
@hemantakakati1103
3 жыл бұрын
@@jenizj3481 i tried that last year many times but sometimes after using for long it gets stuck or hang then i had to unplug and plug the device again to restart
😱 why didnt i see this video sooner
@vincentryanborres
Жыл бұрын
Bless!
I don't have the Pedal option. Should I update the firmware on my device?
@vincentryanborres
3 жыл бұрын
If your using Zoom G1xon, there should be a pedal option but if it’s Zoom G1On, then there’s no pedal option.
@vincentryanborres
3 жыл бұрын
Here’s my video regarding assigning function on the pedal. kzread.info/dash/bejne/c4yNo9aAZpy-pZM.html
@TheChuckky
3 жыл бұрын
vincent ryan borres I have the G1On. Is there any fix for this model? Only some effects have ZNR, for example LA Metal doesn't. BassSim has.
@vincentryanborres
3 жыл бұрын
@@TheChuckky you can alter the settings by either removing an effects and swap it with ZNR. So patch doesn’t need ZNR that’s why they didn’t put it.
@vincentryanborres
3 жыл бұрын
@@TheChuckky I got lots of videos about the Zoom G1xOn that you can use for Zoom G1On. Here’s one of the playlist I made. kzread.info/head/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z
Thanks
@vincentryanborres
Жыл бұрын
Welcome
So basically we can put that into every effect right to reduce the noise ? Thanks in advance:)
@vincentryanborres
5 жыл бұрын
Nursultan Iksan yes you can add this to high gain patches to lessen the noise but no need on your clean tone.