Now I'm using 14t drive sprocket for city rides and it's awesome coz it's very quick in acceleration

@keisuketakahashi4463

3 жыл бұрын

How's the mileage and efficiency?? How much does that 14 teeth sprocket cost?

@bismibismija2841

3 жыл бұрын

@@keisuketakahashi4463 bro what is the rate did you buy it 14teeth can i buy only 14 teeth??

Bhai mere pass Yamaha R15 V2 HEI MENE SECOND GAADI LIYA THA OR AB MUJE PAHALE BAR throttle KARNEKKA POWER AB NAHI MIL RAHA BHAI IS PROBLEM KILIYE KUCH BATAO

With 16t drive sprocket bike was doing 140 kmph max speed in 5th gear for 6th gear the torque was not adequate did 147kmph though with revs leftover

So what should i do if I want to increase the top speed on my R15 V1 (2009).Should i go for an even smaller sprocket ?

@AdityaJadhav

11 ай бұрын

Full system free flow, and then a smaller sprocket, but reduce only by 1 tooth on the rear sprocket

Nice video....

I want to increase torque and pickup of my fzs v2 so I want to change bigger sprocket in my bike so which bike chain sprocket is suitable for fzsv2. Plz suggest me

@AdityaJadhav

3 жыл бұрын

You need to see which #sprocket matches the hub of your #FZS. I am sorry, I have never worked on #yamahaFZ, I have not seen it.

Bro is Yamaha sprocket of 15t:45t available in the market?

@AdityaJadhav

2 жыл бұрын

No idea man! haven't seen any such thing so far

why would you do that? R15 already feels dead below 7.5k rpm.

@AdityaJadhav

4 жыл бұрын

Well, we learnt it the hard way. it was a very bad idea for the long run.

Hi can you please tell me how did you manage with existing chain as the stock chain doesn't have lock link. You have either break the lock or buy alternate chain. In the video u said u used links of old chain. Please help me on this

@AdityaJadhav

6 жыл бұрын

we broke a link from the version two chain and added it in to the version one chain.

@AhmedAli-jl6jy

6 жыл бұрын

Aditya Jadhav does V1 chain comes with lock? I mean is there provision to open chain lock link, as every other normal bike has

@AhmedAli-jl6jy

6 жыл бұрын

Aditya Jadhav when it comes to V2 chain it is permanently fastened with rivets. We cannot add or remove links in V2

@AdityaJadhav

6 жыл бұрын

we did it man! our mechanic did open and add licks to the chain.

@AhmedAli-jl6jy

6 жыл бұрын

Aditya Jadhav ok

chota chainsprocket lgane se topend or pickup m kya change h bada h kya kam hua h ?

@AdityaJadhav

Жыл бұрын

Kya?

@sahilmalhotra5550

Жыл бұрын

@@AdityaJadhav mera mtlb jo apne chainsprocket lgya h wo stock se bada h ya chota ?

@AdityaJadhav

Жыл бұрын

@@sahilmalhotra5550 chota hai stock size se

Version one key chain sprocket version 2 mein lagana sahi hai ya galat batao bhaiya

@AdityaJadhav

5 жыл бұрын

mat dalna, kuch khaas acha nahi hai

@sikandarali2472

4 жыл бұрын

Aapki achi bat lagi .aap sach bol te ho thens bhai

Ok just tell me Was there any speedo error? Because there might be

@AdityaJadhav

2 жыл бұрын

I didn't check.

Is to good to change v2 stock chain sprocket to v3's ?

@AdityaJadhav

5 жыл бұрын

I have not tried it, but it should be. I cannot confirm anything now.

What is the top speed

R15 v2 ki chain sprocket r15s me laga sakte hai kya.?

@AdityaJadhav

4 жыл бұрын

laga sakte hai

my combi is 15/49, it accelerates quickly and give more torque on uphill, downside is my topspeed is only 115-120kph. im planning to change my sprocket. Is the combination 14/48 ok? anyone tried that combination? how's the torque and topspeed?

@AdityaJadhav

2 жыл бұрын

I don't know, never tried. Why don't you try and let me know if it works or not!

@hrioshifanai8624

2 жыл бұрын

where did you find 49 teeth for r15 v2 @HP Sunday reply please

@hpsunday

2 жыл бұрын

@@hrioshifanai8624 it’s everywhere in my country

@hrioshifanai8624

2 жыл бұрын

which country can you tell me any compatible sprocket for r15 v2

@hpsunday

2 жыл бұрын

@@hrioshifanai8624 Philippines

You should've put 14teeth engine sprocket, which makes the final drive ratio 3.0 instead of 2.8 with 15teeth. You'd have more torque with 14teeth.

@AdityaJadhav

6 жыл бұрын

yup, calculated that. but lets see how this setup performs first.

Do a top speed in all gear video after putting the smaller sprocket please.

@AdityaJadhav

4 жыл бұрын

sorry man. already changed the sprocket. because it wasn't successful.

@nielrodriguez9977

3 жыл бұрын

@@AdityaJadhav no need to do risk for that video dud.

@AdityaJadhav

3 жыл бұрын

@@nielrodriguez9977 YES MAN! that's why I haven't yet made the video! LOL

Even I had tried to have this set up. I had just got front 14t and rear 42t sprocket of V1 without new chain. Regretted later after knowing old chain was quite loose. I also had 16t front sprocket so decided for fitting 16t at front without changing rear sprocket.

Hi Adithya, I am riding a v2. I want to retro fit r15 v1 front and rear sprockets in v2. Will it increase my mileage? If yes How much. Please advise

@AdityaJadhav

2 жыл бұрын

I think the V1 has a smaller sprocket. it will not improve your mileage. Please put larger spocket for mileage.

@Saravananmanivel135

2 жыл бұрын

@@AdityaJadhav Thanks for the advise Adithya. Can we fit v1 smaller tyres in v2, to reduce the rolling resistance and increase mileage. I won’t mind the tyre aesthetics.

@AdityaJadhav

2 жыл бұрын

@@Saravananmanivel135 I don't think so. the wheel hub may be different. The width specially must be different.

Hlo bro choti Vali garari m speed ko koi frk padta hai kya

@AdityaJadhav

5 жыл бұрын

padega

@sonymehra49

5 жыл бұрын

Speed zyada hoigi ya fir kam

@AdityaJadhav

5 жыл бұрын

bada daal dena, pick-up badhega apke gaadi ka

Sir how much chain links in yamaha r15 v.1

@AdityaJadhav

4 жыл бұрын

I'm sorry man,I did not count. but we had to use the chain of #Yamaha #R15 V2.

@manbirchaudhary6921

4 жыл бұрын

@@AdityaJadhav okay thanks for answering

@AdityaJadhav

4 жыл бұрын

@@manbirchaudhary6921 always welcome.

Chain v2 ka hai ya chain b change kia ?

@AdityaJadhav

4 жыл бұрын

Chain V2 ka use kiya tha par linkages kam kar diyenge.

@253442271

3 жыл бұрын

How many linkages

I am changed small sprocket. Pickup low top speed increased 1st gear 53 plus speed up

R15 v3 between r15 v2 chain set me kiya different hai.. Dono chain set me kiya fakar hota hai,, Maine abhi chain set liya too mere ko rs 2800 ki chain set diya agency walo ne

@AdityaJadhav

5 жыл бұрын

video me dekh lo, bata diya hai farak maine ! par agency wale double rate me dete hai sab kuch, maine bahar se kahreeda, normal dukan wale se.

@rajathari3536

4 жыл бұрын

agar old stock did ki chain hogi to price 2800 hi hoga for r15 v2

First of all I would like to appreciate your effort..keep the good work going bro Secondly, kindly help me with some thoughts.. I own a R15 v2 2016 with stock rear sprocket of 47 Teeth but I'm going to upgrade it to 50 Teeth rear, so kindly tell me will the stock chain fits my condition or do I need to change the chain with more linkage??.. please help me

@AdityaJadhav

3 жыл бұрын

Appreciate your positivity.. 50T #sprocket size is difficult to find but I am assuming the #HeroImpulse has a large sprocket and if so you need to see if the PCD or the hub matches to your #motorcycle. If so, go ahead with it and let me know how was the change. P.S - Linakges is something you can determine when you have the sprocket set fitted on the hubs, so best is if you take your call then.

@half_wolf-half_wrecking_bu1300

3 жыл бұрын

Sprocket of 50T that'll fit for my bike I can get it but I'm concern about the chain.. more over I'm looking for brass/golden colour chain..

@AdityaJadhav

3 жыл бұрын

@@half_wolf-half_wrecking_bu1300 That is difficult to find. Especially for that size. You have to get a long brass chain from a bigger #motorcycle and then break it short.

@half_wolf-half_wrecking_bu1300

3 жыл бұрын

You must be knowing more about it so if u please kindly help me with the site and the correct chain and colour that will suit my r15 v2 with upgraded teeth..please

@AdityaJadhav

3 жыл бұрын

@@half_wolf-half_wrecking_bu1300 can't help here. you need to look for yourself what you wanna find. research a little.

Will r15v3 chain sprocket fit in r15v2 hurry

@AdityaJadhav

4 жыл бұрын

It should fit ideally because the PCD should be the same. Gotta check though

14/42 taller,15/42 tallest,15/47 best,14/47 shortest but best for drags cheers 😉

@AdityaJadhav

6 жыл бұрын

Yes Sir! but we learn't it the hard way !

@maxrider2887

5 жыл бұрын

14/47 is best

@parmjeetsingh3994

5 жыл бұрын

Top speed which one?

@sanudas500

4 жыл бұрын

Which one increase the short pickup/ acceletation

Will this fit fz v2

@AdityaJadhav

3 жыл бұрын

ideally, it should fit in the #Yamaha #FZ v2

@ronnie.b6376

3 жыл бұрын

@@AdityaJadhav thank u brother

@AdityaJadhav

3 жыл бұрын

@@ronnie.b6376 Welcome

Bro which is set for r15 size and which bike chain bracket bro pls

@AdityaJadhav

5 жыл бұрын

which version?

@twinadventure8395

5 жыл бұрын

@@AdityaJadhav R15s

@twinadventure8395

5 жыл бұрын

@@AdityaJadhav R15s bro

@AdityaJadhav

5 жыл бұрын

@@twinadventure8395 same as the R15 version 1

@twinadventure8395

5 жыл бұрын

Thq bro

Bro please recommed me smaller sprockets for fz V2.0

@ashokkumar_achary

3 жыл бұрын

15t 41t

If we put smal sprocket means what's the difference will get buddy

@AdityaJadhav

4 жыл бұрын

acceleration will be weaker but the top speed improves.

@Nandhakumar-wl5wc

4 жыл бұрын

@@AdityaJadhav what abt pick up

@AdityaJadhav

4 жыл бұрын

@@Nandhakumar-wl5wc pick up thoda kam hoga. but top speed improve hoga. but depend karta hai kaunsi size ka daloge aur kaunsi gaadi me

@jarunaraj

2 жыл бұрын

@@AdityaJadhav whats the top end u achieved after the mod

@AdityaJadhav

2 жыл бұрын

@@jarunaraj not much, barely 135-140..

Bhai speed kitni increase hui

@AdityaJadhav

5 жыл бұрын

zyada nahi hui, fail hogay experiment.

@satyamlahre1130

2 жыл бұрын

Bhai normal' use ke liye 47 wali teeth me 42 ko fit kar sakte hay kya

now try to fit v3 sprocket setup it will help many people for sure 😊

@AdityaJadhav

5 жыл бұрын

Sure sir, if only we could source it!

@buntafujiwara5644

4 жыл бұрын

And extra 6 cc rebore.. With 165cc injectors.

@nielrodriguez9977

3 жыл бұрын

@@buntafujiwara5644 u can't add extra cc ur gonna have to buy a new block and piston. with is called mm.

Bro is there any difference in milage .... Reply me plz big fan ❤️❤️

@AdityaJadhav

3 жыл бұрын

not much. but it should ideally decrease the mileage.

Anyone tried 13/42?

@AdityaJadhav

5 жыл бұрын

No, not tried.

Where is the top speed check video bro?

@AdityaJadhav

6 ай бұрын

Sold the bike! Sorry

@Zboygenz

6 ай бұрын

@@AdityaJadhav did you remember top speed difference bro i need to know the difference between 🥲

@AdityaJadhav

6 ай бұрын

@@Zboygenz it was noticable.

Ninguno probó 14t 40t ?

@AdityaJadhav

5 жыл бұрын

please translate to english

Top speed badi kya Bhai

@AdityaJadhav

5 жыл бұрын

jitni badhni chayey utni nahi badhi, fail hogaya yeh experiment.

Top end Kya aaya

@AdityaJadhav

4 жыл бұрын

Not much, 135kmph. yeh sprocket size sahi nahi tha is #enginetune ke liye.

Best top end konsa sprocket

@AdityaJadhav

5 жыл бұрын

best top-end toh stock sprocket me hi ayega

@parmjeetsingh3994

5 жыл бұрын

@@AdityaJadhav which size

@AdityaJadhav

5 жыл бұрын

@@parmjeetsingh3994 Which bike?

@parmjeetsingh3994

5 жыл бұрын

R15 v2

@AdityaJadhav

5 жыл бұрын

@@parmjeetsingh3994 it's in the video, use the stock size.

0-100 in just 60secs

@candy76066

2 жыл бұрын

🤣😂

Engine ku damage hota hai kya bhaai ???

@AdityaJadhav

4 жыл бұрын

Nahi, #Engine ko damage nahi hota.

bro.. after installing this.. your what about your v2's performance... plz reply me

@AdityaJadhav

5 жыл бұрын

Bad Idea, don't do this. Top speed was only up to 135km/hr (On the odometer). Instead keep the rear #sprocket same and reduce the size of the front by one #teeth. That works better now.

@ranjith8717

5 жыл бұрын

Aditya Jadhav .. bro how to reduce one teeth in inner???

@ranjith8717

5 жыл бұрын

Aditya Jadhav.. and after doing like this.. whats the top speed bro??

@AdityaJadhav

5 жыл бұрын

@@ranjith8717 V1's inner sprocket is small by one teeth, check if you can find it. And keep the outer sprocket of V2.

@ranjith8717

5 жыл бұрын

Aditya Jadhav .. ok bro by using v1 inner with v2 outer sprocket... whats the performance and top speed bro???

How much u increase top speed

@AdityaJadhav

6 жыл бұрын

not much.

@AdityaJadhav

6 жыл бұрын

I don't recommend you do it.

@muzammilattar6050

6 жыл бұрын

But I want to know how much u increase

@AdityaJadhav

6 жыл бұрын

Not more than 145km/hr. Mat try karna, #Fail attempt hai.

@muzammilattar6050

6 жыл бұрын

Bro use 14/42 it's give you parfomance and top end I think your top 140+

Hindi mein bol bhole

bal ta hind te bol...