I’ve been a roofer for a long time, and my boss has done it for 30+ years. I love to see a well done slate roof. Keep at it boys 🤟🏼
@BuildWithAE
3 жыл бұрын
Many thanks Wilkesy! 👍
@simonruddy82653 жыл бұрын
I can imagine how happy the client must have been to being told the roof has to be all over again after being recently done, incorrectly. Your attention to detail, patience and quality of workmanship, legendary.
@BuildWithAE
3 жыл бұрын
Thanks for your kind words Simon, take care 👍
@RagingBlade14 жыл бұрын
This is the difference between someone who loves his craft and someone who is in it for the money alone. I am not a builder or roofer but like the way you explain how you do your work. It's not about finishing the job but standing back and being proud of your work. Well done Will and Rick. I saw your other job in Coventry (business premises) then ended up watching more of the A&E videos. Keep up the good work and GOD BLESS.
@GSXRRizla4 жыл бұрын
Top class no substitute for hard grafters, good old school skills... respect
@BuildWithAE
4 жыл бұрын
Thanks for watching Rizla 👍
@rooftechnortheast3 жыл бұрын
A couple of tips for you. Don’t rag the old with the new like that put a straight row in the bottom looks neater. Always cut your slates on the back not the front to get the chamfer the right way and strike the roof up.
@jamespratt66004 жыл бұрын
There is a nice trick for valley slates to avoid any pre cutting. In the video when you offer up the full slate, if you were to spin it 180, keeping it face up and line the bottom of the slate along the bottom of the slating course and move the corner to the valley line. Now mark on your slate where the next slate perp is and you have your bottom mark. Keeping the slate in that position, slide it up the roof till the bottom left (in this case) corner of the slate meets the line in the valley and the other side of the slate is either against the slate next to it vertically or if it's a smaller cut it will travel across the top of the slate next to it. Then mark where the corner of that next door slate meets your slate. As I say this mark will either be on the long side or the short side of your slate depending on the size of the cut. I allow a couple of mm less in marking for the slating gap as well. It sounds complicated but it's piss once you crack it. Try roughly scratching on the slate what you think the cut will look like, it will help keep you on track to start with. With this method if you mark and flick out your whole roof 3 slates wide you can go round and slate all your valleys first. Then you can get in nice and close without struggling to see. All the best 👍
@djviper793 жыл бұрын
Working in one of the last operational slate mines in the uk it alway makes me smile to watch a well installed slate roof
@BuildWithAE
3 жыл бұрын
No way! Whereabouts is the last operational slate mine located in the UK Jeff? Glad you enjoyed the video, have a great evening 👍
@djviper79
3 жыл бұрын
@@BuildWithAE not the last but one of only a few left, I work for J.W.Greaves in Blaenau ffestiniog, we’ve still got three producing quarries, but in the 1880 hey day we had 24+ mines/quarries, I watch so many “professionals” on here who don’t have a clue, it’s refreshing to see someone who knows what to do, ya got a new subscriber my friend, take care and have fun
@alfa159life74 жыл бұрын
I’ve no idea why I’m watching this but it’s kind of addictive 😂😂
@andrewarnst96732 ай бұрын
Immaculate work no bodging here😊
@stevesamoffgridsmallholdin53783 жыл бұрын
I first could tell this was going to be a good video clear precise load talking with confidence. Great watching someone who knows what they are doing.
@coops66214 жыл бұрын
We used TLS Gold on a loft conversion as it was spec'd - quite expensive. We also had a fussy BCO who wanted it draped between rafters as we weren't using counter battens. Fortunately we had only a small area done to strip off. One to watch!
@adamkhalilkfskfvwesg67633 жыл бұрын
So respectful of you guys, showing love for a beautiful trade.
@albertbusscher42703 жыл бұрын
congrats from a 90 year old plumber, beaut job, well done
@louikn__71794 жыл бұрын
Cut the slates on the back, that way the front has the rivened edge and looks natural 👍
@BuildWithAE
4 жыл бұрын
Usually cut slates this way but I'm always learning and will try this on the next job, thanks for the tip and thanks for watching! 👍
@louikn__7179
4 жыл бұрын
@@BuildWithAE although nobody sees it from the ground, it makes good IG photos 😉 will tag you in one i done recently, see what you think
@geoffdecorator3072 жыл бұрын
Back in the early 80s as a young Decorator i got sent by the firm to paint some timber work on a roof job being done ,nothing too difficult about that i thought until i got there and it turned out to be a Church roof a mile up in the air ! Jesus Christ almighty my bottle went but managed it non the less and those roofers who were doing the slates with little or no scaffolds were fearless .No way on earth could i go up that height these days at 58 ,but the best was my late Fathers good mate a certain Fred Dibnah ,balls of steel he had .
@alexpoole76264 жыл бұрын
I'm a carpenter but mainly work in internal first and second fix. Haven't had a chance to do much roofing so far, but always been interested on the roofing aspect. Find these videos really interesting. Great work!
@BuildWithAE
4 жыл бұрын
Many thanks Alex 👍
@paulleigh53512 жыл бұрын
Great videos fellas. I’ve been a roof tiler since 1983. 🤦♂️ And what I have learned. Is everyday is a school day. 👍
@michaelmorgan92893 жыл бұрын
Once again watching a craftsman at work is a joy.
@AliKhan-ju6jn4 жыл бұрын
Great job mate, good quality work,so you should be proud of your work I like those who graft good and dont do short cuts thanks for showing your video. 👍
@BuildWithAE
3 жыл бұрын
Thanks for watching Ali 👍
@hally12hally4 жыл бұрын
Roofer from the North West of Ireland here so I feel your pain with the weather as it never stops raining over here. Couple of tips from one roofer to another. Cut your natural slates from the back for the champered finish on the front looks a lot nicer, also if you spray the old slates that you saved with hypochlorite acid they'll look brand new and doesn't damage them, I do it all the time. Just be careful not to get it on your leadwork as it turns it brown. Keep up the good work 👍
@BuildWithAE
4 жыл бұрын
Some great tips there! Thanks for watching 👍
@shaundell46304 жыл бұрын
Thank you for the great tutorial on some roofing tips. I always roofing interesting because for it is 1 of the most crucial parts of any build to get 100%. Well done!
@BuildWithAE
4 жыл бұрын
Hi Shaun, Glad you found the video informative. One of the most important things of any building is the roof, and Will definitely knows how to get it right! Thanks for watching. All the best, John 😊
@jason.martin4 жыл бұрын
So good to see! I was watching stu crompton from best bricky and your video came up on the side bar, perfect timing from brick walls to slate roofs.
@BuildWithAE
4 жыл бұрын
Hi Jason incredible bricky Stu Crompton love his channel, thanks for watching and glad you enjoyed the video all the best Tony 👍 have a awesome weekend
@Jordon_arch3 жыл бұрын
I’ve not long started in the roofing trade, but I have to say I’m loving it! Great video very informative cheers 👍
@marssellbrylkowski2944 жыл бұрын
High quality worker. He knows how to do it. Very professional. Keep it like this boys
@jewellers4 жыл бұрын
This is a such a great way to advertise your work which looks fantastic - Am sure you'll get a lot of business from it.
@dread48363 жыл бұрын
All the comments are positive mate, solid work and great attitude. The satisfaction of doing a great job is lost on most people, as more often than not it is only the money that motivates them.
@amazegh20003 ай бұрын
beautifully done
@tommoore52724 жыл бұрын
Our High Gothic Victorian House and Carriage House was built in 1870 and has the original slate roof in near perfect condition, that makes the life cycle cost of the roof far below the cheapest asphalt, or wood roof today.
@ravenmoore84324 жыл бұрын
If I ever hit the lottery I will make sure to hire you folks and fly you to Canada too due my roof cause holy shit this looks so much better the shingles
@reddevil70Ай бұрын
Great job lads ! And a Man Utd fan 👍
@joejoey3163 жыл бұрын
Artist at work, ya love too see it, top notch workmanship 👌
@BuildWithAE
3 жыл бұрын
Thanks for your kind words 👍
@tlabort3 жыл бұрын
This guy knows his stuff. Top job Good tradesman
@BuildWithAE
3 жыл бұрын
Thanks bud, take care 👍
@boris100ish4 жыл бұрын
More quality work. Another happy customer. Ridge tile comment very funny 😂. All the best Pete
@krazykozey22593 жыл бұрын
I live in Florida and really want to fly over and buy y'all some drinks lol. Love your work and I'm addicted to watching your videos. Must be hard walking around with coconuts for nuts 😆. Cheers Boys!
@edouble844 жыл бұрын
Valley tip for ya.turn ur slate upside down,butt the bottom of the slate to the slate next to the valley,move the slate along until the bottom corner hits ur valley line,then mark where the 2 slates meet(leave a 3mm gap if ur azi slating)Next,move the slate up along side the last slate and bring the top corner of the slate on to the valley line n mark the slate.ince u get the hang of marking once instead of doing 2 cuts it saves loads of time
@onpointplastering4 жыл бұрын
Nice 1 lads mainly plastering I do but done a few roofs in my time tiles ,spanish,Welsh,Burlington and scotch slating in diminishing courses, all scottish method nailed onto sarking boards 👍
@BuildWithAE
4 жыл бұрын
We've checked out your channel Gordon and especially some of your roofing videos. Great work 😊👍
@onpointplastering
4 жыл бұрын
@@BuildWithAE going to be a while before I'm back on the tools but everyones health comes first hope everyone stays safe during these hard times 👍
@BuildWithAE
4 жыл бұрын
@@onpointplastering You too Gordon, stay safe bud 👍
@Amarillobymorning7774 жыл бұрын
Great job. Greetings from Toluca Mexico. We build the roof with rebar and concrete.
@BuildWithAE
4 жыл бұрын
Thanks Mario, its awesome to know your watching our videos
@kevin71514 жыл бұрын
Excellent work. I wish you worked in the Northeast in the US. You would have work forever! Take care and thanks for the video
@BuildWithAE
3 жыл бұрын
Thank you for the kind words Kevin, take care 👍
@danielmoore21424 жыл бұрын
Great to see a tradesman they really care about his work 👌🏻
@way2go7232 жыл бұрын
Lovely job lads 👌 Pure professionals
@identitywithheld10273 жыл бұрын
Subscribed. You have an ability to explain things in clear and concise terms.
@BuildWithAE
3 жыл бұрын
Thanks for watching bud 👍
@lukepeacham96633 жыл бұрын
Great work you are a very good teacher
@BuildWithAE
3 жыл бұрын
Thank you! 😃
@geoff40184 жыл бұрын
You need to get a slate pick my friend how do you deal with a knot In the batten you cant spin the estwing and use the hickory handle like a traditional pick, I love watching how other roofers work nice job👍, do you not dowel your roll top ridges.
@dannythwaites6112
4 жыл бұрын
It's frustrating seeing people use a claw hammer when slating. It's just not the right way. A brades is always 1st choice.
@BuildWithAE
4 жыл бұрын
Hey Geoff, I do all sorts of roofing so I find that the eswing works best for me. Many thanks 👍
@geoff4018
4 жыл бұрын
@@BuildWithAE Hi pal yes what ever works best for you, I use estwing every day the worlds best hammer but as soon as the slates are going on the pick is out when you find the right pick for you (weight, length etc) you will never use a claw again. All the best, keep on roofing 👍🏴
@jamesbaxendale96183 жыл бұрын
Great video but you should have marked and cut your slate on the back side then you get your splayed edge also always stack your slates holes to the left then they are ready for knocking on
@ronniebiggs40264 жыл бұрын
Love the total enthusiasm 💪 and the level of detailed knowledge.
@BuildWithAE
4 жыл бұрын
Much appreciated Ronnie! 👍
@paulhopkins26354 жыл бұрын
Great job. And a few little things picked up off you. 👍🏻
@MrMegan19623 жыл бұрын
Brilliant job mate very professional, pity no ones ever gona see it
@MrDockin4 жыл бұрын
Nice work, great enthusiasm. Would have done the lay boards prior to felting but nice to see different ways of working.
@fasilbd84 жыл бұрын
Excellent work mate. You make it look easy.
@wonkeyleggs3 жыл бұрын
I like a cemented Ridge, so many roofers using the dry fit . Keep up the good skills m8
@BuildWithAE
3 жыл бұрын
Thanks for watching 👍
@rabohamilton9404 жыл бұрын
I work as a roofer in Northern Ireland we do things so differently.... no dye lines? No slating axes? And you don’t load the roof with slates in straight lines,amazing how techniques change just over the water good content keep it up !
@Jcoughlan
4 жыл бұрын
whats a dye line?
@Aye03033 жыл бұрын
I really appreciate the teaching Roof sensei
@BuildWithAE
3 жыл бұрын
Thanks bud 👍
@gerrylea1214 жыл бұрын
Amazing work great to see a true craftsman 😊
@jeannekane1363 Жыл бұрын
Brilliant roofer great work
@myfaceback1004 жыл бұрын
I well agree that is one of the few job i will not try as i don't want to get wet at 2 am during a storm
@isabelmariavalades14074 жыл бұрын
Another great video lots of great tips well done keep safe 👍👍👍
@BuildWithAE
4 жыл бұрын
Many thanks 👍
@OTG973 жыл бұрын
Deserve all the credit you get great work 👍🏻👌
@BuildWithAE
3 жыл бұрын
Thank you Joe 🙌
@vanillarain7113 жыл бұрын
Incredible video! Thanks for sharing your knowledge!
@BuildWithAE
3 жыл бұрын
Glad you liked it! 👍
@dv89614 жыл бұрын
Cheers for the content, learned a lot! Quality work, quality video! Looking forward for more!
@mkl54484 жыл бұрын
These guys could teach us in the states a thing or two. Good quality slate work is, unfortunately, a dying art, and those who are willing to do it, are in short supply. Rock on fellas.
@BuildWithAE
4 жыл бұрын
Many thanks Mk L! 👍
@yessirrrrr_daddy2 жыл бұрын
Slate is pretty dope, damn
@MrMkapusta4 жыл бұрын
Much respect, Roofing is one tough job!
@BuildWithAE
4 жыл бұрын
Thanks for watching Cro Boy 👍
@bender69424 жыл бұрын
Southerner with a United hat on typical 🧐
@keithpilkington9074 жыл бұрын
Lovely job mate nice work
@BuildWithAE
4 жыл бұрын
Many thanks Keith! 👍
@keithpilkington907
4 жыл бұрын
@@BuildWithAE what job are you on at the mo mate at least the suns on our side for the minute haha be safe fellas
@jasbo72884 жыл бұрын
I had a composite slate roof done on my house about 3 years ago and I'm really happy with it..Have you any videos of you mate doing one of these types of roof???
@michaelbirchall22472 жыл бұрын
Great work and very informative video, thank you. Just one question at 7:30 did you mark the lead with a nail? I was told to use a felt-tip pen to mark lead as a pencil will scratch the lead causing a weak spot for crack to appear. What are your thoughts on this?
@tempus_fugit73663 жыл бұрын
I hope I'm not the only America to see the name of the channel and think, "Looks like A&E has a new construction docu-series." LOL. Anyway, it's really cool to see modern construction techniques on older home renovations.
@BuildWithAE
3 жыл бұрын
Hi Tempus Fugut73 we get that a lot 😂 thanks for watching all the best Tony 👍
@joeverna54593 жыл бұрын
roofing is a young mans job.
@bluewaverenovationsltdpurt81043 жыл бұрын
Great stuff once again, cheers from Brighton.
@graemepae28394 жыл бұрын
A great informative vid. Obviously you two are quality tradesmen, unlike the weapons that slated that roof first time round with the slate heads not sat on the batten, the mind boggles. Great stuff, and keep up the good work!! ps...Personaly id have cut the valley slates from the back so the shamf is on the front.. but my preference
@BuildWithAE
4 жыл бұрын
Hi Graeme Pae, Glad you enjoyed the video. It is a shame that we have to re-do people's work, but unfortunately there's a lot of sub standard work out there 😕 Thanks for watching. All the best, John
@edgarromero14824 жыл бұрын
very good work
@khndenmark4 жыл бұрын
Beautiful job guys. Do you also work in Denmark? I have a house, it’s 10x25 meters and I think the roof is about 45 degrees. My house is more than 100 years old and I need exactly the same job done. Will you please give me a offer? Best regards Klaus
@jonathansoons20743 жыл бұрын
Top class video, my dream job, wish I was a roofer
@BuildWithAE
3 жыл бұрын
Thanks for watching bud, take care 😎👍
@johntaylor1102 жыл бұрын
Really good ❤️🐇👍.
@baccus613 жыл бұрын
Awesome video mate. Good one to come back to again and again.. Thanks for making it. :-)
@MegaAmas1234 жыл бұрын
I love your positive energy, great job, keep on going mate.
@LegionUK4 жыл бұрын
Straight piece of baton, I wish. Good job tho love seeing it
@BuildWithAE
4 жыл бұрын
It is a rare occurrence Legion, but we do manage to find them occasionally 😉 All the best, John 😊
@rodneythomas82402 жыл бұрын
Well done cracking job 👍
@BuildWithAE
2 жыл бұрын
Thanks 👍
@migfredcastillo37063 жыл бұрын
Awesome advice boss... that looks great 👍
@BuildWithAE
3 жыл бұрын
Glad it was helpful! 👍
@jlewis16884 жыл бұрын
Nice job !! same about the code 4 lead in the valley that not so good
@BuildWithAE
4 жыл бұрын
Hi Jlewis Code 4 can be used for soakers, flashings, pitched valley gutters, dormers, vertical cladding and canopies Regards Tony
@2loco
4 жыл бұрын
Nothing like good old lead for flashing.
@pepitofeliz7862 Жыл бұрын
AWSOME
@bobmartin51014 жыл бұрын
Nice job, a proper craftsman. Great to watch. Peace.
@BuildWithAE
4 жыл бұрын
Thanks Bob, take care 👍
@MrGlenfraser4 жыл бұрын
Wonderful work.....
@BuildWithAE
4 жыл бұрын
Much appreciated Glen 👍
@thomastesarek32473 жыл бұрын
Nice work. You’re a real craftsman !
@vespagd674 жыл бұрын
Nice job like watching your videos keep up the good work stay safe guys 👍😊
@BuildWithAE
4 жыл бұрын
Thanks Gary 👍 keep family and friends Safe regards Tony
@mrmilner10964 жыл бұрын
Lovely job
@py_tok55893 жыл бұрын
NICE ONE AS USUAL
@BuildWithAE
3 жыл бұрын
Thank you! Cheers! 👍
@BaseWonky3 жыл бұрын
Way to go boys
@GTez904 жыл бұрын
Nice job fellas 👍🏼
@BuildWithAE
4 жыл бұрын
Thanks for watching Joe, take care 👍
@robertruizcampwolfden85794 жыл бұрын
I remember coming across very few slate roofs that are installed with galvanized nails on repair jobs , not always the installers fault , you can be the best and have all the knowledge but depending on seagulls dropping clams on your roof or the quarries the slate came from some crack and when they do , out comes the slate puller and it sucks pulling galvanized nails with a slate puller , please always use copper nails on your slate roof!
@BuildWithAE
4 жыл бұрын
Hi Robert, Copper nails are an absolute must with slate roofs. We get through a lot of them! Thanks for watching. All the best, John 😊
@latin105fm4 жыл бұрын
Hi there. Great video and you obviously know your stuff, hence why I’m sure you can answer my question. You had a loft conversion done which was perfect but the grey Spanish slate tiles flap in the wind. I’m guessing they haven’t been out on properly. :(
@rkbuilder7483 жыл бұрын
You do a fantastic job bro
@BuildWithAE
3 жыл бұрын
Thank you so much 😀
@markspencer85634 жыл бұрын
Great Utd hat!!
@TheToolnut4 жыл бұрын
Tasty craftsmanship men, where are ye from? South of England I'd say... Ever tried a straight clawed Estwing?? Very good instructional videos on roofing, 👍 😁 🔨 🇮🇪
@crappo84594 жыл бұрын
Nicely done 😎
@BuildWithAE
4 жыл бұрын
👍👍
@ianhoare2894 жыл бұрын
Building control 10 years ago made us counter batten over tlx gold before the slating battens went on.
@BuildWithAE
4 жыл бұрын
Hi Ian different council might have different ideas but you don’t need to, but it is always there call but the technical show that you don’t need to thanks for watching all the best Tony 👍 have a awesome weekend
@tinamcwilliams70293 жыл бұрын
You do nice work
@barringtonsmythe34644 жыл бұрын
Quality. Love this channel 👍👍
@sverduijn14 жыл бұрын
So at 6:22 you're nailing the wood to the insulation. Isn't that going to be a problem? Water might leak in throug the nail holes? Nice work and vid, thanks for taking the time to put it online
Пікірлер: 230
I’ve been a roofer for a long time, and my boss has done it for 30+ years. I love to see a well done slate roof. Keep at it boys 🤟🏼
@BuildWithAE
3 жыл бұрын
Many thanks Wilkesy! 👍
I can imagine how happy the client must have been to being told the roof has to be all over again after being recently done, incorrectly. Your attention to detail, patience and quality of workmanship, legendary.
@BuildWithAE
3 жыл бұрын
Thanks for your kind words Simon, take care 👍
This is the difference between someone who loves his craft and someone who is in it for the money alone. I am not a builder or roofer but like the way you explain how you do your work. It's not about finishing the job but standing back and being proud of your work. Well done Will and Rick. I saw your other job in Coventry (business premises) then ended up watching more of the A&E videos. Keep up the good work and GOD BLESS.
Top class no substitute for hard grafters, good old school skills... respect
@BuildWithAE
4 жыл бұрын
Thanks for watching Rizla 👍
A couple of tips for you. Don’t rag the old with the new like that put a straight row in the bottom looks neater. Always cut your slates on the back not the front to get the chamfer the right way and strike the roof up.
There is a nice trick for valley slates to avoid any pre cutting. In the video when you offer up the full slate, if you were to spin it 180, keeping it face up and line the bottom of the slate along the bottom of the slating course and move the corner to the valley line. Now mark on your slate where the next slate perp is and you have your bottom mark. Keeping the slate in that position, slide it up the roof till the bottom left (in this case) corner of the slate meets the line in the valley and the other side of the slate is either against the slate next to it vertically or if it's a smaller cut it will travel across the top of the slate next to it. Then mark where the corner of that next door slate meets your slate. As I say this mark will either be on the long side or the short side of your slate depending on the size of the cut. I allow a couple of mm less in marking for the slating gap as well. It sounds complicated but it's piss once you crack it. Try roughly scratching on the slate what you think the cut will look like, it will help keep you on track to start with. With this method if you mark and flick out your whole roof 3 slates wide you can go round and slate all your valleys first. Then you can get in nice and close without struggling to see. All the best 👍
Working in one of the last operational slate mines in the uk it alway makes me smile to watch a well installed slate roof
@BuildWithAE
3 жыл бұрын
No way! Whereabouts is the last operational slate mine located in the UK Jeff? Glad you enjoyed the video, have a great evening 👍
@djviper79
3 жыл бұрын
@@BuildWithAE not the last but one of only a few left, I work for J.W.Greaves in Blaenau ffestiniog, we’ve still got three producing quarries, but in the 1880 hey day we had 24+ mines/quarries, I watch so many “professionals” on here who don’t have a clue, it’s refreshing to see someone who knows what to do, ya got a new subscriber my friend, take care and have fun
I’ve no idea why I’m watching this but it’s kind of addictive 😂😂
Immaculate work no bodging here😊
I first could tell this was going to be a good video clear precise load talking with confidence. Great watching someone who knows what they are doing.
We used TLS Gold on a loft conversion as it was spec'd - quite expensive. We also had a fussy BCO who wanted it draped between rafters as we weren't using counter battens. Fortunately we had only a small area done to strip off. One to watch!
So respectful of you guys, showing love for a beautiful trade.
congrats from a 90 year old plumber, beaut job, well done
Cut the slates on the back, that way the front has the rivened edge and looks natural 👍
@BuildWithAE
4 жыл бұрын
Usually cut slates this way but I'm always learning and will try this on the next job, thanks for the tip and thanks for watching! 👍
@louikn__7179
4 жыл бұрын
@@BuildWithAE although nobody sees it from the ground, it makes good IG photos 😉 will tag you in one i done recently, see what you think
Back in the early 80s as a young Decorator i got sent by the firm to paint some timber work on a roof job being done ,nothing too difficult about that i thought until i got there and it turned out to be a Church roof a mile up in the air ! Jesus Christ almighty my bottle went but managed it non the less and those roofers who were doing the slates with little or no scaffolds were fearless .No way on earth could i go up that height these days at 58 ,but the best was my late Fathers good mate a certain Fred Dibnah ,balls of steel he had .
I'm a carpenter but mainly work in internal first and second fix. Haven't had a chance to do much roofing so far, but always been interested on the roofing aspect. Find these videos really interesting. Great work!
@BuildWithAE
4 жыл бұрын
Many thanks Alex 👍
Great videos fellas. I’ve been a roof tiler since 1983. 🤦♂️ And what I have learned. Is everyday is a school day. 👍
Once again watching a craftsman at work is a joy.
Great job mate, good quality work,so you should be proud of your work I like those who graft good and dont do short cuts thanks for showing your video. 👍
@BuildWithAE
3 жыл бұрын
Thanks for watching Ali 👍
Roofer from the North West of Ireland here so I feel your pain with the weather as it never stops raining over here. Couple of tips from one roofer to another. Cut your natural slates from the back for the champered finish on the front looks a lot nicer, also if you spray the old slates that you saved with hypochlorite acid they'll look brand new and doesn't damage them, I do it all the time. Just be careful not to get it on your leadwork as it turns it brown. Keep up the good work 👍
@BuildWithAE
4 жыл бұрын
Some great tips there! Thanks for watching 👍
Thank you for the great tutorial on some roofing tips. I always roofing interesting because for it is 1 of the most crucial parts of any build to get 100%. Well done!
@BuildWithAE
4 жыл бұрын
Hi Shaun, Glad you found the video informative. One of the most important things of any building is the roof, and Will definitely knows how to get it right! Thanks for watching. All the best, John 😊
So good to see! I was watching stu crompton from best bricky and your video came up on the side bar, perfect timing from brick walls to slate roofs.
@BuildWithAE
4 жыл бұрын
Hi Jason incredible bricky Stu Crompton love his channel, thanks for watching and glad you enjoyed the video all the best Tony 👍 have a awesome weekend
I’ve not long started in the roofing trade, but I have to say I’m loving it! Great video very informative cheers 👍
High quality worker. He knows how to do it. Very professional. Keep it like this boys
This is a such a great way to advertise your work which looks fantastic - Am sure you'll get a lot of business from it.
All the comments are positive mate, solid work and great attitude. The satisfaction of doing a great job is lost on most people, as more often than not it is only the money that motivates them.
beautifully done
Our High Gothic Victorian House and Carriage House was built in 1870 and has the original slate roof in near perfect condition, that makes the life cycle cost of the roof far below the cheapest asphalt, or wood roof today.
If I ever hit the lottery I will make sure to hire you folks and fly you to Canada too due my roof cause holy shit this looks so much better the shingles
Great job lads ! And a Man Utd fan 👍
Artist at work, ya love too see it, top notch workmanship 👌
@BuildWithAE
3 жыл бұрын
Thanks for your kind words 👍
This guy knows his stuff. Top job Good tradesman
@BuildWithAE
3 жыл бұрын
Thanks bud, take care 👍
More quality work. Another happy customer. Ridge tile comment very funny 😂. All the best Pete
I live in Florida and really want to fly over and buy y'all some drinks lol. Love your work and I'm addicted to watching your videos. Must be hard walking around with coconuts for nuts 😆. Cheers Boys!
Valley tip for ya.turn ur slate upside down,butt the bottom of the slate to the slate next to the valley,move the slate along until the bottom corner hits ur valley line,then mark where the 2 slates meet(leave a 3mm gap if ur azi slating)Next,move the slate up along side the last slate and bring the top corner of the slate on to the valley line n mark the slate.ince u get the hang of marking once instead of doing 2 cuts it saves loads of time
Nice 1 lads mainly plastering I do but done a few roofs in my time tiles ,spanish,Welsh,Burlington and scotch slating in diminishing courses, all scottish method nailed onto sarking boards 👍
@BuildWithAE
4 жыл бұрын
We've checked out your channel Gordon and especially some of your roofing videos. Great work 😊👍
@onpointplastering
4 жыл бұрын
@@BuildWithAE going to be a while before I'm back on the tools but everyones health comes first hope everyone stays safe during these hard times 👍
@BuildWithAE
4 жыл бұрын
@@onpointplastering You too Gordon, stay safe bud 👍
Great job. Greetings from Toluca Mexico. We build the roof with rebar and concrete.
@BuildWithAE
4 жыл бұрын
Thanks Mario, its awesome to know your watching our videos
Excellent work. I wish you worked in the Northeast in the US. You would have work forever! Take care and thanks for the video
@BuildWithAE
3 жыл бұрын
Thank you for the kind words Kevin, take care 👍
Great to see a tradesman they really care about his work 👌🏻
Lovely job lads 👌 Pure professionals
Subscribed. You have an ability to explain things in clear and concise terms.
@BuildWithAE
3 жыл бұрын
Thanks for watching bud 👍
Great work you are a very good teacher
@BuildWithAE
3 жыл бұрын
Thank you! 😃
You need to get a slate pick my friend how do you deal with a knot In the batten you cant spin the estwing and use the hickory handle like a traditional pick, I love watching how other roofers work nice job👍, do you not dowel your roll top ridges.
@dannythwaites6112
4 жыл бұрын
It's frustrating seeing people use a claw hammer when slating. It's just not the right way. A brades is always 1st choice.
@BuildWithAE
4 жыл бұрын
Hey Geoff, I do all sorts of roofing so I find that the eswing works best for me. Many thanks 👍
@geoff4018
4 жыл бұрын
@@BuildWithAE Hi pal yes what ever works best for you, I use estwing every day the worlds best hammer but as soon as the slates are going on the pick is out when you find the right pick for you (weight, length etc) you will never use a claw again. All the best, keep on roofing 👍🏴
Great video but you should have marked and cut your slate on the back side then you get your splayed edge also always stack your slates holes to the left then they are ready for knocking on
Love the total enthusiasm 💪 and the level of detailed knowledge.
@BuildWithAE
4 жыл бұрын
Much appreciated Ronnie! 👍
Great job. And a few little things picked up off you. 👍🏻
Brilliant job mate very professional, pity no ones ever gona see it
Nice work, great enthusiasm. Would have done the lay boards prior to felting but nice to see different ways of working.
Excellent work mate. You make it look easy.
I like a cemented Ridge, so many roofers using the dry fit . Keep up the good skills m8
@BuildWithAE
3 жыл бұрын
Thanks for watching 👍
I work as a roofer in Northern Ireland we do things so differently.... no dye lines? No slating axes? And you don’t load the roof with slates in straight lines,amazing how techniques change just over the water good content keep it up !
@Jcoughlan
4 жыл бұрын
whats a dye line?
I really appreciate the teaching Roof sensei
@BuildWithAE
3 жыл бұрын
Thanks bud 👍
Amazing work great to see a true craftsman 😊
Brilliant roofer great work
I well agree that is one of the few job i will not try as i don't want to get wet at 2 am during a storm
Another great video lots of great tips well done keep safe 👍👍👍
@BuildWithAE
4 жыл бұрын
Many thanks 👍
Deserve all the credit you get great work 👍🏻👌
@BuildWithAE
3 жыл бұрын
Thank you Joe 🙌
Incredible video! Thanks for sharing your knowledge!
@BuildWithAE
3 жыл бұрын
Glad you liked it! 👍
Cheers for the content, learned a lot! Quality work, quality video! Looking forward for more!
These guys could teach us in the states a thing or two. Good quality slate work is, unfortunately, a dying art, and those who are willing to do it, are in short supply. Rock on fellas.
@BuildWithAE
4 жыл бұрын
Many thanks Mk L! 👍
Slate is pretty dope, damn
Much respect, Roofing is one tough job!
@BuildWithAE
4 жыл бұрын
Thanks for watching Cro Boy 👍
Southerner with a United hat on typical 🧐
Lovely job mate nice work
@BuildWithAE
4 жыл бұрын
Many thanks Keith! 👍
@keithpilkington907
4 жыл бұрын
@@BuildWithAE what job are you on at the mo mate at least the suns on our side for the minute haha be safe fellas
I had a composite slate roof done on my house about 3 years ago and I'm really happy with it..Have you any videos of you mate doing one of these types of roof???
Great work and very informative video, thank you. Just one question at 7:30 did you mark the lead with a nail? I was told to use a felt-tip pen to mark lead as a pencil will scratch the lead causing a weak spot for crack to appear. What are your thoughts on this?
I hope I'm not the only America to see the name of the channel and think, "Looks like A&E has a new construction docu-series." LOL. Anyway, it's really cool to see modern construction techniques on older home renovations.
@BuildWithAE
3 жыл бұрын
Hi Tempus Fugut73 we get that a lot 😂 thanks for watching all the best Tony 👍
roofing is a young mans job.
Great stuff once again, cheers from Brighton.
A great informative vid. Obviously you two are quality tradesmen, unlike the weapons that slated that roof first time round with the slate heads not sat on the batten, the mind boggles. Great stuff, and keep up the good work!! ps...Personaly id have cut the valley slates from the back so the shamf is on the front.. but my preference
@BuildWithAE
4 жыл бұрын
Hi Graeme Pae, Glad you enjoyed the video. It is a shame that we have to re-do people's work, but unfortunately there's a lot of sub standard work out there 😕 Thanks for watching. All the best, John
very good work
Beautiful job guys. Do you also work in Denmark? I have a house, it’s 10x25 meters and I think the roof is about 45 degrees. My house is more than 100 years old and I need exactly the same job done. Will you please give me a offer? Best regards Klaus
Top class video, my dream job, wish I was a roofer
@BuildWithAE
3 жыл бұрын
Thanks for watching bud, take care 😎👍
Really good ❤️🐇👍.
Awesome video mate. Good one to come back to again and again.. Thanks for making it. :-)
I love your positive energy, great job, keep on going mate.
Straight piece of baton, I wish. Good job tho love seeing it
@BuildWithAE
4 жыл бұрын
It is a rare occurrence Legion, but we do manage to find them occasionally 😉 All the best, John 😊
Well done cracking job 👍
@BuildWithAE
2 жыл бұрын
Thanks 👍
Awesome advice boss... that looks great 👍
@BuildWithAE
3 жыл бұрын
Glad it was helpful! 👍
Nice job !! same about the code 4 lead in the valley that not so good
@BuildWithAE
4 жыл бұрын
Hi Jlewis Code 4 can be used for soakers, flashings, pitched valley gutters, dormers, vertical cladding and canopies Regards Tony
@2loco
4 жыл бұрын
Nothing like good old lead for flashing.
AWSOME
Nice job, a proper craftsman. Great to watch. Peace.
@BuildWithAE
4 жыл бұрын
Thanks Bob, take care 👍
Wonderful work.....
@BuildWithAE
4 жыл бұрын
Much appreciated Glen 👍
Nice work. You’re a real craftsman !
Nice job like watching your videos keep up the good work stay safe guys 👍😊
@BuildWithAE
4 жыл бұрын
Thanks Gary 👍 keep family and friends Safe regards Tony
Lovely job
NICE ONE AS USUAL
@BuildWithAE
3 жыл бұрын
Thank you! Cheers! 👍
Way to go boys
Nice job fellas 👍🏼
@BuildWithAE
4 жыл бұрын
Thanks for watching Joe, take care 👍
I remember coming across very few slate roofs that are installed with galvanized nails on repair jobs , not always the installers fault , you can be the best and have all the knowledge but depending on seagulls dropping clams on your roof or the quarries the slate came from some crack and when they do , out comes the slate puller and it sucks pulling galvanized nails with a slate puller , please always use copper nails on your slate roof!
@BuildWithAE
4 жыл бұрын
Hi Robert, Copper nails are an absolute must with slate roofs. We get through a lot of them! Thanks for watching. All the best, John 😊
Hi there. Great video and you obviously know your stuff, hence why I’m sure you can answer my question. You had a loft conversion done which was perfect but the grey Spanish slate tiles flap in the wind. I’m guessing they haven’t been out on properly. :(
You do a fantastic job bro
@BuildWithAE
3 жыл бұрын
Thank you so much 😀
Great Utd hat!!
Tasty craftsmanship men, where are ye from? South of England I'd say... Ever tried a straight clawed Estwing?? Very good instructional videos on roofing, 👍 😁 🔨 🇮🇪
Nicely done 😎
@BuildWithAE
4 жыл бұрын
👍👍
Building control 10 years ago made us counter batten over tlx gold before the slating battens went on.
@BuildWithAE
4 жыл бұрын
Hi Ian different council might have different ideas but you don’t need to, but it is always there call but the technical show that you don’t need to thanks for watching all the best Tony 👍 have a awesome weekend
You do nice work
Quality. Love this channel 👍👍
So at 6:22 you're nailing the wood to the insulation. Isn't that going to be a problem? Water might leak in throug the nail holes? Nice work and vid, thanks for taking the time to put it online
Good work
@BuildWithAE
3 жыл бұрын
Thank you! Cheers! 👍