Solution to Eufy RoboVac Loud Noise From Rattling Brush
Тәжірибелік нұсқаулар және стиль
The most common reason why your Eufy robovac is noisy and loud is because the rolling brush bearings are full of hair. You will be surprised by the amount of hair inside the rolling brush bearings.
After further investigation, I have found out that the real problem is that debris, hair, and a collection of dust somehow make their way into the bearing housing on the main rolling brush.
This then causes the bearing to stop rotating, and then begins to wear out the brush guard that traps the bearing housing in place. This results in the main brush becoming loose, and accelerating the wear process.
To fix the noisy brush, take the cap off both ends of the rolling brush with pliers and clean out the insane amount of hair wrapped inside. It’s okay to pry each bearing out from the rolling brush with a little force.
You can read the article: cleanerstalk.com/why-eufy-rob...
Пікірлер: 63
Cleaned every bastard hole and gap I could find...still made the noise. Had no idea that little cap popped off, fixed. Thank you so much, legend.
I haven’t used my vacuum in MONTHS because of the terrible noise. I couldn’t believe how much hair i pulled out that was stuck around the bearing. I wish i could like this video 100 times
@cleanerstalk
Жыл бұрын
Glad your vacuums works now!
So I completely opened my eufy 2x to see what was wrong... put it back together and still made a horrible noise.. wasted 1.5 hrs... after ur video it was fixed within minutes!!! Thank you!!!
thanks man, my wife thinks im a genius robovac wizard now that Tony has stopped making that god awful noise
You have seriously saved our sanity at our home. God bless you, buddy!
THANK YOU!!!!!!!! yes i'm screaming it to the top of my lungs bc I tried everything!!! Sanity reclaimed!
The noise was starting to drive me mad. Hair around the bearing was definitely the problem. Thanks very much for the video.
@cleanerstalk
Жыл бұрын
You're welcome.
Thanks, Was a serious rattle coming out of mine. Cut some electrical tape into thin slices that could wrap around it to make it a bit thicker and seems to have fixed it. Many thanks
Thanks so much! Who knew it could be this simple!
@cleanerstalk
13 күн бұрын
You're welcome!
Fixed my issue Asap!!! Thank you! Looked up on the official website and nothing (most likely to make their customers buy a new brush) and as soon as i see ypur video and clean out the bearing, and add oil to it, Boom! Running quietly like never before. THANK YOU!
@cleanerstalk
Жыл бұрын
You're welcome.
Thanks! I opened the cap, there was a cat inside! I cleaned it and now it’s quite again. I owe you a cup of coffee!
@cleanerstalk
Жыл бұрын
I would love that! :)
Did you just save my sanity and my wallet?! Yes you did, thank you so much!!!!
@cleanerstalk
13 күн бұрын
You are so welcome!
Shhhh, mate! I love you for this. I just bought a "broken" second hand Eufy 30c for £35 and your tip fixed it! I bought a new battery, and swapped that in already as I wanted it to last more than 5 minutes. I wasted more than an hour searching Eufys help section, before finding this video. THANKS!
Thanks soooo much for taking the time to do this video on the eufy! I thought the problem was going to be much more and was procrastinating and dreading the repair. Your video helped me fix it in like 20 minutes!
I was going absolutely MAD trying to figure out why my G30 was making so much noise lately. Thank you so much for this!
Thanks! I was able to pull hair out of the bearings of both my Eufys. Unfortunately I think part of the issue on one of them is that the rough grooves causing the noise are in the dug-out in the Eufy body where the bushing sits. I still get a bit of grinding if I swap in a new brush with a new bushing, but if I run it with no brush there's no grinding at all.
This worked perfectly for my Eufy 15CMax - I was going insane trying to figure it out - removing a year of dog hair from the bearing and giving it a shot of compressed air worked!
I saw some videos and heard the problem is the motor. I have opened the robot twice and saw this video for more ideas. Now my problem is solved after this. I was looking for new motor but no! Thank you so much
Thank you very much. It worked, there was lots of hairs inside preventing the bearing to spin. I tried using pliers but I ended up biting it out and it worked better.
same issue... did the electrical tape you suggested & worked Great! Thank you!
Omg I was ready to buy a new one the sound was so terrible.. but a 5 sec solution was all it took! Thank you!!
Thanks man ... Mine was driving me CRAZY and it was like you've explained. I cleaned it and it's like new.
Thank you so much!!! This helped with my noisy eufy I cleaned it multiple times I wipes the sensors, charging pins, cleaned the roller brush Cleans the roller brush guard Cleaned the filter The dustbin This is a life saver 🩷
@cleanerstalk
2 ай бұрын
Glad it helped
THANK YOU SO MUCH! This completely fixed it. WD-40 really does work miracles
Easy fix! This worked perfectly for me. Problem was exactly the same. Thanks for sharing :)
Fixed the noise on mine, brilliant video cheers! 👍
I was about to throw my Eufy away. Your video was so helpful! Thank you!
@cleanerstalk
13 күн бұрын
You're welcome!
Thanks for this information 👍
YOU ARE AMAZING! Thank you.
thanks bro, worked even without taking it off - just taking out a few hairs
You're an actual legend.
Absolutely spot on
Thank you fixed my problem
Thank uuu
It worked! Thank you
@cleanerstalk
3 ай бұрын
You're welcome!
I couldn’t get the damn cap off without mangling it so I just put some oil around the edges and worked it in there. Noise is gone… for now. 😅
That fixed it thanks!
@cleanerstalk
Жыл бұрын
Awesome!
You da man!
Bro thank you 🙏
@cleanerstalk
13 күн бұрын
No problem 👍
Do you have the blueprint for the 3d printed peice
thank you thank you thank you
@cleanerstalk
4 ай бұрын
You are very welcome!
Thank you 😊
@cleanerstalk
Жыл бұрын
You're welcome.
Can you post a link to your file for the new cap?
Hi there, do you sell that orange cap? Would love to buy one for our Eufy. It's making terrible noise.
Thanks man
@cleanerstalk
Жыл бұрын
You're welcome.
Thaaaaaaaaaaaaank you!!
I just put WD40 on the edges of the brush and the sound is gone
How can i give 1000 likes?
@cleanerstalk
13 күн бұрын
Tell everyone you know! :)