SKMEI 1335 Markings Removal Mod

This video is markings removal tutorial on SKMEI 1335. My apologies for the results.
Specs of the watch on my other video
link • SKMEI 1335 Review

Пікірлер: 28

  • @TSC369
    @TSC3694 жыл бұрын

    I did it with my wife's nail polish remover! It didn't take much time.

  • @tee_m
    @tee_m3 жыл бұрын

    My black version of the 1335's light blueish markings came off very easily with just Isopropyl Alcohol. No damage to finish at all.

  • @natanvance
    @natanvance5 жыл бұрын

    I've heard good results can be obtained by using Goo-Gone or Rubbing alcohol, but with the painted case it's always gonna be tricky just to remove the markings and not the case paint. Cheers!

  • @watchjunkie1251

    @watchjunkie1251

    5 жыл бұрын

    Yeah, I messed up the pint on the gold one, unfortunate for me I didn't have a Goo-Gone available during the filming. I also changed the strap on the black one, I used an after-market AE1000 strap, its 20mm wide. As for my AE1200, I will retain it as "stock". I will upload a review of a SKMEI 1220 tomorrow. You may want to check it out. It's an ana-digi watch, a homage of the Casio AQ320. Cheers!

  • @natanvance

    @natanvance

    5 жыл бұрын

    @@watchjunkie1251 I think no matter what product you use it's always gonna be tricky since it's two painted layers, so in that regard you did good with the WD40. Personally, I try to avoid plastic watch cases with metal paint because sooner or late the paint is gonna come off. I liked the silver version 1335 but ordered the black one because of that. Haha, excellent! I did order the Skmei 1220 (silver version) also, so I'm checking your review for sure! Cheers!

  • @MikeStrafaci

    @MikeStrafaci

    4 жыл бұрын

    Watch Junkie On the website it says it's 18mm is this incorrect? Just ordered the watch and a band on Amazon smh..

  • @wolfymaceastern6072
    @wolfymaceastern6072Ай бұрын

    Can you swap the cases from the skmei to the Casio module

  • @Lorne97
    @Lorne974 жыл бұрын

    Is it possible to use a Skmei strap on a Casio royale? I'd like to have a black Casio ae1200 with a black steel strap instead of the classic resin one

  • @watchjunkie1251

    @watchjunkie1251

    4 жыл бұрын

    Yes, you can. Ae1200 and this Skmei have same 18mm lug width, you can interchange them.

  • @Tim2pointoh

    @Tim2pointoh

    3 жыл бұрын

    I did this - kzread.info/dash/bejne/gISi17WjYrPbqaQ.html

  • @Tim2pointoh

    @Tim2pointoh

    3 жыл бұрын

    yup here you go - kzread.info/dash/bejne/paSnz8aMgMfem9o.html

  • @brandonlanois1734
    @brandonlanois1734 Жыл бұрын

    Can I use the same method to remove black markings from skmei 1456?

  • @Bergwacht
    @Bergwacht4 жыл бұрын

    did anyone knows how take the links off? its to large for me and i cant find splints to press out...

  • @watchjunkie1251

    @watchjunkie1251

    4 жыл бұрын

    Hi there. To adjust the bracelet, its very similar to that of adjusting a casio bracelet. Quite hard to explain in words but Mark from Long Island Watch have a video on how to. Here’s the link: kzread.info/dash/bejne/dKCnmLGhh7Gye6Q.html Hope this one helps.

  • @karlmagtubo7369
    @karlmagtubo73694 жыл бұрын

    Oi mate, you still have that watch? Just wanna ask if the gold on that watch fades? Thanks!

  • @watchjunkie1251

    @watchjunkie1251

    4 жыл бұрын

    Yes I still have both and neither has shown any signs of fading. Cheers!

  • @karlmagtubo7369

    @karlmagtubo7369

    4 жыл бұрын

    @@watchjunkie1251 nice, imma pick this up. Btw nice video!

  • @watchjunkie1251

    @watchjunkie1251

    4 жыл бұрын

    Karl Magtubo great! For the price, there’s not much guilt involve getting one of these and its a good beater watch that’s half the price of its counterpart AE1200. Enjoy bro! Cheers!

  • @karlmagtubo7369

    @karlmagtubo7369

    4 жыл бұрын

    @@watchjunkie1251 thanks! Have a good one and Keep safe! Regards from the Philippines 🇵🇭

  • @watchjunkie1251

    @watchjunkie1251

    4 жыл бұрын

    Karl Magtubo You too bro! Thanks! 🇲🇨🇵🇭

  • @andr1768
    @andr17685 жыл бұрын

    How to remove the marking on the inner?

  • @watchjunkie1251

    @watchjunkie1251

    5 жыл бұрын

    Have to access the inside by removing 4 screws on the back plate and remove the module. I used WD40 to remove the markings. You can also use rubbing alcohol, acetone, or a googone. Hope it helps.

  • @andr1768

    @andr1768

    5 жыл бұрын

    @@watchjunkie1251 thanks dude

  • @brainegg
    @brainegg3 ай бұрын

    I just use a soft eraser: kzread.info/dash/bejne/ZoWtw5d9Z5jJg8Y.html

  • @Xox66666
    @Xox666664 жыл бұрын

    please you hold it on, dont move it

  • @sultanqasim7639
    @sultanqasim76396 ай бұрын

    I don’t mind watch branding at all but that Skmei logo is particularly ugly. I just can’t stand it. I’d rather it be completely logo less if possible and with a Skmei. Hopefully they change their branding.

  • @sirgigachad1894
    @sirgigachad18944 жыл бұрын

    No need to remove the markings just remove the watch not enough the copyed casio but skemi over all it crap one of the worst watch company's ever

  • @watchjunkie1251

    @watchjunkie1251

    4 жыл бұрын

    Sorry to hear you have some dismay on Skmei brand. I mean c’mon, its under $10, cant expect much with that price. As for functionality, it’s pretty standard, it function as its suppose to... tell time. These watches are long gone from my possession, I already gave it away. Have a great day!