sn95 mustang 10.1" head unit and heater relocation
installing a xtrons TM100L android 10.1"
Жүктеу.....
Пікірлер: 47
@gamercraft8462 жыл бұрын
Hey you inspired me to attempt it in my car I spent weeks watching and researching on how to install and how it’ll look in the car man this great thank you
@AndyFromm
2 жыл бұрын
No problem, I think the worst part is remounting the hvac controls solidly. 👍
@ghostfacekilllahh
2 жыл бұрын
how was it
@kyjohns82712 жыл бұрын
Your text commentary is great fella! 😂
@AndyFromm
2 жыл бұрын
I had to go watch it again lol, thanks 😄
@talknstang4002 жыл бұрын
i installed a 10.6" screen in mine built into the console. I want to upgrade to a larger screen. I was big into car computing
@AndyFromm
2 жыл бұрын
Nice, any pictures or videos?
@meking3258 Жыл бұрын
Radio actually fits in the double din conversion kit just fine ..no mods needed 👍🏽like a glove ...literally
@caesar8624 Жыл бұрын
Thank you!
@austintyndall12462 жыл бұрын
Do you have to move the heater controls or is that just a thing most people do?
@AndyFromm
2 жыл бұрын
I think it would be fine not moving them but it might be difficult to get at them with the screen in the way.
@austintyndall1246
2 жыл бұрын
@@AndyFromm well I have a 97 and I was just looking around for Different setups and all. This one caught my eye. I might look into it more
@AndyFromm
2 жыл бұрын
@@austintyndall1246 thanks for checking it out and good luck to whatever you end up doing 👍
@gekkoman48533 ай бұрын
Where was that second black wiring harness??
@AndyFromm
3 ай бұрын
Mine was just down on the right
@gekkoman4853
3 ай бұрын
@@AndyFromm ahh, well I can’t find it. I pulled the amplifier out. Is there any way you can show or is the car no longer there?
@AndyFromm
3 ай бұрын
@@gekkoman4853 i don't know if it's a different year thing? I don't even know where the amp is on these. my plug was right there, I wouldn't be able to show it any better.
@AndyFromm
3 ай бұрын
@@gekkoman4853 i did some googling, if the amp is where it showed me, there can't be that much wiring to follow back.
@gekkoman4853
3 ай бұрын
@@AndyFromm yeaaa, the connector is different than the one that was provided. I’m convinced I have the wrong part now lol
@tulariusbridges7682 Жыл бұрын
What’s the park called that’s holding the radio and where can I find it ?
@AndyFromm
Жыл бұрын
Simgle din radio cage, i think they are pretty much the same but i came up with xtrons FRA002. There is some on ebay. 👍
@tulariusbridges7682
Жыл бұрын
Ok thanks
@AndyFromm
Жыл бұрын
I ment to say, I think the xtrons cage is about the same as other regular aftermarket radio cages.
@C.Mustang1988 Жыл бұрын
how is the radio lasting n doing
@AndyFromm
Жыл бұрын
Still working great, don't get much time to drive the car though
@editsbyjun7 ай бұрын
Do you have a link for the screen?
@AndyFromm
7 ай бұрын
No, I don't think they sell it any more.
@cliffjumper56212 жыл бұрын
Whats the wire harness you used in the video ?
@AndyFromm
2 жыл бұрын
I think it was similar to this one, I couldn't find where I bought it from to be sure. amzn.to/3ivQLWZ
@cliffjumper5621
2 жыл бұрын
@@AndyFromm thank you 👍
@AndyFromm
2 жыл бұрын
@@cliffjumper5621 no problem 👍
@mayracingandfabricationco.203 жыл бұрын
Andy, where to buy and is the screen "touchscreen"?
@mayracingandfabricationco.20
3 жыл бұрын
LoL. You answered my question at the end of the video other than where to purchase.
@AndyFromm
3 жыл бұрын
@@mayracingandfabricationco.20 I believe I bought this off ebay but it may not be manufactured anymore because it is a few years old now. For what its worth, they have a website. xtrons.com/ Thanks
@Weber19872 жыл бұрын
Which head unit did you use
@Weber1987
2 жыл бұрын
Is it a double din unit or single din?
@AndyFromm
2 жыл бұрын
@@Weber1987 xtrons, this was a single din.
@kenthawkins24184 жыл бұрын
Your "paws"...they're just TOO big for this kind of job!😁
@AndyFromm
4 жыл бұрын
Lol, they get pretty scratched up
@djad_pr94613 жыл бұрын
Radio 1din?
@AndyFromm
3 жыл бұрын
Yup
@jamesflowers45082 жыл бұрын
Looks kinda stupid with it not being flush
@AndyFromm
2 жыл бұрын
I know but it's too big for that without cutting it all up. I had it from a different vehicle.
@MohammedAli-zm7qy3 жыл бұрын
Is it work with 2003 ?
@AndyFromm
3 жыл бұрын
The trim piece is a little different on a 2003 but could be made to work or install the trim from a 1998.
Пікірлер: 47
Hey you inspired me to attempt it in my car I spent weeks watching and researching on how to install and how it’ll look in the car man this great thank you
@AndyFromm
2 жыл бұрын
No problem, I think the worst part is remounting the hvac controls solidly. 👍
@ghostfacekilllahh
2 жыл бұрын
how was it
Your text commentary is great fella! 😂
@AndyFromm
2 жыл бұрын
I had to go watch it again lol, thanks 😄
i installed a 10.6" screen in mine built into the console. I want to upgrade to a larger screen. I was big into car computing
@AndyFromm
2 жыл бұрын
Nice, any pictures or videos?
Radio actually fits in the double din conversion kit just fine ..no mods needed 👍🏽like a glove ...literally
Thank you!
Do you have to move the heater controls or is that just a thing most people do?
@AndyFromm
2 жыл бұрын
I think it would be fine not moving them but it might be difficult to get at them with the screen in the way.
@austintyndall1246
2 жыл бұрын
@@AndyFromm well I have a 97 and I was just looking around for Different setups and all. This one caught my eye. I might look into it more
@AndyFromm
2 жыл бұрын
@@austintyndall1246 thanks for checking it out and good luck to whatever you end up doing 👍
Where was that second black wiring harness??
@AndyFromm
3 ай бұрын
Mine was just down on the right
@gekkoman4853
3 ай бұрын
@@AndyFromm ahh, well I can’t find it. I pulled the amplifier out. Is there any way you can show or is the car no longer there?
@AndyFromm
3 ай бұрын
@@gekkoman4853 i don't know if it's a different year thing? I don't even know where the amp is on these. my plug was right there, I wouldn't be able to show it any better.
@AndyFromm
3 ай бұрын
@@gekkoman4853 i did some googling, if the amp is where it showed me, there can't be that much wiring to follow back.
@gekkoman4853
3 ай бұрын
@@AndyFromm yeaaa, the connector is different than the one that was provided. I’m convinced I have the wrong part now lol
What’s the park called that’s holding the radio and where can I find it ?
@AndyFromm
Жыл бұрын
Simgle din radio cage, i think they are pretty much the same but i came up with xtrons FRA002. There is some on ebay. 👍
@tulariusbridges7682
Жыл бұрын
Ok thanks
@AndyFromm
Жыл бұрын
I ment to say, I think the xtrons cage is about the same as other regular aftermarket radio cages.
how is the radio lasting n doing
@AndyFromm
Жыл бұрын
Still working great, don't get much time to drive the car though
Do you have a link for the screen?
@AndyFromm
7 ай бұрын
No, I don't think they sell it any more.
Whats the wire harness you used in the video ?
@AndyFromm
2 жыл бұрын
I think it was similar to this one, I couldn't find where I bought it from to be sure. amzn.to/3ivQLWZ
@cliffjumper5621
2 жыл бұрын
@@AndyFromm thank you 👍
@AndyFromm
2 жыл бұрын
@@cliffjumper5621 no problem 👍
Andy, where to buy and is the screen "touchscreen"?
@mayracingandfabricationco.20
3 жыл бұрын
LoL. You answered my question at the end of the video other than where to purchase.
@AndyFromm
3 жыл бұрын
@@mayracingandfabricationco.20 I believe I bought this off ebay but it may not be manufactured anymore because it is a few years old now. For what its worth, they have a website. xtrons.com/ Thanks
Which head unit did you use
@Weber1987
2 жыл бұрын
Is it a double din unit or single din?
@AndyFromm
2 жыл бұрын
@@Weber1987 xtrons, this was a single din.
Your "paws"...they're just TOO big for this kind of job!😁
@AndyFromm
4 жыл бұрын
Lol, they get pretty scratched up
Radio 1din?
@AndyFromm
3 жыл бұрын
Yup
Looks kinda stupid with it not being flush
@AndyFromm
2 жыл бұрын
I know but it's too big for that without cutting it all up. I had it from a different vehicle.
Is it work with 2003 ?
@AndyFromm
3 жыл бұрын
The trim piece is a little different on a 2003 but could be made to work or install the trim from a 1998.