In this video I will take you in depth into getting started with the Snapmaker A250T! I will take you right from the unboxing all the way through the general machine assembly and right into your first 3D prints with the 3D printing tool head. Future videos will cover the CNC and laser tool heads since this is a 3 in 1 machine.
Snapmaker sent me the A250T along with their enclosure to test and right out of the box it is obvious this is a very nice machine. Lots of thought went into most details of the equipment and the frame and motion system is very rigid to accommodate the stresses of the CNC machine tool head. However, in this video I will only be covering the 3D printing module to keep the video to a reasonable length.
I will show you how to setup your first job for 3D printing with both the hardware and getting started with the Luban slicer. We will connect the Luban slicer to our machine over WiFi and transfer our gcode files to the printer.
In addition to this setup guide and review, I have designed and made available two new modifications. The first is a dual fan duct to improve the effectiveness of the original (small) part cooling fan. The second upgrade is the necessary adapters to fit a larger and more powerful 4010 radial fan for improved part cooling.
You can support my work by purchasing these parts from me here:
► hembracemaking.com/products/sn...
You can find the free multi duct adapter here for download:
► www.printables.com/model/4591...
You can find the installation instruction guide for those parts here:
► • Snapmaker A250T / A350...
If you are looking to participate in the #modularsmartlamp project, take a look here and download the files, modify them as you like, and get started:
► www.printables.com/model/4592...
If you make one, be sure to use the hashtag and post the "make" on Printables if you can!
If you are looking for products or items I've used with the A250T in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
Snapmaker A250T:
► amzn.to/41qGq3q
Cut to length velcro cable ties:
► amzn.to/3Lk2Pdb
4010 Radial Fan 24V
► amzn.to/41NxQvn
Bulb Socket - Corded with Switch:
► amzn.to/3Agj98y
Vocolinc Smart Bulb:
► amzn.to/3V44iYj
Electric Screwdriver Kit
► amzn.to/3WhkTYk
Digital Measuring Calipers:
► amzn.to/3WddZnd
3 Speed 90,000 RPM Electric Compressed Air Blower
► amzn.to/3jnfzEb
Thank you ‪@Snapmaker‬ for generously sending me your product!
0:00 Intro
0:50 Unboxing
2:00 Assembly
12:07 3D Printing Setup
14:17 Luban Slicer
15:56 First Print
18:23 More Prints
23:42 Part Cooling Upgrades
28:06 Modular Smart Lamp Project
32:56 Review
37:00 Outro
#snapmaker #3dprinting
****************************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► www.paypal.com/donate/?hosted...
By supporting my channel you are encouraging me to continue with this time consuming endeavor.
Follow me on Instagram!
► / embracemaking