Very nice! Especially working with such a small part of the band. Definitely going to save the video for future reference.

@heinikendude

4 жыл бұрын

Thanks for your nice words! ;-)

beautiful work!!!

@heinikendude

7 жыл бұрын

Thanks Cassiano!

Amazing work.

@heinikendude

6 жыл бұрын

Seungkan Park thanks Park !

Thanks for your great job...artist!

@heinikendude

3 жыл бұрын

Thanks David!

Trabajo de categoría. Gracias por compartir.

@heinikendude

3 жыл бұрын

Gracias Elier!

Thanks for your video❤

Excellent work

@heinikendude

4 жыл бұрын

Thanks for your comment

Great artist ❤️

@heinikendude

3 жыл бұрын

Thank you very much Bhanu!

i use a marathon micromotor and rotatory burs to cut metal. then i polish the bright cuts with tiny sanding paper disks. the final result is always very clean. i like the fact thet there are different ways and tools to do the same work.

@heinikendude

3 жыл бұрын

Hi Vitto, I believe that your approach is also very practical. However you must agree with me that the shine of a hand pushed bright cut is amazing ;-)

@vittodx7510

3 жыл бұрын

@@heinikendude there is no other way to obtain that shine, i must admit. but i have to see the final polish with brushes (under a microscope) and see the differences between cutting burs and burins. but yes shine with burin > cutting burs.

Waw stupéfiants magnifiques grands merci

@heinikendude

5 жыл бұрын

Amani thanks for your love

Fantástico

Excellent work! Do you made all the work under microscope or just to set the stones?I have a micro and is very complicated to me work with the micromotor under microscope Thanks!

Great!

@heinikendude

4 жыл бұрын

Thanks ;-)

God is creating Universe with Diamonds and piano

@heinikendude

4 жыл бұрын

Thanks ;-)

That's NICE! What is that thing your carving the edges out with?

@heinikendude

3 жыл бұрын

HI Lawrence, that is a carbide graver. I polish these at certain angles and to the specific job.

nicely giving over idea 👌to how can 11:29'' to 11:59'' practical, quickly alternative way.from other sharpening methods.

@heinikendude

Жыл бұрын

Thanks! I always prefer the hand held sharpening option over a GRS disk sharpener

what kind if rotary tool are you using? and what tools do you find the most useful for setting stones?

@heinikendude

5 жыл бұрын

Llama Sama equipment is all juratools. Check them out and mention my name. To pick up the small diamonds and eventually set them I prefer a beading tool and some water. Adhesion - cohesion

@llamasama4458

5 жыл бұрын

@@heinikendude Thank you very much for the reply and the information. I enjoyed watching your work immensely.

beautiful work mate what gravers are you using?

@heinikendude

7 жыл бұрын

Hi Jacob, First of all thanks for the comment and sorry for replying so late. All gravers are 'Carbide' and hand sharpened. You can also re-use and re-cut old carbite tip bol burs from Bush or so... Bests

@spidersinspace1099

4 жыл бұрын

Thanks for posting your work. Very inspirational.

Beautiful work! What type of wheel do you use to sharpen/polish your gravers?

@heinikendude

3 жыл бұрын

Those are called diamond wheels available from Juratools

@Omrr-vu6gy

2 жыл бұрын

Yo uso discos de carborundio

@helenhill9482

2 жыл бұрын

@@heinikendude thank you

Are you not marking the center point of each stone? Looks like you only mark the margins of each stone and drill in between each mark, drifting the hole as you step up ball burr size

@heinikendude

5 жыл бұрын

Yes, you are correct. I drill in between to not lose the marks. If I drill on the marks I lose my 'reference points' ;-)

👏🏻👏🏻👏🏻

That s a beautiful ring. But when there's no hole drilled all the way through, how does one clean out behind those diamonds?

@Tipseybear1994

7 жыл бұрын

just with water and soap, or if its a mess throw it in a sonic bath

@heinikendude

7 жыл бұрын

+Inlow Jewelers, Indeed Tim, just using a sonic bath. Diamonds reflect light within itself, so no need for a hole all the way through =)

@heinikendude

7 жыл бұрын

+Inlow Jewelers, that's correct Tim, just using a water bath /ultra sonic... Diamonds reflect light within them, so no need to drill holes all the way through. =)

@pompiliogortaire9724

7 жыл бұрын

j qc

классно жду новых видео)

@heinikendude

3 жыл бұрын

English ? ;-)

So actually there is no need to use a flat graver for bright cutting the sides?

@heinikendude

4 жыл бұрын

I do use a flat graver ;-) I cut inwards with a flat graver.

Hoi, ff vraagje als je het niet erg vindt. Is een carbide bolfrees al voldoende om een beading tool weer scherp te maken of moet ik ook een carbide drill bit kopen?

@heinikendude

3 жыл бұрын

Hi Andijvie, je kan het best een oude carbide bolfrees gebruiken om daar een piramide van te slijpen. Deze gebruik im om de beading tools weer mooi hoogglans te polishen .

@andijvie3119

3 жыл бұрын

Rechstreeks met de blauwe Ceragloss wiel of met de gele?

Can I ask what are you using for zooming ? Thanks

@heinikendude

3 жыл бұрын

Hi Constantin, Yes it's a normal cam recorder from sony with an digital zoom

What tool are you using to shave off the sides?

@heinikendude

3 жыл бұрын

These are different kinds of gravers; flat gravers, 60 degree gravers ,.. all made by hand

whats that tool called used to measure and carve out the lines on the ring

@austinreagan8005

3 жыл бұрын

It looks like he is using a caliper to do the scribing

@heinikendude

3 жыл бұрын

Hi Young Boss, this the best device for measuring, it's from Juratools reach out to them and mention my name ;-)

T is a beutifull setting .what ever happen whith the reside dead and drigthe cut annd rounded whith deader and mllgrain tecnic

@heinikendude

Жыл бұрын

HI Gloria, I don't fully understand your question.

Which divider you are using my friend?

@heinikendude

4 жыл бұрын

Hi Zack, I use JuraTools. Check out his website for the best tools!

Sir, I want to ask, what's the name of the syringe? who made that side

@heinikendude

3 жыл бұрын

Hi Eric Lee, what do you mean with the syringe?

@Kenjo_Lee

3 жыл бұрын

@@heinikendude 6:50 in indonesia we called him a syringe

@Kenjo_Lee

3 жыл бұрын

I also put diamonds

@Kenjo_Lee

3 жыл бұрын

@@heinikendude it's not a mechine?

@Kenjo_Lee

3 жыл бұрын

The blade is the same as mine, but I use a small hammer for it, because it is less smooth

what is the machine of tool for the carving ?

@heinikendude

7 жыл бұрын

ArtGraver from Jura =)

🤩👍

@heinikendude

3 жыл бұрын

Thanks!

What is the name of this machine

@heinikendude

4 жыл бұрын

Machine used is the one and only Jura ARTgraver.

Alguien podría decirme cómo se llama la herramienta que está utilizando para hacerle el desgaste en la orilla de en donde setting los diamantes ? Por favor

@heinikendude

4 жыл бұрын

Hola Soledad, me puedes ayudarle. Envia me una mensaje info@vandoorendiamonds.com

@glorialamor3607

Жыл бұрын

Se llaman burles una de las marcas americanas son de Mueller. Y grobet

@glorialamor3607

Жыл бұрын

Buriles

@glorialamor3607

Жыл бұрын

En inglés es ingravidez. Los bueileS

@glorialamor3607

Жыл бұрын

Ingraver

5+

@heinikendude

3 жыл бұрын

Thanks!

bhai aangutha he dekhana hai to video koy babae. dakne vale chej to dekhae nahe

lastima el desenfoque de la camara, no se alcanza apreciar bien toda la maniobra realizada, su trabajo excelente.

@heinikendude

5 жыл бұрын

Thanks for the comment!

ya think his thumbs hurt

@heinikendude

5 жыл бұрын

LASTBOYFRND LILSEV haha actually they are fine ;-)

Your finger blocks the final fixation process. Annoying.

@heinikendude

5 жыл бұрын

Final fixation is breading the small prongs over the diamonds ;-)

I'm not trying to be hard on your work because the end result is pretty but look @22:51 and I can see 3 or 4 stones that are not sitting flush with the side of the ring. Which will cause them to rub the wedding ring cause it to scratch the gold of the opposing band or if the wedding ring also has diamonds on the side can cause scratching on both diamonds. Attention to the details is what makes a piece a masterpiece.

@heinikendude

3 жыл бұрын

Thanks for your eye for detail!

Frustrating when the end (the interesting part) is so badly filmed that I couldn't see what you did.