SkyRC RS TW Pro Professional RC Tire Warmer Basic functions

Basic RC Charger comparison Traxxas EZ Peak Live Hota D6 Hitec multi charger x2 plus for newbies
• Basic RC Charger compa...
Hota D6 + AC:DC Dual Channel Smart Charger Basic functions
• Hota D6 + AC:DC Dual C...
SkyRC RS TW Pro Professional RC Tire Warmer Basic functions
• SkyRC RS TW Pro Profes...
Other Recommendations:
Traxxas 4 tec 2.0 speedrun with Castle Creations Copperhead 1412 3200 motor thoughts on 2s
• Traxxas 4-tec 2.0 spee...
Traxxas 4-Tec 2.0 Speedrun top speed over 75mph 120km/h on 2s? Tekin RX8 Pro4 Type D Drag 6500kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 2.0 Speedrun Part 1 gear setups for over 60 mph 100kph on 2s Tekin RX8 Pro4 HD 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 2.0 Speedrun Part 2 math top speed over 60mph 100kmp on 2s? Tekin RX8 HD Pro4 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 3.0 Speed Runs 3s Hobbywing Max10 ESC 3660 4000Kv motor 35T pinion 55T spur 70MPH?
• Traxxas 4-Tec 3.0 Corv...
Must upgrades for speedruns and 2s suggestions for Traxxas 4 tec 2.0 3.0 Supra GT4 and Factory Five
• Must upgrades for spee...
Tamiya TC01 build:
For the body, skip to 5:44:22. I start with the finished product and some notes. Then I cover how to trim it.
Tamiya Team Hahn Racing Man TGS TT 01 Type E Truck Build Part 1 Unboxing
• Tamiya Team Hahn Racin...
Hobbywing V10 G4 21.5T data Analyzer and how it compares on paper to Trinity Xfactor Turnigy
• Hobbywing V10 G4 21.5T...
MyLaps RC4 Hybrid AIT10R078
AKA CA Glue
Hobbywig Electronics
Tekin
Castle Creations
Team Powers
Gens Ace
Gorilla Tape
JConcepts CA Glue
MIP Tools (Drivers)
Kobalt Pliers
Craftsman Pliers
Craftsman wrench
Tamiya Paint (PS-X)
Duratrax Paint by Horizon Hobbies
Savox Servo
Team Powers Servo
Traxxas Servo (for non-demanding applications)
Proline Bodies
Proline Tires
JConcepts Bodies
DE Wheels
WD-40
Yokomo Touring Tires
Team Powers Touring Tires
Dremel 4000

Пікірлер: 18

  • @txpatriot7038
    @txpatriot70386 ай бұрын

    I laugh at the lead in cartoon every time. Thanks for the review. This is something I rolled my eyes at a while back but now that I have everything else I might need this lol

  • @telecomandorc

    @telecomandorc

    6 ай бұрын

    😁 Glad you like the intro. They probably make a greater difference depending of the sauce. I friend uses Mighty Gripper (Orange) and swears by it. But I think that is more for the pros.

  • @kargausa553
    @kargausa5536 ай бұрын

    2 Steps and 3 Steps are for warming up tires 2-3 cycles, that's why there are 2-3 different temp settings and delay between them, this is especially useful if you want your compound (tire sauce) to be bounded your tire over the time, vs rushing it up and evaporating the sauce quickly before the tire sucks it.

  • @telecomandorc

    @telecomandorc

    6 ай бұрын

    Great explanation. Thank you.

  • @jmurray0482
    @jmurray04825 ай бұрын

    What is the maximum size tire you can use with those cups? If those are the 4tec 3.0 Supra tires, that means you can at least put in 2.8" tires which covers basically anything 1/10 scale. Also, what is the max width of tire you can warm? I'm hoping those cups will work for my 1/10 buggy and truggy tires.

  • @telecomandorc

    @telecomandorc

    5 ай бұрын

    With these cups, a 66mm or standard TC. For the bit larger sizes you will need the soft ones.

  • @roberthopson1526
    @roberthopson15267 ай бұрын

    Hi there great vid probably a silly question when using with a charger do you know what AMP you need to set the charger port to as power output ? or is it the same as a 4s liop

  • @telecomandorc

    @telecomandorc

    7 ай бұрын

    That is actually a very good question. I don't know because my charger does it all and the warmer brain draws what it needs. I would dare say it is the same as a 4s lipo as amp draw will more likely depend on the temp you set it.

  • @roberthopson1526

    @roberthopson1526

    7 ай бұрын

    @@telecomandorcok thanks for the info i'll have a look as i've just updated my charger to a skyrc D200 that has the port to plug the warmers into

  • @telecomandorc

    @telecomandorc

    7 ай бұрын

    @@roberthopson1526 The Hitec looking charger? How do you like it?

  • @roberthopson1526

    @roberthopson1526

    7 ай бұрын

    @@telecomandorc its pretty good at the monument I've only had it for a week so time will tell

  • @telecomandorc

    @telecomandorc

    7 ай бұрын

    @@roberthopson1526 Keep me posted.

  • @HL-OOI
    @HL-OOI2 ай бұрын

    Does the Hota charger able to do DC out and charge lipo at the same time? Will it get very hot? I plan to get this charger for the tire warmer instead of using external power supply..

  • @telecomandorc

    @telecomandorc

    2 ай бұрын

    It can do both at the same time. You can charge two lipos and use tire warmers.

  • @HL-OOI

    @HL-OOI

    2 ай бұрын

    Cool thanks for the info but I believe it will get quite hot with dc out..

  • @telecomandorc

    @telecomandorc

    2 ай бұрын

    @@HL-OOI I guess at that point it will depend on how hot it is at the pits.

  • @theStirp
    @theStirp5 ай бұрын

    What tires are those?

  • @telecomandorc

    @telecomandorc

    5 ай бұрын

    Traxxas Supra 2.0" wheels and tires. kzread.info/dash/bejne/eo1slragpJmTZbw.html