One of the few reviews to show takedown and reassembly, thanks!

@highcaliberhaymaker

Жыл бұрын

Absolutely, I do breakdowns with all gun reviews 👍🏻

@brendayarborough1271

2 ай бұрын

Agree!! We bought the M&P FPC for a surprise birthday gift to our grandson. I have viewed so many videos and this is the ONLY video I have seen that thoroughly explains takedown and reassembly. We are in Comifornia, so have the ridiculous fin attached to the grip - pray with us that the assault weapon ban is abolished soon so we can take that off.

Everyone hates on the mag release setup but I 10/10 love how they set it up. Love my FPC

@SuperEddie0228

27 күн бұрын

Yes, I agree. Everyone always complains about the magazine release as if it's something that requires a degree.. They almost sound like crybabies, but it's the simplest thing. It is simply the push of a button, but people complain because you have to push the left to take out the right. And i'm like jesus christ, why is that so complicated. I'm glad these kids didn't grew up in the 70s. And eighties, when we actually had to get up from our butts to change the tv channels😅😅😅

“Reliable, fun, and accurate.” Your review is why I am sold. Checked it out at my local gun range/store and will pick mine up next week. Other online reviewers complain and harp on the fact that the “storage” for the mags are a big negative and not quick & easy to retrieve the mags…but I guess they expect this for serious everyday “combat” and not storage.

@highcaliberhaymaker

10 ай бұрын

Glad to hear it man. Thank you for your support!

@johnm2366

8 ай бұрын

What do they want, egg in their beer?

@sharkbait000

8 ай бұрын

@@johnm2366I’ve realized everyone wishes they were in every development & design meeting. Can’t please everybody…I’ve actually picked up the S&W Response instead a few weeks ago and really enjoy it.

This shoots really tight groups was very impressive and he a I own one

Love love love new options in the 9mm folding rifle segment

Nice review, thanks- may pick up one soon!

Got mine a couple months ago and had to send it back to S&W for light to no primer strikes. But after getting it back (bolt was replaced.) ,it's run flawlessly. It's now my new PDW.

@highcaliberhaymaker

Жыл бұрын

That is unfortunate to send it back but I'm glad to hear you are now experiencing what I am with it. 2A all day my man, enjoy!

Got mine a week ago, first range time this week. Thoroughly impressed,accurate and fun to shoot. I’m in love.

@highcaliberhaymaker

4 ай бұрын

Glad to hear it!

Fabulous little gun.

Thanks for the review

Very cool. Great video

You covered everything! Thanks

Great review.

Excellent Thanks Clear and concise.

@highcaliberhaymaker

10 ай бұрын

Glad you enjoyed it

Most awesome and fun gun 🙂

Best breakdown yet, thank you.

@highcaliberhaymaker

9 ай бұрын

No problem, thanks for watching

The straps inside the bag don’t go in a specific place. You could move them around anywhere you see fit.

I can’t seem to find a video on how to get the feed ram out for polishing. I’m sure I could figure it out. I just wanna see someone do it first, but nobody does it. Everyone just does a regular field disassembly.

Well done video. Other videos that I watched showed the bolt going back in rather easily. Like you, I had to use the back end of a screwdriver. I'm glad to see that it's not just my FPC that has this issue.

@highcaliberhaymaker

Жыл бұрын

Thank you for your support, happy to it

@charlieragland8295

7 ай бұрын

Mine was the same, getting it out needed a little negotiation. After 500 rounds it comes out easier but still likes a nudge back into battery.

Dude, the magazine releases go both directions. It’s ambidextrous. whether you’re left-handed or right handed you could push down or pull up on the same side. This way, no matter which way you grab it, you can reach either side. Genius.

@highcaliberhaymaker

Жыл бұрын

Yes but still not ideal for fast reloading

I find putting my little finger under and lifting up gets the 23 round magazine off the same side.

you can avoid tapping it with a hammer to put the bolt back in place. What's retain the bolt to seat fully foward is the top of the hammer that is in the way and stop the bolt. I found the best way is to put your pinky finger into the ejection port, push down on your hammer a bit while pusing on your bolt from the rear and the bolt will seat with absolutly no force. Just need a bit of torque into your pinky!

@vincentc2160

Жыл бұрын

let me know if that work for you!

@MeMe-ze8dz

8 ай бұрын

I just use a punch to press it down.

@mnrodriguez

6 ай бұрын

That worked for me perfectly! Thanks!

What is the position of the trigger during disassembling? Thanks!

@highcaliberhaymaker

Жыл бұрын

Should be in the cocked position

I'm between this and the Ruger PCC - nice thing about this is it's a bit cheaper and comes with the picatinny rails all the way across the top. Also cleaning on this looks WAY easier than the ruger. Both excellent guns, but I'm leaning towards this. My only question is how does the folding out clip/mechanism feel? Do you feel like after a few years it'll wear out and it'll just slide open? Or is it pretty durable?

@highcaliberhaymaker

10 ай бұрын

That is my thought as well, but this thing is so well made I don't see it being an issue. The only thing I think that will need replacing is the charging handle since it's plastic/polymer and a little notch clicks into the mlok slot to keep it folded open. Cheap part to replace though.

@middleagedbaldguy6774

10 ай бұрын

I have a pc9. Its trash. Im picking one of these up today from my local Cabellas.

@highcaliberhaymaker

10 ай бұрын

Glad to hear it. Check out the link for PSA, might get a better deal

Looks an awful lot like Ontario… where are you guys?

@highcaliberhaymaker

Жыл бұрын

South Carolina

At the end of the dissasembly for field stripping, I reached for my FPC and accidentally dry fired the gun. Now, after assembly when I pull the charging handle the gun won't reset and the trigger wont fire. Is this something I can remedy myself? Thank you!!

@highcaliberhaymaker

Жыл бұрын

Yes you need to disassemble again and reset the trigger

@redveiner

9 ай бұрын

I saw on a different site a guy did the same thing and ended up sending it back to SW to be fixed. He stated he read in the directions this is a big no-no (pulling the trigger while disassembled) and can cause damage.

@JeffN-A

8 ай бұрын

You can reset the trigger with your little finger, or a non-metal object like a magic marker, or a dowel. I did this to mine on purpose to see how difficult it was to reset. No big deal. Sending it in SW is going waaay overboard.

Hey on the video it looks like its being shot left handed 1:45 minutes into the video, Is it?

@highcaliberhaymaker

10 ай бұрын

It isn't just the way the camera flips when on self screen.

What kind of scope yr using ? 18:24

@highcaliberhaymaker

6 ай бұрын

Sig Saur Romeo MSR

Should have got a KelTec

@highcaliberhaymaker

10 ай бұрын

No way

@donschlonski2936

8 ай бұрын

And yet here you are on an SW video

@PepeDeezNutz

7 ай бұрын

@@donschlonski2936 KZread was on auto play. I search terrible videos and yours came up

@PepeDeezNutz

7 ай бұрын

@@donschlonski2936 yup here I am

@takenusername

4 ай бұрын

I appreciate the narrow thinness of the Sub2000, even the gen 3 which wasn’t out at the time of your comment. The on board magazine storage was one of the reasons I got one of these over the Sub2000. I have a gen 1 Sub 2000, and I was very close to getting the gen 3. While it’s more concealable, this is the better “rifle”.

Rifle accuracy testing should be done at a further distance that 40 yards. I would've tested at atleast 75 yards. I know it's not an AR 15 but shooting a 9mm round at 75 yards with accuracy is possible. Good video. Thanks for the review and breakdown.

@highcaliberhaymaker

9 ай бұрын

Noted. I have since moved ranges as it did not allow that distance. Now I have over 500+ yards 😁

@MeMe-ze8dz

8 ай бұрын

On mine, at 45 feet it cuts a single hole with a Holosun 510C. At 100 yards it hits the 8 inch gong so...

I want one !