Hi everyone. I'm show you how to clean the bobbin case inside and to remove. If you have any questions leave a comment. Thank you and have a nice day.
Жүктеу.....
Пікірлер: 44
@tahirahbelle11 Жыл бұрын
Thank you for this video!! I inherited a Singer 401 years ago and still adore it to this day. Today I used your video to clean the bobbin case. Sept 2022 xx
@peggycagle466 Жыл бұрын
Thank you so much. This is a very helpful easily understood video. I was able to pause and start without getting lost in the instructions you were giving. You were very straight and to the point. I have been afraid to remove my case because of the screws. Thank you again
@user-bf8ek2rx5m Жыл бұрын
Thank you soooo very much for your video1 You helped me successfully clean the bobbin case and more importantly put it back together! You gave me happy sewing.
@kevinmonceaux2101 Жыл бұрын
I have a 401A I picked up at a thrift store I've been resolving some issues on, like a frozen gummed up stitch selector assembly. I hadn't attempted to do anything with the bobbin case, until now. This video and another video made it easy. It probably makes cleaning easier, but one doesn't actually have to remove the needle and/or presser foot to remove the throat plate. If one raises the presser foot and rotates the hand wheel until the take up lever is at its lowest point, then moves the throat plate position lever to unlock, the throat plate should slide out easily.
@zoeskaggs7386 жыл бұрын
That was so helpful!!! I didn't need to clean it, I just needed to figure out how to put the bobbin thingie back in. THANK YOU SO MUCH!!!
@annaklopack3 жыл бұрын
SOOOOO helpful thank you!! I thought I broke my machine after using the wrong bobbin and started to panic! You were very helpful in your explanation!
@dig59034 жыл бұрын
Thank you so much for this! I have just acquired a 401A with about a mile of thread and years of lint stuck under the bobbin case, and was wondering how to remove the case to clear it all out and clean it. Had no idea it was so easy to remove - thank you again. I'll be right onto it tomorrow!
@pamelahalstead60613 жыл бұрын
Thank you! Somehow it came un seated and I was able to fix it with your video!
@tranquildoe Жыл бұрын
Thank you so much! I was trying to move it to the right first, as I lifted. It wasn't budging. Lift, then move to the right!
@pghhockeymom14 жыл бұрын
Thank you so much. I didn't know about just lifting the assembly to the right of the bobbin to take it out. I was frantically searching for a tiny screwdriver. Didn't need it. Wonderful video.
@mariahoh13 Жыл бұрын
Thank you!!! I was having so much trouble with that bobbin casing
@GroupFitPro5 жыл бұрын
Thank you, thank you, thank you!!! I was going crazy trying to get the bobbin case back in the machine - your video was so helpful. I'm off sewing again!
@markofashion1790
5 жыл бұрын
Glad to help. Hope can sew again. Have a nice day.
@froby_flingit6 жыл бұрын
Thanks for this video, it just helped me clean up my bobbin area on my 401A
@markofashion1790
6 жыл бұрын
Thank you for watching my video. Hope understand if you need anything send message .
@jesseposada69862 жыл бұрын
Wow that looked easy enough to do. I have the Singer 401A with the cabinet included. I purchased it at the swap meet over 5 or more years ago. I have always wanted to clean, oil, grease and switch out the knee pedal for a foot pedal. I was cleaning it and wanted to know to remove the bobbin case in order to clean it. Thank you so much for posting this video.
@1953childstar
6 ай бұрын
All you need to do is slide the foot control out of the holder and you have the foot control...
@markofashion17904 жыл бұрын
Glad and happy learned how to put bobbin case back in. Thanks you all.
@abeforee47802 жыл бұрын
Ohh!! THIS IS AWESOME! Thank you!
@marthabeck3981 Жыл бұрын
Thank you!!! Valuable information
@HBStep5 жыл бұрын
Thank you. Very helpful.
@lisabartlett2784 жыл бұрын
I totally agree with GroupFitPro.. tried for 1/2 hour to get the crazy thing back in!!
@marksuttin71287 жыл бұрын
Mark you are awesome
@naisexquisitedesign5 жыл бұрын
Wow thank you so much
@fuzzzyyellow4 жыл бұрын
Great tip thank you!
@hannetjiedebeer94803 жыл бұрын
Great video, thank you so much. I received a Singer 401sewing machine as a gift after the computer of my Empisal Galaxy's of 35 years broke down. I was at my wits end as the diagrams in the manual for the 401 are not very clear. I still have a lot to learn. At the bottom of the Singer 401, there is an arm in the middle of the 3 arms that is hold in place by a bullet shaped screw from the left on the outside, what i the function of the arm and the screw? I unscrewed the screw, not knowing that it wasn't necessary. ( I cleaned and oiled the machine)I tightened it again, but I am a little cautious that if it was done incorrectly it may damage the machine.
@carlossanchez-pg5xx3 жыл бұрын
Perfecto....really helpfull.
@wingwong8883 жыл бұрын
Sweet! Thank you!
@markofashion1790
3 жыл бұрын
Very welcome ☺️ hope your sewing machine is happy.
@ayyamperumalr5 жыл бұрын
well explained to remove the bobbin case. is the BOBBIN CASE 172082 available in the online store?
@cammie44942 жыл бұрын
thank u so muchh omg
@shannonsimpson4853 жыл бұрын
Hi there - GREAT video! the part that needs to be pushed back to remove the bobbin case seems stiff - I’m not able to push it back - is there an area I need to grease or lubricate to assist in this process?
@1953childstar6 ай бұрын
That is a "early production" 1956 model… They were manufactured between 1956 and 1961 and one million were made..
@tinahunter1152 жыл бұрын
Thank you so much. Should we oil inside there before replacing the bobbin case?
@markofashion1790
2 жыл бұрын
Yes oiled before place the bobbin don't wanna get oil on thread.
@yolandaleamon1440 Жыл бұрын
I have a 404 Singer Slant Needle. The front plate came clear off and I cannot figure out how to slide it back in. Any ideas?
@heatherhamm2934 жыл бұрын
Hi .. im having a problem with that part of the machine i cant identify. when the needle comes down the thread is picked up but before it has a chance to go anywhere it binds up and breaks the thread ... no matter what the tension is set at. it doesnt seem to want to slide up and over the bobbin it ends up wrapped around the back of the piece this video shows being removed. the part the bobbin sits in. Any ideas or suggested videos??
@Peppermint1
Жыл бұрын
Start by replacing the needle even if it looks perfectly straight. If it still breaks the thread you may have a bent shuttle hook tip. Look up on KZread
@teenafree85864 жыл бұрын
I'm having a problem getting the case back in? It looks good but gets dislodged when I turn wheel
@markofashion1790
4 жыл бұрын
Make sure put in the right spot. Have you put some little oil by the bobbin case? See that work. Thx.
@kevinmonceaux2101
Жыл бұрын
I had the same problem. Just past the three minute mark in this video: www.KZread.com/watch?v=hmc9iISYci8 shows the details that helped me get mine back in.
@HBStep3 жыл бұрын
I lost my bobbin Case - can anyone tell me where I can order a replacement that will fit (model number would be great!)
@markofashion1790
3 жыл бұрын
Hello, easy to found they are very common similar to Singer 99 and 66 from 400-500 series Singer. Check on eBay or FB group sell those parts.
Пікірлер: 44
Thank you for this video!! I inherited a Singer 401 years ago and still adore it to this day. Today I used your video to clean the bobbin case. Sept 2022 xx
Thank you so much. This is a very helpful easily understood video. I was able to pause and start without getting lost in the instructions you were giving. You were very straight and to the point. I have been afraid to remove my case because of the screws. Thank you again
Thank you soooo very much for your video1 You helped me successfully clean the bobbin case and more importantly put it back together! You gave me happy sewing.
I have a 401A I picked up at a thrift store I've been resolving some issues on, like a frozen gummed up stitch selector assembly. I hadn't attempted to do anything with the bobbin case, until now. This video and another video made it easy. It probably makes cleaning easier, but one doesn't actually have to remove the needle and/or presser foot to remove the throat plate. If one raises the presser foot and rotates the hand wheel until the take up lever is at its lowest point, then moves the throat plate position lever to unlock, the throat plate should slide out easily.
That was so helpful!!! I didn't need to clean it, I just needed to figure out how to put the bobbin thingie back in. THANK YOU SO MUCH!!!
SOOOOO helpful thank you!! I thought I broke my machine after using the wrong bobbin and started to panic! You were very helpful in your explanation!
Thank you so much for this! I have just acquired a 401A with about a mile of thread and years of lint stuck under the bobbin case, and was wondering how to remove the case to clear it all out and clean it. Had no idea it was so easy to remove - thank you again. I'll be right onto it tomorrow!
Thank you! Somehow it came un seated and I was able to fix it with your video!
Thank you so much! I was trying to move it to the right first, as I lifted. It wasn't budging. Lift, then move to the right!
Thank you so much. I didn't know about just lifting the assembly to the right of the bobbin to take it out. I was frantically searching for a tiny screwdriver. Didn't need it. Wonderful video.
Thank you!!! I was having so much trouble with that bobbin casing
Thank you, thank you, thank you!!! I was going crazy trying to get the bobbin case back in the machine - your video was so helpful. I'm off sewing again!
@markofashion1790
5 жыл бұрын
Glad to help. Hope can sew again. Have a nice day.
Thanks for this video, it just helped me clean up my bobbin area on my 401A
@markofashion1790
6 жыл бұрын
Thank you for watching my video. Hope understand if you need anything send message .
Wow that looked easy enough to do. I have the Singer 401A with the cabinet included. I purchased it at the swap meet over 5 or more years ago. I have always wanted to clean, oil, grease and switch out the knee pedal for a foot pedal. I was cleaning it and wanted to know to remove the bobbin case in order to clean it. Thank you so much for posting this video.
@1953childstar
6 ай бұрын
All you need to do is slide the foot control out of the holder and you have the foot control...
Glad and happy learned how to put bobbin case back in. Thanks you all.
Ohh!! THIS IS AWESOME! Thank you!
Thank you!!! Valuable information
Thank you. Very helpful.
I totally agree with GroupFitPro.. tried for 1/2 hour to get the crazy thing back in!!
Mark you are awesome
Wow thank you so much
Great tip thank you!
Great video, thank you so much. I received a Singer 401sewing machine as a gift after the computer of my Empisal Galaxy's of 35 years broke down. I was at my wits end as the diagrams in the manual for the 401 are not very clear. I still have a lot to learn. At the bottom of the Singer 401, there is an arm in the middle of the 3 arms that is hold in place by a bullet shaped screw from the left on the outside, what i the function of the arm and the screw? I unscrewed the screw, not knowing that it wasn't necessary. ( I cleaned and oiled the machine)I tightened it again, but I am a little cautious that if it was done incorrectly it may damage the machine.
Perfecto....really helpfull.
Sweet! Thank you!
@markofashion1790
3 жыл бұрын
Very welcome ☺️ hope your sewing machine is happy.
well explained to remove the bobbin case. is the BOBBIN CASE 172082 available in the online store?
thank u so muchh omg
Hi there - GREAT video! the part that needs to be pushed back to remove the bobbin case seems stiff - I’m not able to push it back - is there an area I need to grease or lubricate to assist in this process?
That is a "early production" 1956 model… They were manufactured between 1956 and 1961 and one million were made..
Thank you so much. Should we oil inside there before replacing the bobbin case?
@markofashion1790
2 жыл бұрын
Yes oiled before place the bobbin don't wanna get oil on thread.
I have a 404 Singer Slant Needle. The front plate came clear off and I cannot figure out how to slide it back in. Any ideas?
Hi .. im having a problem with that part of the machine i cant identify. when the needle comes down the thread is picked up but before it has a chance to go anywhere it binds up and breaks the thread ... no matter what the tension is set at. it doesnt seem to want to slide up and over the bobbin it ends up wrapped around the back of the piece this video shows being removed. the part the bobbin sits in. Any ideas or suggested videos??
@Peppermint1
Жыл бұрын
Start by replacing the needle even if it looks perfectly straight. If it still breaks the thread you may have a bent shuttle hook tip. Look up on KZread
I'm having a problem getting the case back in? It looks good but gets dislodged when I turn wheel
@markofashion1790
4 жыл бұрын
Make sure put in the right spot. Have you put some little oil by the bobbin case? See that work. Thx.
@kevinmonceaux2101
Жыл бұрын
I had the same problem. Just past the three minute mark in this video: www.KZread.com/watch?v=hmc9iISYci8 shows the details that helped me get mine back in.
I lost my bobbin Case - can anyone tell me where I can order a replacement that will fit (model number would be great!)
@markofashion1790
3 жыл бұрын
Hello, easy to found they are very common similar to Singer 99 and 66 from 400-500 series Singer. Check on eBay or FB group sell those parts.
@HBStep
3 жыл бұрын
@@markofashion1790 Thank you!