Clever Annette. Thanks Derek & happy Christmas.

2 years ago, i would have been so lost. This would have been so far out of my reach. But thanks to videos like this one, 2 years later, i see this same video and think "oh, super easy! cool, i like how he did that, oh, that's a new move. ok he's going to shell it... yup..." etc. what i mean is....... thanks for the video. videos like this helped me to get a career in engineering for manufacturing.

@CADCAMER

3 жыл бұрын

Watch my video also of same topic uploaded today with added music and subtitles. kzread.info/dash/bejne/dI2ez6Z-h7adorQ.html

Dan Lavoi's Lamborghini Galardo tutorial series is the go to for solid works learning!

hi STC, pls guide me how to make the extrude block look sparkle like stainless steel (like the surface of the coca bottle that you are drawing)???

beauty of design reflexes through your art

You took the words right outta my mouth.

I'll get back to this after I catch up on all those network engineering video's

Muchas gracias por compartir tu conocimiento. Sin duda realizas excelentes tutoriales. Y para las personas que se quejan, es porque son tutoriales para personas que ya saben ubicar las herramientas y manejar el programa más allá de un conocimiento básico, uds deben de ver niveles básicos y aprender antes de querer realizar este tipo de modelado, en lugar de estar insultando al maestro. Me parece que no necesita explicación de forma hablada, la botella me salió a la perfección. ¡Gracias!

Could somebody tell me what do you do to see the pieces shine like that? my pieces are always opaque, I want some pieces to shine but without rendering them

At 14:55 when you created a plane for the bottom cut of the bottle... for some reason every time I created that same plans... the coordinate system flipped and isn't set the same as yours? I'm a little confuse... yes I can find ways to flip the extrude cut other direction but just to be precise on the same step as yours... please give feedback

@iTHeo1

5 жыл бұрын

Same problem... and I can't change the directions of axis

No sounds but very clear. Thank you, I followed your steps and made the bottle in one hour!

@2minutetech899

2 жыл бұрын

you can see this video kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

This may be later down the road, but could we do some plastic tests with the bottle? Or something similar if you have the mold flow part.

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

Are you following some sort of blueprint? If yes, where can I find it? It would help to give more sense to some of your moves. Thanks :)

Thank you for built and shared this video, I wandering that when you build a multiple parts assembly, which model display card is suitable. I'M about to update my computers equipment.

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

Ayuda, ¿como puedo colocar la punta del arco en la tangente del circulo? Helpe please, How I can put the tip of the arc tangent of the circle?

sangat membantu utk yg msh pemula tapi saran saya alangkah baiknya gambarnya di perjernih lg sehingga text kecil bisa lebih jelas terbacanya... trimakasih

Sir, What is the differences between solid modeling, surface modeling and sheet modeling? Please answer. Thanks in advance

I am amazed! wonderful job and use of skills.

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

My opinion again: wonderful for us! Again: wonderful!

@CADCAMER

3 жыл бұрын

Watch my video also of same topic uploaded today with added music and subtitles. kzread.info/dash/bejne/dI2ez6Z-h7adorQ.html

Excellent tutorial sir. How your model image quality is so high and glossy? How to change the model image quality setting?

Why it is silent????

Great job!

damn you dude XD i thought my speakers were out of power and i was f*** made then discover this

@CADCAMER

3 жыл бұрын

Watch my video also of same topic uploaded today with added music and subtitles. kzread.info/dash/bejne/dI2ez6Z-h7adorQ.html

Now I feel like I have no clue how to use solidworks anymore.... after seeing this.

@kushagraroy5081

4 жыл бұрын

Checkout kzread.info/head/PLms4SjOtNO2OUZ8k_TF7wpBCPQJiwKYVy

@CADCAMER

3 жыл бұрын

Watch my video also of same topic uploaded today. kzread.info/dash/bejne/dI2ez6Z-h7adorQ.html

@leo-yw9ok

3 жыл бұрын

I use SolidWorks to complete the modeling, the rendering effect in the video is really good, I hope to learn the skills of model rendering. I come from China, English is not good, with the help of automatic translation software to communicate with friends

Thank u for being a great human being and taking ti to help all of us noobs out cheers

Awesome video and great skills! Thank you very much for the tutorial!

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

you're awesome man keep goin'

Very good tutorial! thanX bro

haces simulacion de flujo de aire? Si conoces a alguien, recomiendalo, me urge.

Excellent video tutorial. Thank you so much for sharing it!

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

I need a coke after watching them skills nice job :)

It works just perfect after your help. Thanks a lot

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

Impressive ! great work

Thank you very much, I learned a lot of knowledge from your video, this video is very valuable, I fully recommend.

@CADCAMER

3 жыл бұрын

Watch my video also of same topic uploaded today with added music and subtitles. kzread.info/dash/bejne/dI2ez6Z-h7adorQ.html

this is pretty cool! gonna try it out , hope it works! thank you

Work of art!!! very well done.

@over-playyt9123

3 жыл бұрын

sen fou

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

Thanks for showing.

This is very good and thanks to you. This is a great skill and very good video. Awesome, again thank you.

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

what was the function of the split line at minute 8-9? could someone please explain. very helpful video thanks

@tomwebb3016

4 жыл бұрын

I know this is late, but it might help other people too. This is used to trace the circle drawn at the top over the uneven surface of the cut underneath.

thanks for your precise lecture. You know this program very high. Admire you. Alex

nice i like it, thanks for sharing!!!!

your perform are awesome ....

the fillet at 18:30 is not working, if u have any explanation or solution plz

How did you make polish surface ?

Great tutorial. Thank you

Wooow .. I tried to make the design, but I couldn't do it as well as you. Simply put, it would be excellent if your film included an explanation with sound and subtitles. In any case, it's a terrific practice for aspiring designers. Thank you for sharing, friends. I will be waiting for feedback from anyone who would like to, thank you.

Nice work! Quotas are real or similar/invented?

very good, this is amazing creation

Can you sketch a gimbal for mobiles?

Sine hvala puno, olaksao si mi.

good tutorial, one question about soft recording. How do you do it? lol

Great tutorial! Thank you!

@Sw-tcNet

9 жыл бұрын

Anna Veselova Many thanks to you Anna!

@spencerferguson6227

9 жыл бұрын

***** you are mean

@spencerferguson6227

9 жыл бұрын

***** k

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

Perfect design

Great work.

Plz sir give a tutorial of ICU medical bed tutorial as soon as possible

Congratulations for 300k subscribers sir

Dear Solidworks Tutorial Use to set the image display quality options: Click Options or Tools > Options > Document Properties > Image Quality. It made smooth circle.

@CADCAMER

3 жыл бұрын

Watch my video also of same topic uploaded today with added music and subtitles. kzread.info/dash/bejne/dI2ez6Z-h7adorQ.html

@michaelzajac5284

3 жыл бұрын

Dear@@CADCAMER , This is fascinating. I'm surprised you are here. I didn't hear music, I am deaf.

Nice work. Thanks a lot

@Sw-tcNet

9 жыл бұрын

Bảo Nguyễn Thanks Bao!

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

Nice tutorial, thank you

@over-playyt9123

3 жыл бұрын

prout

Excelente demostración!! Felicitaciones y muchas gracias!

did your audio track for this get flagged and removed or something?

Hi, I was wondering ; how do make the surface always shine like that. In my solidworks, every extruded part is dull, not shiny like yours.

@CADCAMER

3 жыл бұрын

Watch my video also of same topic uploaded today with added music and subtitles. kzread.info/dash/bejne/dI2ez6Z-h7adorQ.html

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

great job

bro i your work is awesome but ur add is so awesome i watched your full add

Hey nice work

right at 23:47 couldn't you have added a intersection relation instead of re- dimensioning like a n00b

Thank you!

what version of solid works is this?

Nice work

If you just play with 3DSolidWorks on a daily basis for like 1 hour a day then you would understand everything he does. Had to learn this software by myself and I can comprehend his steps well.

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

Excelente tutorial, gracias

which version of solid work is this? :D

Even with no sound but a nice tutorial, I learned a lot. Thanks

Great Video!!!!!!!

Nice job!

Nice one!!

Wow, nice! Thanks!

@unodernier

6 жыл бұрын

Hirudin

great job thank you

je te remerci sur la qualité du travail, moi aussi j'ai une chaine youtube pour debutant sur solidworks, merci encore une fois. I thank you on the quality of work, I also have a youtube channel for beginners on solidworks, thank you again. أشكركم على جودة العمل ، ولدي أيضًا قناة youtube للمبتدئين في Solidworks ، شكرًا لك مرة أخرى

@2minutetech899

2 жыл бұрын

see this videos kzread.info/dash/bejne/foF42ZSFgqqrfJs.html kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

Can you make an assembly where there is a bottle.cap that can be rotated off?

@Sw-tcNet

4 жыл бұрын

exactly what you want is here: kzread.info/dash/bejne/lWWAwaWxYMrciJM.html

can we download this programa? is there any trial edition of that?

at 2.24 ....what is the shortcut key for "make tangent" option? can anyone help?

Da este interesant si tine de domeniul desenului tehnic,urmaresc dar nu stiu daca am cistig din aceasta activitate?

Any tips? I’m a newbie learning

can you tell me what computer you use for solidworks, i went to the system requirements but i don't know what computers have the right graphics card

@PerformanceEngineering

9 жыл бұрын

rama1234ish The minimum I would suggest is a Core2Duo, 8Gb RAM, and an nVidia Quadro video card, for basic parts and assemblies. You can pick up an old used "starter" Quadro card, such as an FX1700, off an auction site for the price of a couple of beers.

this tutorial is very nice sir

Solid works how to install window7 system anna

May I know how come all of a sudden your "Fillet 1" feature is gone at 13:43 ?

@neoseeker02

4 жыл бұрын

Yeah, it was questioning, but I think they probably did another recording or something while editing this tutorial video, which is why they had to redo the fillets at 13:43 even though they did it earlier in the video.

Очень круто, спасибо за переданный опыт

Esto seria nivel DIOS 😎 impresionante manejo de SW cuantas horas le dedicas para manerjarlo asi?

@2minutetech899

2 жыл бұрын

you can see this video For more experience kzread.info/dash/bejne/poFhpcWzeLXZaMo.html

Congratulations already subscribed here.

Hello sir,This video very helpful for our Design Study.Thank yo

Musica celestial. Tanto la cancion, como la del manantial !

Whenever I try to do that 8mm fillet at 25:12 it removes the swept surface

My geometry does not twist all the way around the helix like yours does @24:00

@user-cy7so3ot9q

2 жыл бұрын

That's bc the starting point for the helix curve is not same as the trapezoid he drew on 22:57, you can try write the degree to 0 or 90 at 22:36(when you are creating the helix curve)

Wooo! very good.

Awesome video thanks

Can you possibly speed it up a little? That way I wouldn't be able to understand anything that was going on.

using thread function directly will make it easy in last part

This is cool.