"True to scale power to weight ratio." So in other words, it's super underpowered for an RC plane.

@Crispy_Crisp

9 ай бұрын

lmao yeah

Back in ‘69 and on including in Viet Nam I was around many of these while in the USMC. They are very impressive to see flying in real life action. Nice job Zack. Semper Fi.

Im about to maiden my foam board built bronco. Definitely a neat plane!

1:12 just so you can replay and keep laughing 😂😂😂😂😂😂😂😂

@Travis_22

3 ай бұрын

Hahaha

Love the impersonation of a certain individual at 1:07 😂

I've been waiting slowly all week for this.

I have a BlackHorse OV-10 that I bought from MotionRC when they were first available. It wasn’t available with gear or servos, but it is very well built. I’m flying with two 4S 5000’s per motor and a 2S 2200for the receiver. When cleaned up, the CG is about 7mm in front of CG giving it a very locked in feel until you step on a rudder fully and you can almost stall (I say almost because I’ve never tried it after the first time). I installed Vario Props with scorpion motors. I get over ten minutes with the setup and really like the look in the air. It will cruise at just below half throttle, but will need 3/4 throttle to get out of the dive scale. If you like building I’d say this is the aircraft for you. I also put scale warbird pilots in the seats to get the aircraft in CG.

I've always liked the look of the Bronco. You could always upgrade the motor/esc and put a higher cell count battery in it. 😁 Is that your next video?

Love the Ronco...Shes a beautiful bird! Draws nice lines in the sky

Fair appraisal, I've been flying one for a couple of years and after the initial flights installed a Jeti Assist (Gyro) Rx to combat the Dutch Roll. To secure the wings I substituted Allen headed screws and a ball headed Allen driver which helps.

I have the Dan's model,it flies gracefully ❤

I love the Bronco. Good to see it getting some scale love!

So glad you guys reviewed this! One of my all time favorites. Great review as always but now I want one every more! Sorry to sound like a broken record but Bison XT for a future review? Thanks again for the great video! 👍🏻👍🏻

finally a new video! great quality

I love how many times you said scale in this video. 👍

I converted mine to a single 5000mah 4S and it fly's very well. Less flight time but better performance.

I'm actually looking into getting the bronco, it's perfect for me, slow casual flights are all I do and I adore scale aircraft.

Please make more videos. (I watched all of your videos more than 5 times) They are SOOO good!😄 PS can you make a review of HOBBYZONE Aeroscout?

I came here from Cleets sir race video 😂, hell yeah a cleetus plane would be gold.

This is exactly what I've been looking for.

I love your videos, thank you ❤

Time for a upgrade to crazy town. FL B-25 or EC- 1500 power system and props. That should give it a good swift kick ;-). I like this OV-10 and that's what I would do to it. I hope to one of these days. Another great video gentlemen.

I just bought an arrow Bigfoot rtf. Going to get here soon. I can’t wait!

Looking foward to the video!

I LOVE THESE REVIEWS ❤❤❤

Didn't understand 70% of the terms in this video; but I still liked it

This thing looks incredible

I love this model,,, its my favorite boring flyer.

Cleeetusss hell yeah brother!

I find this plane relaxing to fly after I have white knuckles my Mustang for a bit.

LOVE the OV-10

This video is amazing !!

Can you guys review the Xfly Alpha Jet? I maintain the A model in real life and have been wanting to buy it, but I'm not entirely ready to dive into my first EDF jet if it has bad habits. Love the video's guys!

Hey, I love Cleetus videos! Lol

Yeess, New video!!

Damn, Cleeter getting two shout-outs! Where you at Cleet?

Bronco is beautiful!

We need a flying Leroy

Hell yea, brother

Thanks!

It resembles how i imagine the eflight Beechcraft D18 looks if you left the wing tips at home and decided to fly the damn thing anyway. Also, i cant wait to use the term, "aircraft induced" the next time i retrieve the stick of shame to rescue a plane from greedy trees trespassing on my local flying spot. Thanks for expanding my vocab, TH!! 👍

Can you do a vid on the flex cap

The mention of “scale” = 47 times 😂

Mines a bit bendy after couple years but i like it.

Could it not be turned over to put the screws on the bottom in

1:06 next, we install our, *china* hobby line battery

@swampcritterisbackbaby1740

22 күн бұрын

Chy-na

❤❤❤❤

Great video! Keep telling it like it is. Also I like how you clearly state your preferences.

I want a RC of the Corvair Charger.

I’m curious what you’d think of the flightline b-25

@audigga4396

10 ай бұрын

Keen to see the B25 review as well.

@TailHeavyProductions

10 ай бұрын

Unfortunately that’s not a bird we’re planning to purchase but it does appear to be quite the looker!

@CalebT_RC

10 ай бұрын

@@TailHeavyProductions Ah okay, and I saw it has a good bomb drop

New videos woehueu

Just curious.. how is RemoteID hitting the RC plane market? Do any of the RTF planes come compliant now? Do they get around it by making them PNP, meaning we need to acquire our own modules?

@chikenfpv7798

10 ай бұрын

It got pushed back. RID is not in effect yet.

@Dartheomus

10 ай бұрын

@@chikenfpv7798 That's incorrect. Anything manufactured after last year must be compliant. With regard to individual compliance, if your aircraft is compliant, RID must be enabled. If you are waiting on a chip that is on backorder, then you have until next year... but you have to show that you have it on backorder.

@chikenfpv7798

10 ай бұрын

@@Dartheomus Again. Remote ID is not in effect.

@Dartheomus

10 ай бұрын

@@chikenfpv7798 You might want to watch pilot institute's recent RID update video.

@Dartheomus

10 ай бұрын

@@chikenfpv7798 Directly from the FAA site: "Drone pilots are expected to comply with the September 16, 2023, compliance date for Remote ID. However, the FAA understands that some drone pilots may not be able to comply because of limited availability of broadcast modules and lack of approved FAA-Recognized Identification Areas. In those instances, the FAA will consider all factors in determining whether to take enforcement action through March 16, 2024." Remote ID is absolutely in effect. It sounds as if the FAA reserves the right to enforce it on a case by case basis. My guess is this means you need to comply if you have a compliant capable craft. Please inform yourself before spreading misinformation to others.

Day 1 of seeing if you will try my RC plane recovery system

She was choochin

LESS GOOO NEW VIDDDDD i love you tail

its slows but its sooooo pretty

This review was amazingly useful. I thought this model was irrelevant to me, and learned that it might be perfect. Thanks a lot. The only thing I missed was a comment on its noise level. Important to front yard flyers like myself, hard to assess through KZread.

@TailHeavyProductions

10 ай бұрын

Thanks! She isn’t all that noisy, you should be good to go 👍

@toolbaggers

9 ай бұрын

It's an electric powered tractor setup with largish props. A powered plane really can't get quieter than that.

The term GOAT is unbelievely devaluated. It is used to often in the wrong setting.

Chiynaaa

I love this channel

So are you building the flying model of Cleeter or is motionRC gonna build it either way I'm ready and I'm pretty sure including MotionRC in the title is why you popped up in my feed 😂 because I watch all Cleetus videos and a fair amount of RC videos but this is the first time you've been recommended but you gained a sub and a whole video view so win for both of us 😂

Didn't you guys just like a month ago say you weren't doing reviews anymore?

@TailHeavyProductions

10 ай бұрын

We said we aren’t doing sponsored reviews anymore. We now always pay for the plane on our own out of pocket for any review you’ll see us do. 👍

@Krash_fpv

10 ай бұрын

Copy that.....I like your reviews because you actually know what your talking about and how to articulate your actual feelings.. not just how to say "plane good 9 out of 10" and in reality flies like the Japanese in pearl harbor. 😂😂😂

Wear are these you have none of these drones like were is the ac 130?

Sounds like twilight zone

3 more hours till I get my rc :0

Cleetus would just crash it anyway. Lmao. His..... skills...... are a work in progress. LMAO

Why do you want to fly Cleetus McFarland? lol

That’s my kind of plane. SCAL3 and slow.

I'd don't know if you have time, or if it's to much to ask or you just can't, but can you make a review video of (in my opinion) the best plane ever, the extreme flight turbo Bushmaster, because i don't go bushflying with mine or do rolling hariers 3 feet above the ground(I do it at 40 feet) , mainly because I have no Bals and maybe because I'm only 14, this is just a question of a stupid 14 year old that does nothing except flying and watch your videos, so don't take this seriously but maybe just maybe,,,, think about, Thanks!

@cwojcik_rc

10 ай бұрын

👀

Where is my Nitro Timber?

chaina

Cleeetusss🇺🇸🦅🇺🇸😁🇺🇸🦅🇺🇸🦅 just slap a turbine one it 🦅

Seems a bit to expensive for a beer cooler. Balsa flies Better.

@TailHeavyProductions

9 ай бұрын

That’s a blanket statement that just simply isn’t always true. 👍

$400

Yeah But is it Scale

@reckemroysrc3764

10 ай бұрын

It really is

Man, you guys are so easy on everyone but the guys over at Horizon. It's almost like you are biased.. Like really biased.

There's certainly some irony in arguing that reviewers only say airplanes are good because they're sent to them; whereas you, being independent free thinkers, spend your own hard-earned cash on a plane only to complain about how bad it is the whole time... And compare it to other planes you bought that also suck. Who's having more fun? The people who fly airplanes that are sent for review, or you guys who fly stuff you buy just to complain about it.