You were born to teach people how to do things. Great explanations and great job!

@mattwei8421

6 жыл бұрын

: ）

The instruction is nice and clean. Simplicity makes a life easier.

I don’t know what you tAlk’n about, that was my training video, I start work this Monday and I didn’t have a clue how to operate the bloody thing until now✅🤩🇺🇸.. .. thanks, you just certified me😂😂😎

Very clear and simply define basic instructions. Very helpful

Excellent, simple and clear recommendations, easy to understand!!

@raymondharlall

6 жыл бұрын

Ivan Echevarria thanks for taking the time to comment 👌🚨

Thank you for the run down , I had my heights training and training for the ESP and tomorrow I am practicing driving the darn thing and on the 21 am being tested for my license for it. So I may watch this couple more times. It would been cool if you did the circle check before operating it. But thanks

i use one of those lifts everyday hanging pipe in a parking garage, we get garbage rentals, that dont work very well, but its much better than working off a ladder

thank you for the lesson and information.

@raymondharlall

8 жыл бұрын

+Johnny Westbrook you are welcome. thank you for following all my videos

hi, nice vídeo man thanks for the info. i have one question. what could happen if you are lifted and you get an oil leak or a power failure? would it gently come down or would it smash to the ground?

very good~~

fall protection is required even at ground level when moving the scissor lift. Railings mean nothing if it is tipping over. You may not like it but thats the law. Section 85 of the Regulation for Industrial Establishments (Reg. 851) When a worker is in an elevated work platform (such as a scissor lift) that is more than three metres above ground they must be protected from falling. Assuming the lift is secured from moving, then the guard rails of the lift would prevent the worker from falling. However, when the lift is moving there is a risk that a worker could be ejected regardless of the height of the guard rail, and thus needs to be protected from falling. The employer should require workers wear fall protection as a reasonable precaution to protect the worker from a hazard, as per clause 25(2)(h) of the OHSA. In addition, it would be expected that employers are aware of and observing the manufacturer’s instructions for the scissor lift, which could include a worker wearing fall protection.

@raymondharlall

6 жыл бұрын

Frank Visscher thanks you very much for sharing 👌

@dman2188

6 жыл бұрын

Railings mean nothing if its tipping over and so does wearing a harness .. that's why people in charge of safety have reputations as idiots sometimes .. because they use the law to justify why we should do something and not common sense

@stevepatenaude8976

5 жыл бұрын

The manufacturer and OHSA state that while in motion you must be tied off

Hi Raymond, There is a cushion valve in the hydraulic wheel drive. I want to understand how it functions.

@raymondharlall

6 жыл бұрын

J&G Work Formula I am not familiar with the Machanic’s

Don’t worry about him please he is from any where is ok 👍🏼

I want catalog of electric control ,please

Pretty good video but I was surprised to hear that 3 meters is 9 feet.

great video for an amateur

@raymondharlall

6 жыл бұрын

Quang Nguyen thank u!

Dear trainor. I hope you are doing well. I appreciate the training. In my country there is no kind of this machine but i see that we need it very much. Should you send me the bill to buy it from your country to Bujumbura? Thank u.

Great video also what nike shoes are you wearing they look comfortable thanks

@raymondharlall

5 жыл бұрын

its custom

@luxurycarkey7207

5 жыл бұрын

@@raymondharlallhow are they custom

Pat on the back for that

@raymondharlall

5 жыл бұрын

thank you!

thanks

@raymondharlall

6 жыл бұрын

thank you for watching and commenting

The only thing I heard was the information about the height requirements when fall protection is required. OSHA actually considers a scissor lift to fall under the scaffolding category. You do not have to wear fall protection as long as the guard rails are adequate.

@nathanrayburn4659

7 жыл бұрын

Anyway you can tell me where it says that so I can show my safety coordinator

@Phongtech

7 жыл бұрын

www.oshatraining.com/Fall-Protection-Requirements-for-Aerial-Lifts.php explains why you don't need a harness

@vjfjv

7 жыл бұрын

fall protection is required even at ground level when moving the scissor lift. Railings mean nothing if it is tipping over. You may not like it but thats the law. Section 85 of the Regulation for Industrial Establishments (Reg. 851) When a worker is in an elevated work platform (such as a scissor lift) that is more than three metres above ground they must be protected from falling. Assuming the lift is secured from moving, then the guard rails of the lift would prevent the worker from falling. However, when the lift is moving there is a risk that a worker could be ejected regardless of the height of the guard rail, and thus needs to be protected from falling. The employer should require workers wear fall protection as a reasonable precaution to protect the worker from a hazard, as per clause 25(2)(h) of the OHSA. In addition, it would be expected that employers are aware of and observing the manufacturer’s instructions for the scissor lift, which could include a worker wearing fall protection.

@jimmycrayton9254

7 жыл бұрын

Samantha Mangan l

@raymondharlall

6 жыл бұрын

Frank Visscher thank you for your valuable input sir.

Don’t worry wherever he from. Any way he is a. Normal person.

how you drive a forklift

It actually says 6ft

easy use do u show us corrective default.

Please come and see our machine.

@raymondharlall

6 жыл бұрын

william wei thanks would love to 😃

Personally I wouldn’t want to wear a harness because if it tips over, you just built a human catapult and you will probably get squished.. that’s just me though.

@raymondharlall

2 жыл бұрын

thank you for you comment. I really appreciate you. Be sure to support my channel by Subscribing :) Raymond

spare part stock .

Fuck a harness if I die , I die

schematic diagram for scissor lift power and control circuit plz

@raymondharlall

2 жыл бұрын

thank you for you comment. I really appreciate you. Be sure to support my channel by SUBSCRIBING :) Raymond

So why put on the lever if it will do nothing for you? also the strap needs to be by your pecs.

@raymondharlall

2 жыл бұрын

thank you for you comment. I really appreciate you. Be sure to support my channel by SUBSCRIBING :) Raymond

You’re all talk pal No elevation, Irwin is on a course tomorrow and you’ve been no help whatsover. Thanks for nothing!!