Inside Traxxas BL-2s motor specs turns measurements and rotor strength gauss reading
I end up tearing up the motor to count the wire turns and take other measurements. Therefore, I will not be reb=building this motor as I initially intended for reasons that will become obvious. So, I count the turns, measure rotor gouss, and take measurements of different components of the motor.
Consider watching:
Traxxas 4-Tec 2.0 BL-2s can it handle max gearing 55T spur 35T pinion?
• Traxxas 4-Tec 2.0 BL-2...
Traxxas BL 2s is not faster than a Titan 12T...initially... But it is still far better
• Traxxas BL 2s is not f...
Traxxas Supra 2.0" 9374 9375 tires on 4-Tec 2.0 review and comparison Best tires for Corvette 3.0
• Traxxas Supra 2.0" 937...
Must upgrades for speed runs and 2s suggestions for Traxxas 4-tec 2.0 3.0 Supra GT4 and Factory Five
• Must upgrades for spee...
Traxxas 4-Tec 2.0 Speedrun Part 1 gear setups for over 60 mph 100kph on 2s Tekin RX8 Pro4 HD 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 2.0 Speedrun Part 2 math top speed over 60mph 100kmp on 2s? Tekin RX8 HD Pro4 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 3.0 Speed Runs 3s Hobbywing Max10 ESC 3660 4000Kv motor 35T pinion 55T spur 70MPH?
• Traxxas 4-Tec 3.0 Corv...
If you have a 4-tec 3.0 reglue your tires if you upgrade the system for more speed for no fishtail
• If you have a 4-tec 3....
Traxxas 4-Tec 2.0 Speedrun top speed over 75mph 120km/h on 2s? Tekin RX8 Pro4 Type D Drag 6500kv
• Traxxas 4-Tec 2.0 Spee...
Basic RC Charger comparison Traxxas EZ Peak Live Hota D6 Hitec multi charger x2 plus for newbies
• Basic RC Charger compa...
Hota D6 + AC:DC Dual Channel Smart Charger Basic functions
• Hota D6 + AC:DC Dual C...
SkyRC RS TW Pro Professional RC Tire Warmer Basic functions
• SkyRC RS TW Pro Profes...
Other Recommendations:
Traxxas 4-Tec 2.0 Speedrun top speed over 75mph 120km/h on 2s? Tekin RX8 Pro4 Type D Drag 6500kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 2.0 Speedrun Part 1 gear setups for over 60 mph 100kph on 2s Tekin RX8 Pro4 HD 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 2.0 Speedrun Part 2 math top speed over 60mph 100kmp on 2s? Tekin RX8 HD Pro4 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 3.0 Speed Runs 3s Hobbywing Max10 ESC 3660 4000Kv motor 35T pinion 55T spur 70MPH?
• Traxxas 4-Tec 3.0 Corv...
Must upgrades for speedruns and 2s suggestions for Traxxas 4 tec 2.0 3.0 Supra GT4 and Factory Five
• Must upgrades for spee...
Tamiya TC01 build:
For the body, skip to 5:44:22. I start with the finished product and some notes. Then I cover how to trim it.
Tamiya Team Hahn Racing Man TGS TT 01 Type E Truck Build Part 1 Unboxing
• Tamiya Team Hahn Racin...
Hobbywing V10 G4 21.5T data Analyzer and how it compares on paper to Trinity Xfactor Turnigy
• Hobbywing V10 G4 21.5T...
MyLaps RC4 Hybrid AIT10R078
AKA CA Glue
Hobbywig Electronics
Tekin
Castle Creations
Team Powers
Gens Ace
Gorilla Tape
JConcepts CA Glue
MIP Tools (Drivers)
Kobalt Pliers
Craftsman Pliers
Craftsman wrench
Tamiya Paint (PS-X)
Duratrax Paint by Horizon Hobbies
Savox Servo
Team Powers Servo
Traxxas Servo (for non-demanding applications)
Proline Bodies
Proline Tires
JConcepts Bodies
DE Wheels
WD-40
Yokomo Touring Tires
Team Powers Touring Tires
Dremel 4000
Пікірлер: 14
The video is here! I hope you get 1 million views
@telecomandorc
6 ай бұрын
It was our conversation on the other video that motivated me to just open this one up and unwind it. So, thank you. 😁
I salute to the motor that sacrificed itself for science. o7
@telecomandorc
6 ай бұрын
Salut✋😃.
Thank for the info. Very helpful.
@telecomandorc
21 күн бұрын
My pleasure. 🤝
great video and information
@telecomandorc
6 ай бұрын
🤝 Thank you. I was originally just looking into pulling the rotor out and doing a gauss reading. Then I cracked the board and figures, why not just open it up?
You think it is even possible to open it and replace the bearings with ceramic and put it back together?
@telecomandorc
5 ай бұрын
I do not think it is worth it. If you have special machines, maybe. But not with normal tool. Too many parts are pressed in.
In your opinion, could this handle 3s if you decided to put a 3s esc wkth it?
@telecomandorc
2 ай бұрын
I do not think the esc can handle it. The motor could with the right gearing. In the Slash manual on page 7 of the manual it says 6 or 7 cell NiMH or 2s Lipo. I may have missed a section but I do not think this one can handle it.
@gone.fishin9039
2 ай бұрын
@@telecomandorc i was just referring to the motor. But with a 3s esc.
@telecomandorc
2 ай бұрын
@@gone.fishin9039 I am sure it will.