I really like it when David and Steve geek out about engines, there's so much information that they've just absorbed over the years

@joshuamohammed4093

2 жыл бұрын

Sorry to be so off topic but does someone know of a trick to get back into an instagram account?? I was stupid lost the login password. I appreciate any tricks you can offer me!

@dominikpayton5777

2 жыл бұрын

@Joshua Mohammed Instablaster ;)

@joshuamohammed4093

2 жыл бұрын

@Dominik Payton Thanks so much for your reply. I got to the site through google and im trying it out atm. Seems to take quite some time so I will get back to you later with my results.

@joshuamohammed4093

2 жыл бұрын

@Dominik Payton It worked and I now got access to my account again. Im so happy:D Thank you so much, you really help me out!

@dominikpayton5777

2 жыл бұрын

@Joshua Mohammed no problem :)

Freiburger in a boat: "It's got the sand." "The what?" "The Saaaaaaand."

Ahhhh, Mopar engine talk. *sips coffee

@autopartsnw4857

3 жыл бұрын

Literally how I'm starting my day... 👍

Perfect video. The 340 LA engine is one of the best. Mopars with this small bock has great performance and especially excellent handling.

Please do a cheap 318 power build

@ghomerhust

7 жыл бұрын

agreed. theres a ton of 318s out there, i bet folks would love to see how to squeak an extra hundred horses out of it on the cheap

@SophiaAphrodite

7 жыл бұрын

I kept the original 318 in my 1974 Satellite I restored about 15 years ago. It only had 67k on it and did not want a race car. Just something with pep. I had the heads rebuilt and ran the rest with after market and rebuilt it myself. Cam, intake, carb, headers, stall converter, shift kit. My only high priced parts were new Edelbrock carb and a custom DUI ignition. I doubled the HP from 150 to close to 300 I left the original 3.11 gears ( I think) I was getting 18mpg and because of the high gears my power band was over 40 mph.

@JAYMAN595367

7 жыл бұрын

George Ward I do agree with this as well, I personally have an 85 Dodge D150 pickup with a 318 that's mostly stock but the engine has had a fresh rebuild over 19k ago. I don't wanna go out to the strip but I want it to have some power to it and really get down the road, plus I'm a teenager that loves to push the throttle on old square bodies lol nothing like a street truck man

@johnwilburn

6 жыл бұрын

Use 308 heads from an 87-91 or Magnum heads with AMC lifters. If not doing an inexpensive stroker, use a 273 Crank. It's lighter and fits. There are a few lesser known, low budget, old school ways of getting more power from the 318.

@ClearTheDeck

5 жыл бұрын

If you google "The Mopar Muscle Truck Blew Up - Roadkill Extra", starting at around 2.25 they describe a pretty nice 318 power build. Not necessarily "cheap" but you could improvise.

While I consider myself a car guy, I don't know a ton of mechanical specs. This is almost as hard to follow as a lawyer talking to an accountant lol

@65sgboogieman8

5 жыл бұрын

Steve Oswald it gets easier to understand with time

"It has the sand"

@Crouse_Property_Maintenance

7 жыл бұрын

The what? The sand. It's the new thing.

I love this stuff..Takes me back to all the discussions we used to have in the garage while wrenchin on these old Mopars.

roadkill "extra" should be sponsored by coronas.

@ddd228

7 жыл бұрын

They won't do it. Good idea! Let Mike drink Coronas.

@alexcorona

7 жыл бұрын

Isaiah M I offered David some Corona merch before, never heard back.

@NarwahlGaming

7 жыл бұрын

They're not allowed to have alcohol on the show anymore, since Dave bit the dust in the shop that one time. Legal said 'No'.

@richardmiller3781

5 жыл бұрын

Corona and flip flops. Lol

Every episode is great. Thanks motor trend for keeping this alive.

Great stuff as always, guys! I love it when you guys dig into the history of different engines and teach us what is what! I've always been a big block Mopar guy, my first car was an E body, a 1974 Dodge Challenger, it had a 440. I sold it (like an idiot) and bought a 1968 Dodge Dart, it got the 440 out of the Challenger. I completely agree with you guys, a small block is acceptable in an A body or E body but not in the B body! Any ways, thanks for all the great info and another great video!

I was suprised to hear them bash on the magnum motor.... : ( the built magnum motor in my jeep zj runs 12 .6 all day long in 4wheel drive. I love it.

@oscarwalton1188

4 жыл бұрын

There just old and hate change

@frigglebiscuit7484

4 жыл бұрын

yea, sorry but the magnums is so much better than the LA, especially the 80s smog engines.

@brad11344

3 жыл бұрын

Lot of engine for small frame

@brad11344

3 жыл бұрын

Love to see a video of the jeep

These vids are cool...feel like it's three of us standing around a project, trading stories. I daily drive a 5.9 Grand Cherokee so it's like I get a daily dose of LA Chrysler nostalgia...

@TheDavidFreiburger

7 жыл бұрын

The 5.9 was a great Jeep!

@CCCommander

7 жыл бұрын

It's a blast, I love it. I spent 6 months searching for the right one and I put a lot of work into making it my own--both mechanically and cosmetically. It's my first Mopar and I've developed a whole new respect for LA blocks. I also have a 2002 4.0 TJ, which I bought new and have 319k on it...I've developed a similar respect for the old AMC sixes. Keep up all the good work, David--love the empire you guys have created!

@pkranz937

5 жыл бұрын

The 5.9 Jeep is a Magnum, not LA. Different engines.

When you say 'fixing it' you mean install motorhome 440 right?

@griffinsavoy

7 жыл бұрын

A No Dulcich (rightfully) wants to build a really mad 318

@lilman227

7 жыл бұрын

Dburger62 I hope so! I really want some ideas for my 318

@ANo-qc1qx

7 жыл бұрын

Dburger62 I know. Just having a little fun.

@nathanrip590

7 жыл бұрын

FUCK you need to make more videos on KZread unsubscribing because all I have is dirt every day

@BCaldwell

7 жыл бұрын

Nathan rip And All you get from ded is teasers! I'm not unsubscribing but it is extremely frustrating. I did however discontinue my mod because it really wasn't worth it. I pay over$60 a year for Motortrend magazine. They should toss this shit in for free for that In my opinion.

Would you guys do a Roadkill Extra episode on the 318 A poly engine?

@ranchurdhimster4955

3 жыл бұрын

For money

I really like listening to these guys. A boatload of knowledge and knowhow when it comes to allthings Mopar in general and small blocks in particular. No multimillion dollar studios packed with state of the art equipment, just hand tools, beers, and the cars. Great stuff indeed!👍 👍

I have a 71 satellite with a 318, gotta love Dulcich standing up for the little people.

@kcav5374

4 жыл бұрын

Uncle Tony's garage (on you tube) has a 72 coronet (I believe) warmed over stock cast piston 318, some minor port work and an overdrive truck 4 speed with 4.10 gears that they plan to spray...Made a couple shots today on the street and it sounded really good!

@JoeCnNd

4 жыл бұрын

Oh trust me I been through his channel a time or 2. Love what he's done to his 318.

I love these cuz it’s like when my friends and I are just chilling out and just talking about cars and engines and what we wanna do to what we own and stuff like that

You guys have a very informative channel here keep up the great work

every Mopar guy should dream about having a 340 Dart. my first car when I was 16 with a 74 Scamp slant 6. that should get a chuckle from anybody but I loved that car and it didn't take long before I changed it over to a 318. when I switched the K member it came out of a 340 Dart GT but the car was trashed. big block darts only belong on the drag strip anybody who wants an awesome car needs a small block A body

@frigglebiscuit7484

5 жыл бұрын

big block darts only belong on the strip? scared of a big block dart eating your 340 on the street?

@frigglebiscuit7484

5 жыл бұрын

@@hirkimerwilberfart2413 340vs big block, build both the same and in the same vehicle, big block will win every time. it's physics. sorry.

@frigglebiscuit7484

5 жыл бұрын

@@hirkimerwilberfart2413 boat anchor? LMFAO. nice 20-30k 340, with a 4000rpm converter, and 4.88 gears. now do the same to the big block. what dominates top fuel? BIG BLOCK MOPAR HEMI.

I would love to just be in the room while these guys talk cars. This is automotive passion right here.

You didn't say anything about the cast versus forged crankshafts and harmonic balancers.You have to be careful to not mix them when doing a build.

@herman452

7 жыл бұрын

Also torque convertors - neutral balance vs. weighted.

@deronborghi5929

4 жыл бұрын

Are you talking about the difference between internally and externally balanced crankshaft?

273s had the intake bolt angle and bolt size for 64-65 then it changed for 66. In 64 the 273 only came with a 2bbl carb making the 1965 cast iron 4bbl intake a one year only part. Took me forever to find one for my 1964 Dart. The heads are different in 64-65 too.

I owned the small block six pack and big block six pack cars. All of them were 1970s. The only issue with the 2300 series Holley carburetors was that they tended to dry out in the winter after several seasons, because we didn't drive those vehicles in the winter time. So the old gaskets would dry out and you needed to rebuild them which really is quite simple. Probably one of the main issues that plagued the vacuum secondary carburetors oh, was that they would get perforations in the rubber diaphragm, and then wouldn't open the end carburetors like they should. This led to a lot of us making Progressive linkage setups to do away with the vacuum operated end carburetors. I really liked the performance of the six pack set up on both the big Blocks & the small blocks. However when I went to the 440 + 6, a very serious change in torque and Power. For instance, I owned a 1970 Factory V code 440 + 6 GTX. The only work I did to this engine, was fully grooved rod and main bearings, which I purchased Michigan 77 bearings, melling high-volume oil pump, 484 lift hydraulic cam with sealed power anti pump up lifters, and tuned equal length headers and collectors length that matched my build. 3.73 gears and a 4-speed trans and this car with 10.5 compression ran 11.78 in the quarter mile. So if you plug the figures in for the weight of this particular type of car, and the minor changes I made to the engine, the horsepower figure had to be fairly decent. I can tell you this for sure, there are faster cars around today sure, but back in the day there was nothing much different between the 426 Hemi and the 440 + 6. The torque out of the big block six pack car is amazing

92 was the first year. i had a dakota with the 318. that truck flew i loved it.

The early 318, that was used from 1956 to 1966, was also known as the "poly head" 318. For 1967, a "LA" version of the 318 was introduced.

@Roadrunner172

5 жыл бұрын

That is correct. The "poly head" 318 was also sometimes known as the "wide block" 318.

@118arch

5 жыл бұрын

It was made from 56 to 66 in the US and until 67 in Canada and the LA block bottom end is pretty much interchangeable even camshaft just needs some slight milling heads are different

@65sgboogieman8

5 жыл бұрын

Those old poly’s also get referred to as a “semi-hemi” sometimes

Great information thanks

glad you finally made a video on 318ci. I have the magnum and if been having nothing but trouble

@SimplexSM

5 жыл бұрын

Odd. Usually those motors would be reliable, but the rest of the vehicle it's in falls appart.

Great info!

i can listen to these guys talk cars all day

I actually like roadkill extra and roadkill garage, I'm just to lazy to get the subscription 😂

@jeffparris8387

7 жыл бұрын

For me it's not lazy. The guys just need to realize, no one pays for content anymore. And so often, Roadkill actually sucks.

@RegulerShowTV

6 жыл бұрын

Jeff Parris it’s only 5$ a month and it’s really easy to access on their app, I could just torrent all this stuff but it’s too much work

So much knowledge.

Ok, I just love you guys. Lol. You have my dream job. I wish I knew as much as you both do.

first vehicle out of high school was a 92 Dakota, with an efi 318 (just pre magnum) I loved that truck

So much knowledge

These videos might actually be worth going over the website! (Just kidding) great video though

This is cool stuff for a Brit! Good motor info in condensed form!

I’m happy to see mainstream give Mopar attention!!!!

I loved my 340. Great engine.

I did the 273 iron rocker arm thing back in the 80s. I had a solid cam in a 318 with 340 heads

Interesting. Thanks

The three factors that made the Mopar small block cool (not in order) is, the ability to find a good big block for cheap, the availability of good cylinder heads that don't need offset rocker arms (ie, the W heads, if you couldn't afford those, you had to seek out early 360 heads with the 340 ports or the late 1980's cop car 318 heads) and stroker kits. Now you can affordably take a 318 to 350 cid with a 360 crank cut by speed o motive or 392 cid, and have a head that won't choke it. Or you can take your 360 to 400+ cid, and have a power to weight ratio that makes a 440 not worth it unless you stroke that thing out another 30 cubes or more.

Damn dulchic back at it with the mopars again

the LA/Magnum engine was used until 2002. The "Power Tech 4.7" replaced it in 2003. Along with the almight hemi...or so it wants to be. The 318 hit the frames in 1967. 273 did run til 69. Listen to Mopar Man Dulcich

@pkranz937

5 жыл бұрын

The LA 318 lasted through 1991, the Magnum through 2002. The LA 360 made it through 1992, and was last used in 2003. The 4.7 replaced the 318/360 only in the Dakota/Durango, and the Grand Cherokee. It replaced the 318 in pickups after 2002, and the 360 in pickups after 2003. The 3.6 V6 replaced the 4.7 in all vehicles noted beginning in 2011.

They didn't mention it,...but yes, someone does make a three two barrel throttle body ( with intake manifold, and linkage) for the 5.2 and 5.9 magnum small blocks. Now you can build a modern version of the 340 six-pack!

Love me some Dave and Steve.

I am with you on the B body needing a big block. I am in the process of putting a low mile 85 318 in my 66 Plymouth Belvedere daily driver which currently has the Polysphere 318. Looks so sad in the engine bay

nice vid

Pulled the 11.7 :1 360 from my Duster yesterday. Gonna dump the compression so I can drive it on pump gas. What fun cause it will need a new cam so a new tune. Gonna repaint it to. Next summer will be better than this lousy summer was no matter what the insane world does. A 73 Duster will live on with it's 4th tune and 4th paint job since I bought it. And I'm a Ford guy. Love me some Mopar I do. Momma drove nothing but when I was a kid. She had a 67 Valiant, 69 Dart, 70 Dart (Panther pink), a 72 Charger, and then...a used one, a 70 440 mag RT Challenger convertible Plum purple. Mom liked Mopars.

@breckfoster767

2 жыл бұрын

That's why I love my LS lol. I have just a touch higher compression and I can drive around on 87 if I'm not super hard on it.

The odd pattern on the intake was 64-65 almost bolting strait down . In 1966 the 340 intake would bolt on a 273,I know I did it and ran 14.6 with a 500 cfm.2bll. street able.

The A had polyspherical combustion chambers and the valves were like a hemi or a BB chevy where the LA had wedge combustion chambers and the valves were side by side

You didn't mention they're also available in Dodge motorhomes.

@dannymyers5345

4 жыл бұрын

So was the poly headed 318

I was trying to think of something clever to say "how I wish you were pontiac guys" but the backdrop makes me think of my grandpa?

Talking about the 318, I had two '66 coronets both with a big block 318s.

why do some people think I'm going to hell for putting a 440 in a 96 Ram

@forestlawrencegrading9154

7 жыл бұрын

farmvideos .net it's going to happen some people might call it archaic others cobbled but I will call it in mine

@googlesucks5318

7 жыл бұрын

You are, for wasting a good 440. Just kidding. :)

@wyattlewis8671

7 жыл бұрын

And you'll still have 12 valves run circles around it.

@frigglebiscuit7484

7 жыл бұрын

12 valves made 400 ft lbs stock. yes, you can upgrade them, but put a turbo on the 440 too and see what happens....bye bye...plus you want be paying more than the trucks value when you have to repair the diesel.

@kroffustsnail

7 жыл бұрын

12 valves prefer going straight, they literally weigh over a half ton by themselves

My grandpa has a 72 duster with a 340. Sounds beautiful.

An old friend I've lost in time once told me that they could listen to me talk all day about certain topics. Now I finally know what they meant as I feel the same way about Freiburger regarding automotive. I've probably said this before but how the hell does he know so much intricate history of cars & shit?!

they came out in 1967... LA stands for Light A, the initial motor was released in 56 and was heavier..

@mattjohnson2988

4 жыл бұрын

So true

@JesseLancaster-qw2wq

3 ай бұрын

They did not come out in 67 the barracuda was released in 64 and had the 273 as an option The production of the (a) engine and (la) engine over lapped 64-67 But the la absolutely was around in 64 The engine released in 56 is the (a) engine which they built a 277, 301, 303, 313, 318 and 326 Really want to confuse the non mopar guys go to the parts house and order parts for a mopar 361

@gulfy09

24 күн бұрын

I think the a meant used in a bodies

hey dave my first car was a 1971 challenger 340 slapstick, 3.23 rear 5 spoke magnum wheels! bought it for 1000.00!

What he said about a late model Hemi in a 1970s Mopar goes the same for a LS engine in a 1960-70s Pontiac.

I have a 1992 Dodge power ram 250 4x4 with a 360 LA, It's an old "state" truck. It never fails when getting parts for the engine I end up with something for the magnum engine. This is my first Dodge, I've only had it 3 years, and have been trying to figure out the differences between the 360LA and the 360 magnum. This gave some good info. If anyone else could add to this, it would be greatly appreciated.

Talking about small blocks in B bodies, I recall working @ Andy Mannarino's Total Automotive in Detroit. We built a 390+ inch 340 for a customer, John Amo for his 64 Barracuda tube chassis car. With a four barrel carb (4500?) it made like 730 HP on our dyno! (But a switch to alcohol & old style fuel injection the number dropped to 700) Well, back up about 20+ years my buddy Al had bought the Silver Bullet' from Jimmy Addison! I was there the day he gave him $5000.00 for it complete. A 67 GTX that had been acid dipped with fiberglass trunk lid, doors and complete front end & with a tunnel rammed 496 " (Pro Sock?) Hemi it went 10.30's as a "street Car" I remember Addison telling us the engine made 735HP! So I always wondered what ET's could've been achieved with that small block in that car?! Keith

Thank you, I really enjoy your program. I would like to hear about the Plymouth Weslake small block. Would it be feasible in this time for reproduction?

Many years ago I had a 70 Duster with a 340 "6pack" engine. However, the guy I bought it from rebuilt the engine for use in a sprint car and later put it in the Duster for drag racing. The best ET he got was 11.37 and 137 mph in the quarter (he kept the slip). That car was a riot and dangerous! Two brothers I knew each had 440 GTXs and the 3 of us raced one day. I ate them for lunch! Unfortunately, a women ran a stop sign and I tee-boned her pushing the engine and drive train back. Sold it for parts and bought an Aspen station wagon to haul the wife and son around.

"Don't hit the Dart" dart 😂

Dulcich lookin like Roy Orbison in this one. But, hes a national treasure

Whoa, was that a dig at the General Mayhem's "upgrade"? Don't know about anyone else, but I loved it the way it was.

you guys should do a roadkill version of overhaulin.... and help me work on my 360 in my ramcharger lol. Its so hard to find mechanics like you guys who actually know what they are doing with old mopar.

Y'all got anymore of those free trials🚬🚬💉🚬🚬🚬🚬🚬

@canchume

7 жыл бұрын

just get new account cancel the suscription, then when they cancel it , you can start over with the same email lel

@cipryan96

7 жыл бұрын

hackerman

@NarwahlGaming

7 жыл бұрын

Holy shit! I better protect my gibson!

Yes, Plymouth trucks. I have the 2 wheel drive Plymouth Trailduster hardtop convertible.

these guys are mopar wizards that can fly

I need to go visit u guys to see them in person lol

Now I want to see Dulcich's 71 Satellite!! I bet that thing revs like a banshee!!

The reason the 273 was still around in 1968 and 1969, is because the 318 was not available with manual transmission. In 1967 there was supposed to be a new high performance 331 engine with a hydraulic camshaft and the same size valves as the 273. The performance was so disappointing that it was scratched. The 331 had a 4.00" bore and the 1968 340 increased this to 4.04", got Chevy size valves and intake ports. The 1967 and early 1968 318 engine blocks are heavy enough to be bored to 4.00" as the castings were originally meant for the 331.

we had a charger in Australia option with 340 ,E55 , same engine tag code used on TAA 340 e55 , ,

Mopar encyclopedia!! Like a sponge of Mopar small blocks

I believe the V6 transmissions will bolt to a 318 as that motor was an option on those early trucks starting in 1991. Not sure if it will work on early flat face 90' and earlier daks. This swap can be easily simple depending how far you go. Schumacher creative services makes all the engine mounts you'll need. Depending where your 318 cam from (car vs truck), you'll need a truck pan to clear the frame. You will also likely need to Upgrade the fuel pump with a regulator to get the right pressure. Now, it gets more complex here...all your guages and cm instrumentation was set for v6....I went carb and 1971 340, so I didn't need to worry about any of that stuff, but it certainly might throw codes on you. If you go carb, go MSD ready to run distributor, 3 wires and boom. While I'm thinking of it, go 360 rather than 318 if it's smiles per gallon your after. Also, don't use a 360 pan on that 318, it won't work. Anyways, there is lots more to consider, axle strong enough? Rear gears for performance and on and on. Best luck to you! Chris

the Magnum engines are great engines, extremely reliable if maintained

Can we just have a show of you to talking like this I could watch this for hours

Thanks for the free Roadkill Extra episode. Or would this be a Roadkill Garage Extra? Either way, thanks.

got a 2280 holly dual barrel carb...how to winterise it ...thkx!

Intake on 273 was the same for only 64-65 they switched in 66. I’m currently building a 273 cast date 64

@martinadams7949

3 жыл бұрын

i knew they where wrong when they said 68

I have a 1987 5.9 360 with edlbrock Magnum heads and 1.7 edl- rockers and a 572 edlbrock cam with double roller timing Chain with stock crank and Pistons double spring valve springs edl, and a edl performer intake and a edl 750cfm carb with 3 edl fuel pumps 57gph and bullit proofed 727a trans with Dana 44 rear with billit axle shafts #gotta love mopar

My brother prefers B and RB, I prefer LA. I probably have to many projects. Daily driver is a 99 1500 extendedcab, 360 4x4. Also have an '80 Powerwagon 150, 360, 4 spd, 4 bbl, 4" lift, and 35" mud tires. Have most of the parts to convert to 1 ton running gear. My old high school project truck. Was built in my dads garage as cheap as we could. 57 D100 with a 2spd push button automatic. Back in the early 80's we picked up a '69 Plymouth for parts. Used the torsion bar front clip, wiring, 8 3/4 diff. Later on we rebuilt a 340 to replace the worn out 318, rebuilt the 727, and added 2500 stall convertor. I've owned a handful of Ramchargers, '67 Dart GT, several pick ups with the LA. The 57 was going to be mounted on a 98 Dakota frame for modern suspension and drive train. My dad passed away in May, so I'm just going to strip her down, and go through everything since it's been parked for over 15 years. Shit I just realized I'm damn near writing a novel. My one and only big block car was a '69 Coronet R/T. That Holley double pumper would empty that fuel tank in a little over a 1/2 hour, in spirited city driving.

I built a 96 360 magnum for my 84 short wide dodge, it was pretty good

There's really only one reason for Detroit phasing out shaft rockers. Shaft rockers cost more and everything gets cheaped down.

Wow didn't know in Canada we had the A or poly 318 till 67 68 was our first year of the LA 318 or low angle block when from a 90 degree v angle to a 60 degree v angle and all the internal parts fit from la to a

when you guys came to tucson, it seemed dulsich wasnt having a good time. i hope he comes back next year. he was a cool guy. thanks for the videos

@jackdaniel1362

5 жыл бұрын

Cheers fellow Tucsonian

"It's got the sand dude. The what? The sand, it's the new thing."

Hey man nice video I have the same engine in an old truck and I was trying to educate my self on it a little bit for a sale out of curiosity how much you you buy one of these for?

I swapped a low miles Tquad 340 into my 70 RR 440-6 "back in" about 73. Excellent. You are talking about a "350 Chevelle" Got 17.5 mpg with no effort, and would stay with a 383 RR

you guy's forgot to mention that 360's are externally balanced not internal like the others.

@codyshipley7905

6 жыл бұрын

feff they also forgot to mention 360's are trash

@michaelweber5968

6 жыл бұрын

Get a 1971 360 (it has 340 heads) put a good Cam and 4 bbl carb on it and you will be surprised how good they can be.

@frigglebiscuit7484

5 жыл бұрын

@@codyshipley7905 you wish.

@claytonhaske

4 жыл бұрын

@@michaelweber5968 I'm looking at a 360 with 340x heads, small cam, 4 barrel carb. What would you say your getting out of yours horsepower wise?

I have the same stance on what bodies should have which engines.

I got a 318 in my 71 satellite as well.

5.2 and in limited quantities, 5.9 magnum featured a guest appearance in the first generation 1993-1998 jeep grand cherokee ZJ in the higher trim models vs the 4.0 AMC inline 6 in the lower trim models.

Upto 1967 the smallblock 318 was only available in the "polly" wide block version. The LA took over in 67 after

My 66 charger (B-body) has a 318 😕

Ahh small block mopar my first v8 and still the only v8 I’ve owned

Hey Steve, I need a 318 for my 1986 Ram D-150 Custom Royale. I think you have one "lying around" somewhere on the ranch!

Does anyone know what that intake and carbs are? I can see holly on the side of the carb