Thanks for watching. Below are links for paper ball making and thermocol / styrofoam ball making for solar system projects. Shiny paper ball making: kzread.info/dash/bejne/gIqJscWgYdKyfZM.html Paper ball making: kzread.info/dash/bejne/nGp8zc-dhNWslpc.html Thermocol/Styrofoam ball making: kzread.info/dash/bejne/nWdsx6SKhrWWZKw.html

@anitapawar3196

2 жыл бұрын

How the light is appearing in sun

@navyasharmalittlegirl4118

2 жыл бұрын

I love it 💕

@navyasharmalittlegirl4118

2 жыл бұрын

So helpful

@saiiniyan1521

2 жыл бұрын

How asteroids belt hanging

@diyasfunplay

2 жыл бұрын

There is bulb inside

Thanks for watching. If you like the above video, you may also like the below videos. Please check it out if time permits...... BrahMos missile model making: kzread.info/dash/bejne/kZVpl9urabyWpNo.html Army truck/Military vehicle model making: kzread.info/dash/bejne/k2irq8SefMfXmtI.html Space shuttle model making: kzread.info/dash/bejne/lHmJzqRqeKWZfpc.html Aircraft carrier model making: kzread.info/dash/bejne/Ym2Ao8xuoJqzhrQ.html Apollo mission model making: kzread.info/dash/bejne/fJxo2aqcl7K3c6Q.html Falcon 9 model making: kzread.info/dash/bejne/hqSb1ZqEfMzfqKg.html Skyroot Vikram rocket model making: kzread.info/dash/bejne/pnZkl5l7YM-Tibg.html Agni V missile model making: kzread.info/dash/bejne/d66frdiHd8_cXaw.html RLV-TD model making: kzread.info/dash/bejne/qWWJm7GFnpu0fLw.html Solar system working model: kzread.info/dash/bejne/kWmJxaWIpsnTd9o.html Apollo lunar module model making: kzread.info/dash/bejne/aX-s0LVtncefodY.html GSLV model making: kzread.info/dash/bejne/dHaIpLqvcdC6ZbQ.html M1A2 working tank model: kzread.info/dash/bejne/eGaBltumkrufY5M.html Airplane black box model: kzread.info/dash/bejne/iplsz9eSiKm6qaQ.html Sukhoi Su-30MKI model making: kzread.info/dash/bejne/l6qZ2cmTkprbZMo.html GSAT-30 satellite model making: kzread.info/dash/bejne/omdkrK-Pia-snKg.html Saturn V rocket making: kzread.info/dash/bejne/oKaulNCBhaTVibA.html Launch pad for rocket making: kzread.info/dash/bejne/iGt8ybiClafTmbw.html Rover on moon model: kzread.info/dash/bejne/eaBn0MmIfabfYLQ.html Aryabhatta satellite model: kzread.info/dash/bejne/rH6lybmhetqTodo.html ISS (space station model): kzread.info/dash/bejne/l3-clcOHpLSdnbQ.html Mangalyaan-mars orbiter mission model: kzread.info/dash/bejne/eaaYt7WAirWrZpM.html Vikram lander and Pragyan rover working model: kzread.info/dash/bejne/iK2jwbCiqrzUlqw.html Drone working model: kzread.info/dash/bejne/Y4B8upWpc7qzirA.html Paper airplane model making: kzread.info/dash/bejne/qJacy6uwlL2_dZM.html Gaganyaan model making: kzread.info/dash/bejne/lpiMuq6PeLTAacY.html PSLV model making: kzread.info/dash/bejne/noynm6WOqNvRfcY.html GSLV MK III model making: kzread.info/dash/bejne/h3eNkrVup9TAcag.html

@nidhibhojanaik2494

2 жыл бұрын

Nice...

Solar system explanation: kzread.info/dash/bejne/m6J2tMaHqLnTn9Y.html

Thank you so much for this video and what is the principle of this working model

How do you hang the planets? where does the thread go inside and how do you put it in?

Your model is excellence with explaination

@diyasfunplay

Жыл бұрын

Thanks a lot

Hi I love the model but I have a question after the model was done how did you Hang the plants and rocks upside down

@P.nakshatra

10 күн бұрын

I think he may have hot glued the rocks together and sticked a string

Bhaiya...us cardboard setup ko upside down kaisai krai?

This is such awesome work...amazing! Quick question - how did you secure Saturn's rings around the foam ball? I am assuming you used poster paper for the rings so I don't understand how glue could hold the rings section around the foam ball? Please explain. Thanks!

@ushasree545

Жыл бұрын

You can prepare a ring with the thick A4 sheet of the same size of the Saturn. No need to stick.. I tried it

Did you use another light(red light) to make it prettier?...?

Nice working science model

@diyasfunplay

3 жыл бұрын

Thanks

thanks it was great now i know where to go for help

@diyasfunplay

3 жыл бұрын

You are welcome! 😊 Thank you too!

salutations, Diya's Funplay. particularly beautiful video. thanks. :)

@diyasfunplay

3 жыл бұрын

Thank you very much 😊

Beautiful

@diyasfunplay

Жыл бұрын

Thanks

Great ❤️

@diyasfunplay

3 жыл бұрын

Thanks a lot

Very nice good job

@diyasfunplay

3 жыл бұрын

Thanks a lot

Very very nice sir working solar system

your stuff is amazing🙂

@diyasfunplay

10 ай бұрын

Thanks a lot 🙏

Thank you so much sir ☺️☺️❣️ I try this modal and it,s was febleous 🥰 once again thank you so much 🥰

@diyasfunplay

Жыл бұрын

Thank you too

@nazminansari6939

Жыл бұрын

Heyy...! I have one question plzz how did u fix the motor on thermocol I fix it with glue gun but it's not fixed !!

@nazminansari6939

Жыл бұрын

The whole sheet was fall down except motor sheet ! So how can I fix those both ?

@nazminansari6939

Жыл бұрын

@@diyasfunplay plzz reply

Thank you very much mujhe science experiments ke liye Aisa video chahiye tha ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

@diyasfunplay

3 ай бұрын

Thanks a lot 🙏

Wow 👌👌👌

@diyasfunplay

2 жыл бұрын

Thanks 🤗

WOW!!!! Solar system

@diyasfunplay

3 ай бұрын

Thanks a lot

Very nice

@diyasfunplay

3 жыл бұрын

Thanks

How to hang the thermacol part which is rotating

Wow..🤩How you Hang the planets around the sun please reply soon

Very Nice❕

@diyasfunplay

3 жыл бұрын

Thanks 🤗

Nice❤

Wonderful video, Thank you so much for ur work! I got stuck at the upside part where it was hanged? Can you please suggest? I'm doing a project for my daughter,, pls reply

@diyasfunplay

Жыл бұрын

Please go through the thermocol pieces that i have shown in the video a few times. There are 2 thermocol pieces. planets are hanged to the bottom piece. And the top piece is attached to the roof. Both the thermocol pieces are connected through a dc motor.

@ushasree545

Жыл бұрын

Thank you for your reply.. I got confused to which roof the motor shaft thermocol is attached.. But currently I'm using the carton to attach... Will update once done.. Thank you once again for the video

@ushasree545

Жыл бұрын

My daughter's science project was success. It happened only bcse of this video😊. Thank you once again for uploading

@laylathabee

Жыл бұрын

@@ushasree545 How do you hang the rotating thermocol with the dc motor?

Where did you hang the thread for the planets?

@diyasfunplay

29 күн бұрын

The threads are tied to the wooden sticks on the top.

Its awosome

@diyasfunplay

3 жыл бұрын

Thanks a lot

Thank you sir

Nice

@diyasfunplay

3 жыл бұрын

Thanks a lot....

Plastic ke ball pe colour kaise krne ka direct apply kr skte hai kya ya tissue ppr lga ke colour apply kre please suggest me

@diyasfunplay

9 ай бұрын

You can pint directly on the plastic ball. Use poster colours.

Can you please tell me the sizes I should use to make these planets?

@susisusilawati100

Жыл бұрын

Yes

You deserve 1 M like

@diyasfunplay

3 жыл бұрын

Thanks a lot 😊😊😊

@lolgamingpubg6110

2 жыл бұрын

No 200000000000000 likes

It is a very good model but where have you hanged the planets

@diyasfunplay

11 ай бұрын

on the roof

Thanks bro

@diyasfunplay

2 жыл бұрын

All the best

@The_ARTISTIC_AREANA

2 жыл бұрын

@@diyasfunplay thanks

Did you hanged the planets on the roof ? I have a school project so can you tell me where i can hang the planets

@diyasfunplay

2 жыл бұрын

Yes. For school projects, you can make an "L" shaped arm and hang on it.

It will be great that you show the up part last

Very nice bro keep it up 😀😀

@diyasfunplay

3 жыл бұрын

Thank you, I will

Thanks

@diyasfunplay

10 ай бұрын

Thank you too 😊😊😊

How to tie the thread to the planets as they are made from paper

@diyasfunplay

Жыл бұрын

No, there are thermocol planets.

I want to get that!

Can you please tell from which shop you bought glass pot

@diyasfunplay

2 жыл бұрын

You can get it in an aquarium shop

Planets Wow

@diyasfunplay

3 ай бұрын

Thanks a lot 🙏😊

Which type of dc motor you have use in the video

Na próxima vez põe um foguete 🚀 🚀

How you hang these planets

Where did u tie all of them after making solar system pls tell pls

@diyasfunplay

Жыл бұрын

Fixed to the roof

Nice you are so brilliant 👌

@diyasfunplay

3 жыл бұрын

Thank you so much 😀

How tou hanged the planets in thread ?

Pls how did you place the asteroid belt

And can we use ping pong ball instead of thermocol ball

Please make a can rocket

@diyasfunplay

3 жыл бұрын

Will try...

@lolgamingpubg6110

2 жыл бұрын

Ok

Bhaiya how can we hand can we hang on a stick fevickiked by cardboard

@diyasfunplay

2 жыл бұрын

Yes you can

We can use any DC motor

@diyasfunplay

Жыл бұрын

Use slow rpm dc motor

Can you tell me that how much litre glass pot you take for make sun

@diyasfunplay

2 жыл бұрын

Its 3 litre

@rahulsheokand3502

2 жыл бұрын

Can I 3.5 litre pot for making sun

@rahulsheokand3502

2 жыл бұрын

@@diyasfunplay thanks sir

How did u stick the threads

@diyasfunplay

Жыл бұрын

You can use a tiny hot glue and place the thread on it, or tie a thread to a ball pin and insert the pin into the ball.

Mam how many dc motor have you used 1 or 2

@diyasfunplay

Жыл бұрын

only 1

Which motor you used

@diyasfunplay

11 ай бұрын

Slow rpm dc motor 12 v

@Astrophlie14

11 ай бұрын

can we use any other motor

Can you please tell the list of materials required ??

@diyasfunplay

3 жыл бұрын

Items needed: Thermocol balls /styrofoam balls, Broken/waste thermocol pieces for asteroids, Acrylic or poster colours, Glass bowl for glowing sun model, Black thread to hang the planets, Slow rpm dc motor. I have listed out all these items in my Amazon shop (if you want to buy them online) Link is given in the description box.

what is the giving support to rotate the thermocol sheet

@diyasfunplay

3 ай бұрын

DC motor is fixed to the thermocol. Small thermocol is fixed to the roof in my setup. You can also make a cantilever support out of cardboard if you're making this for school project.

@balajiguturi6938

3 ай бұрын

thanks

model is supar out standing. aap ne Pura nahi bataya .

@diyasfunplay

10 ай бұрын

Thanks. What is missing???

How many dc motors are used

@diyasfunplay

11 ай бұрын

one

How did u hang those planets over the sun

@diyasfunplay

Жыл бұрын

I have shown a round thermocol with sticks on it. The planets are tied onto the sticks. The thermocol is fixed to the roof. If you are doing this for a school project, make an arm setup to hang the planets.

Bhaiya kaisai tie krai thread ko planet sai upr....plz tell ???????

@diyasfunplay

2 жыл бұрын

Add a small hot glue on the planet and place the thread on it. Thermocol balls will be ok. If you're using paper balls, tie a thread to paper pins / ball pin, and insert the pin into the planet.

How to buy this model?

How many dc motor you have used

@diyasfunplay

Жыл бұрын

only 1

Which Dc motor you have used

@diyasfunplay

Жыл бұрын

Slow rpm dc motor

How to balance the solar system will it fall from top

@diyasfunplay

Жыл бұрын

Its all made of thermocol (very light in weight). No weight balance issues here.

Please can you share the video of making national symbols of India using grains . Please 🥺

How it is from top ples tell I want to make it

Can this be made in 3 days????

@diyasfunplay

3 жыл бұрын

Yes you can. You can finish it in a day if you have all the required materials ready.

Did you ues any spotwiht this?

how do you have join the all planets upperside

@diyasfunplay

2 жыл бұрын

I have tied up the planets to the sticks that are attached to the circular thermocol piece at the top.

Bhai aapne tharmochol foam ball kaha se laye

@diyasfunplay

3 жыл бұрын

You can make it or buy online. kzread.info/dash/bejne/nWdsx6SKhrWWZKw.html

Where did you hang the thermocol which is rotating

@RohitSingh-ct7wl

15 күн бұрын

Please reply me soon because I complete this model on 3/6/2024

@diyasfunplay

14 күн бұрын

Thermocol is fixed to the roof in my model

Ooo yea. 😀

How to hang planat in thiread

Project

How you have setup i am not able to understand

@diyasfunplay

2 жыл бұрын

All the planets are suspended by strings from above. Have shown in the video.

How it flies

@diyasfunplay

Жыл бұрын

Its hanging from the top with threads. A dc motor is turning it slowly. Have shown it in the video.

I am little confused first u showed the planets are moving from a stick plug into thermocol than u showed the planets are hanged with threads

@diyasfunplay

Жыл бұрын

The thermocol is fixed to the roof. The planets are tied to the end of the sticks in the thermocol.

Please make assignment on it

Where did you hang the planets

@diyasfunplay

9 күн бұрын

Onto the roof.

How much is that dc motor and where do we easily get it

@diyasfunplay

Жыл бұрын

Around 300 rupees in amazon.

Thank you for your wonderful model . I took this model to my school for science exhibition and I have won the first 🥇 prize 🏆 . This is Really a brilliant work

@diyasfunplay

Жыл бұрын

Great job!

@adwithbangera7979

Жыл бұрын

@@diyasfunplay thank you

@adwithbangera7979

Жыл бұрын

Please can you share the video of making national symbols using grains

@naazain9362

Жыл бұрын

@@adwithbangera7979 isko banane me aapko total cost ktna pada?

@precious.99

Жыл бұрын

@@naazain9362 1000+

How slow does the dc motor should be

@diyasfunplay

2 жыл бұрын

Around 60-90 rpm

How to hang plants

@diyasfunplay

5 ай бұрын

with threads

I can't understand that how planets are rotating how you rotate that planet??

What can we use instead of glass bowl ??

@diyasfunplay

3 жыл бұрын

Use a transparent round balloon

@time.pass289

2 жыл бұрын

But if u use balloon then it will not effect that bright sun

Please make chicxulub Dinosaur killer Asteroid model

@diyasfunplay

Жыл бұрын

Will try

Wow this deserves WAY more views

@diyasfunplay

3 жыл бұрын

Thank you very much

@Ujwala_Rajput

3 жыл бұрын

Yes you deserve

My favorite planet is jpiter

@lolgamingpubg6110

2 жыл бұрын

My also

I seen 7:06 Amazon but I didn't find the motor

@diyasfunplay

3 ай бұрын

amzn.to/4bNLww8

How did you join the asteroid belt??

@diyasfunplay

3 жыл бұрын

I have used a thread

i am not getting slow rpm dc motor

Ye Stone real h,,,agar bana hua h to kaise bana ye....plzzz jaldi bataye kal project dhekhana h... plzzz

@diyasfunplay

2 жыл бұрын

I have shown how to make an asteroid model in the video. Pls check.

How you have rotate all the planets please answer

@diyasfunplay

Жыл бұрын

With a dc motor shown in the video.

But there is one problem that we can't take or send it out because it is big and very sensitive so I am not saying that this is a bad idea but still it is hard to travel with it

@diyasfunplay

2 жыл бұрын

You can make a small model if you like to carry it with you.