Definitely found this video helpful as I put together my R3 pro. Only thing is I oriented my esc differently but everything went together amazingly. Thanks!

@WTFRCCars

Жыл бұрын

Glad it was useful for ya :)

I just got same roller and motor/esc set up today in the mail. Thanks for the video about installing the motor and pinion. 🤦‍♂️

@WTFRCCars

Жыл бұрын

Seems to work well together :)

Hi I just got a snrc r3g It is easier to take out the 5 screws that hold the motor mount in then attach motor and pinion to the mount .Then put motor and mount and pinion back in 5 screws .

@WTFRCCars

Жыл бұрын

Yeh swapped it at the track and found if you back the motor screws almost all the way you can just remove the pinion and swap in the new one :)

that does look a really nice chassis mate saw it when you were down at rd models , cool video 😎

@WTFRCCars

Жыл бұрын

Yeh drives really nice too

Can you adjust the battery clamps to accomodate shorty packs?

Thanks for this video! I have same chassis and i bought for upgrade fron suspension this parts: SNRC 929058 (multi link suspension like x4 or awesomatix triangle) And after one stage in my city (TC10 17.5) i found very serious trouble with steering: after light crash turnbuckle get out from ball end's and after 2-3 collisions modells pulls to the left or right side. (i will test with yokomo ball ends, i bought for yokomo yd2 and try it out on weekend maybe its help) And if you can please tell about setup front suspesion arms/shock absorbers idk how to win this puzzle. Thanks and my best wishes!

@WTFRCCars

Жыл бұрын

Having only driven it in a few races it's been great so far, I haven't changed any of the setup apart from making sure it's all assembled correct. I'm still trying different setups

Nice video ! How about driving and maintenance? Did you ever encounter issue with frequently breaking belt? I have one, cool, the only complaint is the motor mount - the top 4 screws are way too close so when belt carries small rock or grit into spur gear it cannot get out thus being stuck and destroy belt easily. Tension adjustment does not help.

@WTFRCCars

Жыл бұрын

Only had chance to run it a few times so far, 1st run front hub broken on a impact with the track barrier, 2nd run front arm broke with impact with track barrier, and it's very under geared with the stock spur but does driver very nice so I'll have to see, spare parts are crazy cheap and very easy to get too from AliExpress

hello, did you install the sway bars, might have missed it, it looks like the front sway bars will hit the drive shafts, did you install it over or under the drive shafts?

@WTFRCCars

Жыл бұрын

I'm not running the sway bars on mine yet

hello brother I see you installed the reciever that has the auto steer function to straighten it out if it spins out, forgive me for not remembering whats its called, but does it make a huge difference having that function?

@WTFRCCars

Жыл бұрын

Inr4 GYB but you can't run the stability control in any race they are not allowed

Ive been thinking about getting one of these for club racing. Only issue im seeing is how the motor mount only allows for scres that are at the bottom? The motor our club runs with is G27 brushed. That motor only has screw holes that are opposite sides. Would it be possible to mount this motor or not?

@WTFRCCars

11 ай бұрын

It's always possible to make a motor fit it's just going to take a bit of work as this like all touring cars is supposed to run a brushless system :)

@MrNascarfan1

11 ай бұрын

This is what you will need, we use tamiya torque tuned at track I race and everyone has this.

@MrNascarfan1

11 ай бұрын

It never sent but the yeah racing brushed motor mount

Is there any place that sells this in kit form? Or is it only available pre-assembled?

@WTFRCCars

7 ай бұрын

I would think AliExpress is more likely to have em

Hi, what dual lock have you use for the ESC?

@WTFRCCars

8 ай бұрын

3m but it only works for lighter esc's anything heavy and it will fly out on an impact :)

I hear X-ray t4 arms and hubs fit

@WTFRCCars

11 ай бұрын

Interesting.

@MrNascarfan1

11 ай бұрын

Do you have the part # for them? I want to get it so I feel more secure of them not breaking

Hey there. What 25T servo horn do you recommend for this car? I just received my R3 Pro but it only came with the 23T servo horn and my savox servo is a 25T. Keen for your suggestion, hoping to get in some driving this week! Thanks!!

@WTFRCCars

Жыл бұрын

Any of the alloy ones work some people say only to use a servo saver but I've not had any issues not running one

@duffyrides

Жыл бұрын

@@WTFRCCars thanks I see that Amain has the protek aluminum horns available. I’m guessing those will work ?

@WTFRCCars

Жыл бұрын

Yep any with multiple holes for the arm should work or the adjustable ones even better

@CarlosDelaoGunEngraver

Жыл бұрын

​@@duffyrideswhat servo horn did you get? did it fit? if so please share a link

@WTFRCCars

Жыл бұрын

It's still running the arrowmax but I'm not impressed with it as the screw is crap and won't tighten the clamp up

Why not remove the top deck when installing motor

@WTFRCCars

Жыл бұрын

It would still get stuck in the lower alloy part I've tried it :(

does it have a servo saver?

@WTFRCCars

Жыл бұрын

No I've not yet for a touring car that does

hello, since getting it 1. what parts do you find yourself needing as backup parts, and what upgrades/tweeking does it need?

@WTFRCCars

Жыл бұрын

All I have done is set it up using the set up station and got some spare front hubs as one got broken in a very fast crash with another RC that had spun and was driving the wrong direction on the track, does drive really good though :)

First to comment! thanks for sharing

@WTFRCCars

Жыл бұрын

Lol :)

Do you know if the diff has steel gears or aluminum? I don’t want to buy the gears if I don’t need to

@WTFRCCars

6 ай бұрын

Hi sorry it took so long for me to reply I had to check the manual the stock parts are the steel gears 990110-f and the option parts are alloy 990110-al :)

@MrNascarfan1

6 ай бұрын

@@WTFRCCars thank you so much!

@WTFRCCars

6 ай бұрын

@MrNascarfan1 no worries 😁