By any chance can you do a video for the maxx servo

The 2255 seems a little overkill to me... the lower torque 2250 would probably be a better application (for less money).

@lada_niva_1.7i

2 жыл бұрын

does the 2250 fit in the slash 2wd?

@svpracer98

2 жыл бұрын

@@lada_niva_1.7i I don't see why it wouldn't, it's basically in the same case... just a lower spec'd motor torque wise

Make a 4tec vxl assembly kit

Nice servo

What are the specs on the 2075R?? I can't find them anywhere!

I'm here trying to figure out how to screw the servo saver on I don't have the nut to get it attached.

It's physically impossible to pull the wire out of the receiver box on mine unless i cut off the connector, how did they even get it out

Specs for 2075r ??

Is there a demonstration video on how to set a new servos endpoints? All i know is i need to go through codes using the transmitter.

@billb8564

3 жыл бұрын

Did you ever figure it out

@ellettron3731

3 жыл бұрын

@@billb8564 yeah, ibhave traxxas so I figured it out it's on page 34 of the slash 4x4vxl owner's manual. Advanced tuning guide follow menu tree formula for setting endpoints for the servo.

I just got a new stearing servo for my latrax prerunner,Should be here by thursday 👌

@Vato_Loco_rc

4 жыл бұрын

@@speedracer5046 You already knew that though brother😂

Nice 👌

Please Traxxas R&D can you get the Xmaxx’s stock servo squared away? My son and I babied ours and after 5-6 runs it stopped because the servo went bad. This was confirmed right from the soccer complex by Traxxas Support. Or please sell a bullet proof upgraded one. Please help your Supporters

DEAR TRAXXAS!!! PLEASE PLEASE PLEASE!!!! MAKE A SLASH VXL DRAGSTER CAR,,,,AND OR A KIT TO MAKE A SLASH INTO A DRAGSTER,!!! I WILL BE BUYING 1# ASAP!!!! AND SOOOO MANY OTHERS WILL PUT IT AT THE TOP OF THERE CHRISTMAS LISTS!!!!!!

@RC-ty5ym

4 жыл бұрын

They made a how to video

My spring came out of my servo saver and idk if i should just replace it and buy and upgrade or keep it and repair it. Please help me😭

@johnclark5692

4 жыл бұрын

Replace it. Its a cheap part. It's a bit of a headache to put the spring back in.

Traxxas support please help me with my 2wd slash the xl 5 is blinking red and green and my steering works but the back wheels won't

@TraxxasSupport

4 жыл бұрын

If you're using a NIMH battery, then the ESC may be in the wrong battery mode. You can find our video explaining how to turn Low Voltage Detection Mode off when using NiMH batteries here: kzread.info/dash/bejne/aKirlrGvhs7dedI.html

Doesn't seem to line up straight on the 4x4 can't go full lock one way

do you need to set steering n points if you upgrade to another traxxas servo?

@chadriddle3517

Жыл бұрын

Yes I believe you do

I have a Rustler VXL (2 wheel Drive-Generation 1 Chassis). The original 2075 doesn't work anymore. Should I replace it with a 2075-R or 2075-X?

@johnclark5692

4 жыл бұрын

I bought the 2075r for mine

@vidmon

3 жыл бұрын

@@johnclark5692 Traxxas just confirmed the 2075 "R" also. Thanks John...

Does this one fit in the rustler 4x4 vxl

@markoftheus

Жыл бұрын

Yes. 1/10th scale servos have a pretty much standardized size from all the different manufacturers.

question: do they fit in the slash 4x4 ?

@hotshot1381

3 жыл бұрын

Yep it’s just the servo on the 4x4 is located at a different place on the body and the installation would look a little different but they are the same

hi thanks for the notif!

Weird mine doesn't have a servo saver

@jamesguerrero6429

4 жыл бұрын

Mine either, I was wondering if that was normal

@markoftheus

Жыл бұрын

Depending on the vehicle, you may have different bell cranks. For example, the current Slash VXL comes with the black bell cranks that are used on the 4x4 variants of the Rustler, Slash, and Stampede. These use a cam style servo saver integrated into the bell cranks

Will these fit in a rustler 4x4?

@TraxxasSupport

4 жыл бұрын

Yes, they are compatible with the Rustler 4X4

@fcsthememe7987

4 жыл бұрын

Just get a Ecopower 120t, no problems at all and cheaper, faster, stronger.

@ludvikbreigutu1600

4 жыл бұрын

FC’s The Meme Will it fit in Rustler 4x4?

@randiff1688

4 жыл бұрын

Ludvik Breigutu yes

@markoftheus

Жыл бұрын

​@@fcsthememe7987 I use the Eco Power WP110T in my Rustler 4x4 and it's plenty for even less money.

Where tf is the motor?

@rickvandenhoven2470

3 жыл бұрын

in the rear its 2wd

1:16 into video I May Be WRONG. BUT,,, DIDNT THEY JUST SAVE AND REUSED THE PLASTIC SERVO GEAR ADAPTER ONTO THE NEW METAL GEAR SERVO??? JUST AFTER SELLING YOU ON THE METAL GEARED SERVO ... SO NOW YOUR SERVO HORN STILL SITS ON PLASTIC GEAR...... UMMMM HELLOOOOOOO..McFLY ARE YOU IN THERE 😆🤣😂

@TraxxasSupport

4 жыл бұрын

The adapter is part of the servo saver that attaches to the servo for use in the Slash. A metal servo arm can be attached directly to the servo when used with the steering bellcrank servo saver (#6845X) traxxas.com/products/parts/6845X

#first

@andresvillagomez75

4 жыл бұрын

Traxxas Slash Productions too bad you weren’t

I was the first like

@Sammy10100

4 жыл бұрын

@@logan1274 hey. I care. -:)

@shonuff420

4 жыл бұрын

@@logan1274 🙄🙄😂😂😂😂

Dont upgrade crap with more crap

Does this servo fit my 1/16 slash 4x4?

@LandenDenham

2 жыл бұрын

No