This video did for me what a forum of pressure washing pros could not. Thank you sir, from Nashville, TN.

@amandadavis9726

4 жыл бұрын

Michael Negri that’s awesome, lol!!!

@silverstake88

Ай бұрын

Same. Almost like they don't want us to know....

Thank you for this video it saved me from losing my mind I did not know my Spring and Orpheus came out of my xjet

Great video! Thank you for walking through everything

Great video. Thank you for explaining this. I'm looking at adding one of these to my tool box.

Thank’s Mark for a great video.

Excellent video!

finally a good explanation, Thank you.

Perfectly explained , thank you

I bought my M5 used for $25. It didn't have the spring but still works great.

Thanks from the state of Virginia, USA!

Very educational video, thank you.

Thanks for the easy to follow video 😊

Great video thanks for sharing!

I have a 4000psi 4gpm pressure washer and looking to get a sh ratio of close to 1% out of xjet. Do u fill up the bucket with just sh and put correct proportioned on xjet to get my 1%

I've added as much as 150 ft of hose to the m5 and have no trouble getting it to feed SH through. They are expensive but worth it until someone comes up with something better. Thank you John Doherty LykeNew power wash Salina Kansas

@jiffyclean9429

5 жыл бұрын

John D ever ran a thick substance through it? For instance I use a foam accelerator.

@johnpressurewashingpaintin9066

4 жыл бұрын

you can use it on roofs if you go with a smaller 2gpm pressure washer

Super helpful

My xjet came without the internal orifice and spring in it, will it still work?

To rinse just disconnect hose? Would it get air and affect power?

Do you need to buy the xjet setup or just the m5 nozzle?

Very well explained...now I comprehend 🙂

I just got an XJet M5 and the little coloured proportioners do not fit inside the barbed end (the barb is too big) but they fit snugly inside the quick-release male connection

Hi, if i gonna use 3000 psi with this, will i have the same effect as 1000 psi?

I have a 3000 psi 5.5 gpm Pressure Washer, using NO proportioners and straight SH from a 5 gal bucket… what would be my draw percentages using 12.5% SH and 10% SH?

Can you put hydrofluoric acid through this?

Do you havre to have a 12v pump and soft wash system to use this or can I use it on my 4200psi 4gpm to apply Sh.

appreciate the video sir

I'm looking one for a 21 lpm pressure washer.Can't get one anywhere.do you's have them in stock?

Great video I really like that how can I get one

Do you sell one set up with a handle

How can i make this fit my nilsk e145 ?

Can an x jet be used to spray chemicals onto a driveway?

Will this product dilute chemical’s and if so by how much? Thank you.

How much for M5 x jet to be used with Karcher K4 presure washer

Were can I get one from and how much

We’re can I get one from

I wonder if you’re up on a roof and the vacuum draw is diminishing, you can use the next orfice up in order to account for less draw

@silverstake88

Ай бұрын

EXCELLENT question!

Hi Can you please send me the link for this items to buy Thanks

What's the size of the orifice of a 2.5 gpm xjet?

Do you use the proportion tips that come with the X Jet..at 4gpm how much SH will I be getting if I pull form 100 SH non mixed?

@coachnate5747

Жыл бұрын

1.6-1 . Around 3%

Isn't this the same as a foam cannon

Do you use the proportion tips? I want as much chem as possible what are the ratios

@coachnate5747

Жыл бұрын

3-3.5% max

Is There A Maximum Strength Of Sodium Chloride??

Hello. Thanks for the video. Question about the proportioners & diluting your mix... I am extremely confused on this. Say I have a house washing mix of 2 gallons of 12.5% SH + 3 gallons of water (in a 5 gallon bucket). The proportioner will determine how much of my 5 gallon mix (3 gallon SH + 2 gallons water) is actually being sprayed onto my surface I am trying to clean? I really don’t get the proportioner part. If you could take the time to explain that a little more in depth for a noob like myself I’d appreciate it. Edit: Are the proportioners only used when you have straight (non-diluted) 12.5% bleach in a 5 gallon bucket. As in 5 gallons of 12.5% SH in a 5 gallon bucket. I’m not sure why you’d use the proportioners if your mix is already diluted with water? Ex. 2 gallons SH/3 gallons water in a 5 gallon bucket.

@jiffyclean9429

5 жыл бұрын

big boy bobby just keep the proportioner out and dilute your mix

@michaelnegri6274

4 жыл бұрын

I’m a total noob too so I appreciate any information. About to get a business going and very excited. I’ve been trying to decide wether I should get a $600 12v setup or just DS with the xjet and 5 gallon bucket. Why do people choose the 12v setup? Is it the bucket?

want 1

i use it for everything 2.5% for homes with my 4gpm and i do roofs with it with my 2gpm and im getting 5% SH

@GreenLiiine

2 жыл бұрын

What ratios on a 5 gallon bucket . If I want 1%, 2% , 3%

Do you have a xjet for a 3200 2.5GPM power washer

@rahn6869

Жыл бұрын

I got mine on Amazon

I recently purchased an X-Jet M5 and I am having trouble with it being loose on the end of my lance. It spins around very easily. Also I don't think that It is shooting as high as I expected it to. I have the blue and pink 2 story tips that seem to reach higher. Can you tell me what I should do about these issues. And yes I ordered the correct size as I have a 3100 Hp pressure washer. I do love the fact that I am not down loading and I can adjust the chemicals.

Can u actually explain it while your actually connecting and using it

Video would be better if you'd get rid of the remarks on the right side of the page it show your full video picture

Ok

Bought one of these X-Jet M5s a few days ago and used it for the first time yesterday. Got to say it is well worth the money. highpressurecleaninggoldcoast.com

@markcave6016

6 жыл бұрын

Jamie Prout Thank you for the kind feedback I’m pleased you’ve got value for money and happy with the product. Thank you for spreading the word