I can't count how many times I've rewatched this before attempting my radio install! Amazing help!!

@JRMSweeps

Жыл бұрын

Thank you my friend. Hope the vid helped you out.

I ordered a radio and harness from Quadratec that was on backorder for three months. Finally gave up and cancelled and sourced parts myself. I thought I was ordering the complete plug and play harness from Crutchfield so you can imagine my little moment of panic when I saw what came out of the bag. Thank you for your video, you brought me back down to earth. I am an engineer and very familiar with assembly, but was not looking to cut into the vehicle harness, nor did I want to spend 3 hours in the freezing cold working on my daughters jeep.. I feel much better now. Thank you again.

@JRMSweeps

2 жыл бұрын

Very welcome. It seemed as if I researched for over a week and found just bits and pieces of here and there info on using this pac bus get up. Glad you were able to get it going and the video helped you out as well.

Thank you! Been through all through forums and this helped alot.

@JRMSweeps

4 жыл бұрын

Welcome welcome

Thanks bro been breaking my head about this blue box appreciate it.

@JRMSweeps

5 жыл бұрын

Yes sir...i think i researched myself over a dang week...

Your video helped me install ax5000 in my sahara. thanks.

@JRMSweeps

4 жыл бұрын

Very welcome glad it helped.

Thank you so much, this was a huge help!

@JRMSweeps

8 ай бұрын

welcome so much!

Your video help me connect my steering wheel function with my pac.thanks and keep up the great video coming

@JRMSweeps

5 жыл бұрын

Ty sir

I gotta tell you, friend, you're a lifesaver! It always amazes me how folks get on KZread and create content like this which has the ability to help out so many people. I wanted to tackle this job on my own but the moment I saw this spaghetti factory explode out of the box, I started thinking that I was in over my head! I am confident now, especially since I am already halfway done! Thank you very much, my friend!

@JRMSweeps

2 жыл бұрын

You are def my "somebody" my friend. Thank you for your kind words. I know you will get it finished and working 100%. I am so delighted this helped you out. Keep me posted when your finished!

@RumbleFish69

2 жыл бұрын

@@JRMSweeps Thank you, my friend! You are the best! I just finished and it is working great! Thank you again so much; I couldn't have dow it without your unbelievably incredible video! Worth the subscription!

@JRMSweeps

2 жыл бұрын

You made my Saturday friend 👍👍👍👍👍 that you accomplished your install with this vid. You rock my man, great job!

@RumbleFish69

2 жыл бұрын

@@JRMSweeps Thank you, sir, but I really couldn't have done it with you! I've had no music in my car for almost 2 weeks and now I have so much more! Much thanks and I'm sending you a big pandemic hug, my brother!

@JRMSweeps

2 жыл бұрын

Preciate it my man. Big ups for getting it sone. Very humble on my end. Much love.

Sir. Your my hero. Been looking for the answer to this since Xmas!! Thx so much!

@JRMSweeps

3 жыл бұрын

Very welcome lol. Took me forever to research this as well, good luck!

i appreciate this so much🤐

@JRMSweeps

4 жыл бұрын

Welcome!

Awesome 😂

@JRMSweeps

Жыл бұрын

thanks lol

Great video. It confirmed what I thought. I'm a bit concerned that the constant, switched, and ground wires on my alpine HU and Power pack wires are much thicker than the flimsy wires on this harness. I'm going to wire my HU to the harness and wire the Power pack separately since it'll be switched via the blue HU wire. Now to find the handbrake bypass video!

@JRMSweeps

3 жыл бұрын

I have a bypass vid on my channel as well. Ty for the comment. Pretty sure the PAC is made cheaply, thus the thin wires on it as well.

@klinkster1955

3 жыл бұрын

@@JRMSweeps I searched your channel and couldnt find it. I found another on youtube. You should copy the link into your video description on this post

@JRMSweeps

3 жыл бұрын

kzread.info/dash/bejne/l32VpLiTibHelaQ.html

Thanks for the great walk through of the wiring harness. Do you know if the reverse wiring should be the same with a Jeep Wrangler and a manual transmission. Thanks in advance.

@JRMSweeps

3 жыл бұрын

Thank you. As far as the same wiring, I am unsure about that unfortunately. If you pull the radio and see the same colored wires I have on the vid I did on the reverse bypass, then I would assume yes.

Thanks for the video helped a lot !!👍🏼 but how do I Connect the - navigation output -???

@JRMSweeps

4 жыл бұрын

Do u control nav from steering wheel? If so, i dont know. You will need a pac bus specific for your application.

Hello! this interface serves to impersonate another radio in the jeep?

@JRMSweeps

5 жыл бұрын

Needed for the steering controls

Have you ever done a diagram for this when using it with the chyrvd as well. I get how this works but I have another harness for the built in dvd (separate ) that ties into factory radio in town and country. Clutchfield says I need both but not sure how they wire together. And unfortunately no easy diagram like yours.

@JRMSweeps

4 жыл бұрын

No sir, there are so many darn applications it's crazy. Took me probably a week just to research and then about 5 hours to do the install with subs and amp. It was tiiiiiiime consuming with those stupid bus controllers and no doubt a little frustrating. The main thing is getting all the accessories to work and wired up. Wiring up the factory speakers and subs is easy as long as u follow ur manual diagram u have with ur units. Wish I could be more of help other than this video my man.

If I were not getting the signal from the CAN-bus to the head unit, would I change setting (I went with 7/other for Benize head unit)?

@JRMSweeps

3 жыл бұрын

I am not sure tbh

Did you ever make a second video of bypassing the parking break wire ?

@JRMSweeps

3 жыл бұрын

Yes i did. Just search my channel for it. Let me know if you cant find it.

if you do not have the volume control buttons, do you still need this to do an aftermarket head unit install?

@JRMSweeps

4 жыл бұрын

Probably not, im pretty sure this is the module that works in conjunction with the steering wheel controls. Worst case scenario would be not to buy it, hook urs up, and then if it doesnt work buy it.

Great video. The problem I'm having is after I install my stereo everything works but if my 2016 Jeep Patriot sits for a day it drains the battery. I've rewired twice and can't figure out where the draw is coming from.

@JRMSweeps

Жыл бұрын

Any lights left on? Not a coincidence that u might have a bad battery all of a sudden? Take it to autozone and have them test the battery if u dont have a load tester. Maybe a constant on was wired where it bypassed the ignition off???

When I install this unit will the factory Bluetooth mic still work or do I have to use the one provided by pioneer? thank you

@JRMSweeps

5 жыл бұрын

Factory should still work

Thanks for this video. What is the wire that comes off the PAC harness by the black plug? I had to remove my head unit due to water damage and when I did I saw a black wire that was hanging by itself. I don't know what it was hooked up to but wondering if it was this pac harness wire.

@JRMSweeps

5 жыл бұрын

Black is usually ground wire...not sure if there are 2 black ones tbh...

@tdz69

5 жыл бұрын

Thanks. It’s a ground.

@JRMSweeps

5 жыл бұрын

Awesome deal!

I’ve hooked up this harness system to a dodge nitro and finally got it all right but with Bluetooth calls you can’t hear the calls through radio. Do you have any clue about that? Does this harness system have a built in micro bypass? Or does that still need to be hooked up separately?

@JRMSweeps

4 жыл бұрын

If you have uconnect i can tell u that i have experienced nothing but trouble with my bluetooth ad well on an upgraded touch screen system i installed as well. My bluetooth is rendered useless now for calls. So, to answer ur question, im clueless tbh.

What do you do with the loose wire next to the piece that plugs into the back....is that a ground wire?... Looks like it says hook up to on pg 3?

@JRMSweeps

3 жыл бұрын

Ground is explained in the vid.

Hey man need some help , installing a pioneer 5200nex on a jeep wrangler with the pac rp4ch11 , i have 4 wires on the pioneer harnessthat i dont know if i need to plug, purple/white, blue/white, pink, light green(long) , my jeep has rhe base audio system so has no amp and i will not be putting a amp or rear camera just want my headu it to work with gps

@JRMSweeps

5 жыл бұрын

Some of the wires that I mention in the vid u will not hook up...i simply capped them off at the ends when i did my install for the ones i didn't use...

what about if my new HU does not have the female plug for SWC.... the blue w white stripe wire next to it, what's it for?

@JRMSweeps

3 жыл бұрын

They make an adaptor that you can wire in to the unit as opposed to using rca cables.

Where does the navigation system wires go? And there is a blue and yellow wire connected to like an aux cable that goes into the back of the radio...where do those wires go?

@JRMSweeps

3 жыл бұрын

You may not use all the wires. If it wasnt explained in the vid, then I have no clue unfortunately. Not sure if nav plugs into the PAC module.

What is the purple colored wire coming off the steering wheel 3.5mm plug? Where does that connect up?

@JRMSweeps

3 жыл бұрын

Not sure tbh, been awhile

Quick question. Just bought a Boss audio with back up camera. Will this work for it? Any other things I need to know?

@JRMSweeps

5 жыл бұрын

If you have steering wheel controls and want to use them then u need a controller like this...

Where does the blue wire hook to that's connected to the steering wheel aux cable that goes to the steering wheel control module?

@JRMSweeps

11 ай бұрын

I am not sure tbh. I know that I didn't use all my wires.

Hi all. Does anyone know if this model interface will work on 2013 dodge journey sxt?

@oreldawson5183

5 жыл бұрын

I got a 2013 dodge avenger and the folks at best buy had me get this model

Need something for a 2015 wrangler with alpine factory system. Cant get the factory amp to turn on. Using a saicane android 12.1 head unit. Any ideas on what module I need

@JRMSweeps

Жыл бұрын

Is it the 9 speaker factory installed system? If so, did the amp burn up, wire bad to the amp, blew a fuse?

Mine has two yellow and two black one by itself and on runs into module side so do I just splice then all together with radio harness

@JRMSweeps

5 жыл бұрын

U would have to follow ur radio diagram i guess...

@jimdorf8656

4 жыл бұрын

I have the same question right now, what did you end up doing? Thanks

Where does the blue and yellow wire connect to ? The wire that hooked up to the steering wheel connection?

@JRMSweeps

2 жыл бұрын

Depends on your setup. I did not use all the wires when I did this install. It could be for back up cameras, navigation, etc, that you have as accessories for your vehicle.

So if i am connecting an amp to the radio blue/white, does that mean the pac blue and blue/white will be left unconnected?

@JRMSweeps

6 жыл бұрын

No they will both connect to it.

@tonyhamre61

3 жыл бұрын

Hey gents, want to pigging back off this question. 2011 Jeep Liberty, factory system with the rear sub, I should not need the blue/white wire correct? Currently with the aftermarket radio hooked up, I have absolutely no sound out of the speakers. Not even static noise from radio. I’m wondering if that if both blue/white wires need to be connect to power the speakers and amp?

do you by any chance know what Ill connect the BLUE wire (instead of the plug that controls the steering wheel controls ) to my Kenwood Radio? because I know kenwood doesnt use the plug, it uses that blue wire, just dont know which one to connect it to? thanks

@JRMSweeps

5 жыл бұрын

Solid blue or blue and white? Amp turn on?

@oreldawson5183

5 жыл бұрын

@@JRMSweeps I know this is months old, but I think he was referring to the blue/yellow wire that runs with the SWC jack. Some heads use a blue/ yellow wire, some use the jack. They serve the same purpose. Look for a SWC port on the back of the deck OR for a blue/yellow wire on the deck harness.

@JRMSweeps

5 жыл бұрын

Not sure on my end. All i know is the application for a Jeep Wrangler and this Pac

So mine has been working good for a little while then I came to a problem with the hot wire from the interface is making the lighting bolt come on when I touch it with a 12v and it’s draining my battery what do you think is the problem?

@JRMSweeps

Жыл бұрын

Bad battery?

@ImMontreal

Жыл бұрын

@@JRMSweeps okay thanks I will go check to see if it’s bad

where dose the blue and yellow wire go that is next to the 3.5mm jack on the pac??

@JRMSweeps

3 ай бұрын

If it isn't in the vid, I am not sure. I didn't use all the wires with my setup.

Do you need the module if you do not have steering wheel controls?

@JRMSweeps

4 жыл бұрын

You shouldn't no.

Have a 08 Jeep commander sport base model, will it run all 6 speakers?

@JRMSweeps

4 жыл бұрын

Download the manual and see what each wite goes to speaker wise.

Help! Cannot figure out how to wire up my Boss BE7ACP using the RP4-CH11

@JRMSweeps

2 жыл бұрын

Can you be more specific?

I have a 2007 3.5L dodge charger and im not sure if i need one of these to install and aftermarket stereo. I do not have any steering wheel controls.

@JRMSweeps

4 жыл бұрын

Then u shouldn't.

@monstermeyhem4555

4 жыл бұрын

@@JRMSweeps thanks

@JRMSweeps

4 жыл бұрын

Welcome

And if the Jeep does not have steering wheel controls or an SWC port on the back?

@JRMSweeps

3 жыл бұрын

Prob dont need the pac bus. Wire it like an old school unit.

hopw to connect the 0:44 cable to a newer android radio, thez dont come with that one...

@JRMSweeps

4 жыл бұрын

None of those did, u have to buy the pac controller etc separate.

Hi Hope you doing well, does this work for a Jeep Commander 2007 ?

@JRMSweeps

4 жыл бұрын

Not sure tbh. Prob need a pac that is vehicle specific. Do u have steering wheel controls for ur radio?

I have a similar radio (MVH-1400NEX) and my 2011 JKU came with a stock sub. For some reason, the rear speakers and sub are connected and the head unit does not recognize the sub as a sub. Any ideas on how I can go about fixing this?

@JRMSweeps

3 жыл бұрын

Does your sub have an amp to it? Most subs wired to amps run through rca cables to the unit.

@kubesh

3 жыл бұрын

@@JRMSweeps yes. Just the stock one.

@JRMSweeps

3 жыл бұрын

Stock amp from jeep?

@kubesh

3 жыл бұрын

@@JRMSweeps yes

@JRMSweeps

3 жыл бұрын

No clue tbh. My 9 speaker alpine system, I used an oem hard rock edition touch screen from a jeep and everything was plug and play. Seems as if maybe the amp isnt turning on???

What about the blue wire that's connected to the steering wheel harness?

@JRMSweeps

4 жыл бұрын

Not sure what you mean tbh.

@Zooonoo

4 жыл бұрын

@@JRMSweeps at around 41-42 seconds into the video. when you show the little harness that goes into the module and the 3.5mm like jack that goes to the back of the head unit. There's another blue wire that's not hooked up to anything. images.crutchfieldonline.com/ImageHandler/trim/620/378/products/2013/28/541/g541RP4CH11-F.jpg In that picture from Crutchfield the harness on the bottom with the blue wire

Hey I don’t have the 3mm in the back of my radio, what should I wire it to?

@JRMSweeps

4 жыл бұрын

Man i have no clue what ur talkin bout lol

@monstermeyhem4555

4 жыл бұрын

U cant wire it to anything. The radio itself should still work without that but ur steering wheel controls wont work anymore

Thank you so much ... Been racking brain over put double din in charge .. I guess I need to get the one with jack cause the radio in getting has the input for the swc .. any advice would be greatly appreciated ... Great Video

@JRMSweeps

3 жыл бұрын

What u mean? Not sure tbh.

@crimzonr9371

3 жыл бұрын

@@JRMSweeps Sorry should of explained better ... 06 Charger i got came with a aftermarket radio ... I am installing a double din that has a 3.5 mm jacket on it for swc ... When I pulled the dash apart the radio that came with car had the PAC C2R-CHY4 installed .. but sound was only coming out of front speakers and swc don't work .... I know the adapter is two channel so not sure if they hooked it up rite ... Not sure how to correct ... I can send you pics if you like .. I appreciate your help

@JRMSweeps

3 жыл бұрын

Is the amp getting power? Assuming swc is sub woofer channel, sorry im not a pro at this tbh. Shoot me some pics jrmsweeps@outlook.com.

@crimzonr9371

3 жыл бұрын

@@JRMSweeps swc was my short for steering wheel control but the amp is getting power .. Thank you .. will do.. dark rite now so I'll try and get some tomorrow .. I'll send pics of how the inside looked when I took the console apart

@JRMSweeps

3 жыл бұрын

I know this pac bus crap is annoying as all get out.

I have this same set up. I have an 07 jku it doesnt have a mic. I want to add a mic. Where do I connect it?

@JRMSweeps

4 жыл бұрын

You can buy an aftermarket touch screen like a pioneer that comes with a miC and it'll work then in conjunction with ur speakers.

@docsduggie

4 жыл бұрын

@@JRMSweeps I do have an aftermarket radio kenwood, when I bought it it didnt come with a mic. It does have bluetooth , but I want to know what wires to use to connect a mic.

what about the blue and yellow where does it connect to?

@JRMSweeps

4 жыл бұрын

Depends on ur accessories u have idk

do you know how to use that harness with the factory premium sound/ an amp and sub? It is a little different. No speaker wire hookups

@JRMSweeps

5 жыл бұрын

U would prob have to cut into the factory harness

@JRMSweeps

5 жыл бұрын

For an amp u need a a 2 channel add on adaptor

@adidas4275

5 жыл бұрын

I got it, just hooked it up but it only takes the rear speaker level inputs.... so that means no fading :/ now I am trying to get the OEM reverse camera to work. :D

@JRMSweeps

5 жыл бұрын

Not sure but u might be able to buy an inline fade device...

@supersportimpalass

5 жыл бұрын

@@adidas4275 I just bought a Pioneer receiver and have the premier Infinity system in my Wrangler. I'm assuming the aftermarket stereo has a better amp so I plan to completely bypass the factory amp which is located under the steering column. I'm still using the PAC harness to keep the chimes and radio dimming. Future upgrade would then be to use the preamp outputs to a separate amp connected to the factory speaker wires which was connected to the Inifinity amp.

Hey bro my Jeep has a stock infinity system will this bypass the amp ?

@JRMSweeps

3 жыл бұрын

Do the Jeeps come with stock infinity systems now? Thought the head units were mopar?

I am having an issue where the radio supposedly has steering wheel control but there is no 1/8" trs socket on the back of the radio, just a blue wire,

@JRMSweeps

4 жыл бұрын

What do u need trs sockets for?

@Centrifugalsparks

4 жыл бұрын

@@JRMSweeps to plug in the 1/8" plug into

@JRMSweeps

4 жыл бұрын

No clue, never used them. You could see if they make an adaptor of sorts that wires into the control box.

Hi Will it work with a Kenwood radio I have got a Chrysler grand voyager same as town and country with amp 2007 thanks. Jeff in uk

@JRMSweeps

6 жыл бұрын

Not sure tbh

@jeffmee763

6 жыл бұрын

let's hope lots of us in uk looking for a good setup let me know I will but it on the Chrysler forum in uk. Jeff

Which wire from the navigation gives me reverse signal?

@JRMSweeps

10 ай бұрын

I am not sure, sorry.

May be a dumb question but how do you connect the wires?

@JRMSweeps

2 жыл бұрын

You can simply twist them and wrap with electrical tape, use wire connections, shrink tubing...

anyone know why I can’t hear people calling but they can hear me? 2012 Jeep Wrangler with this harness and rad pro 4

@JRMSweeps

4 жыл бұрын

cuz jeeps fn suck that is why. so glad i sold mine, what a pos.

So I have a 2015 Jeep Wrangler. I installed everything but there is no sound coming from my speaker. I have this same harness and CAN bus. There is a blue and blue/white wire left on the CAN bus that isn’t connected and on the power cord to the radio there is just a solid blue wire left. Do these need to be connected? I’ve been trying to get this to work for like three days. I’m lost! 😂😂

@JRMSweeps

3 жыл бұрын

Couple of ?s. Are u getting any sound to the factory speakers? Did u hook up an amp with subs?

@JRMSweeps

3 жыл бұрын

Did u not watch the vid for the wire color explanations 🤣

@ChelseyLynnn

3 жыл бұрын

@@JRMSweeps I watched the whole video I connected all the wires correctly. White/black to white/black etc etc.. I have a blue ANT wire left on the plug that goes into my radio and a solid blue and blue/white coming out of the CAN bus.

@ChelseyLynnn

3 жыл бұрын

There is no blue/white wire on the aftermarket radio plug

@ChelseyLynnn

3 жыл бұрын

I’m new to all of this wanted to see if I could do it myself. There is no sound at all but the amp turn on wire isn’t hooked up yet because idk what to hook it up to.

What if my radio doesn't have a slot for the SWC

@JRMSweeps

Жыл бұрын

SWC?

I have a Jeep Wrangler 2012 with a factory amp and would like to retain my steering control. What is the difference between this one and RP4-CH11?

@JRMSweeps

3 жыл бұрын

This is the rp4 ch11.

@cmlegend88

3 жыл бұрын

@@JRMSweeps sorry I meant PAC C2R-CHY4

@cmlegend88

3 жыл бұрын

@@JRMSweeps Oh and thanks for the video... its very helpful. I just bought an Atoto radio unit and will hook it up to my Jeep very soon

@JRMSweeps

3 жыл бұрын

Pretty sure its application to the vehicle.

@JRMSweeps

3 жыл бұрын

Very welcome. Took me forever to do research and do this vid so I hope it helps you out.

Hello i have a question i have two yellow wires ! Both have 12 volts constantly

@JRMSweeps

4 жыл бұрын

Sorry i have no clue

@jimdorf8656

4 жыл бұрын

Did you figure this out? Exactly the question I have right now. Two yellows and two blacks

@JRMSweeps

4 жыл бұрын

If the yellow are 12v continuous then wire them together. Black ground?

@jimdorf8656

4 жыл бұрын

@@JRMSweeps yes, 2 black grounds

@JRMSweeps

4 жыл бұрын

Put the 2 black ground wires together and wire to the wiring harnes ground.

I recently replaced the radio in my wife's JK with a SONY w/back up camera, I purchased the installation kit with the U-Connect module - everything worked great for about 2 weeks and then it started randomly shutting off and coming right back on - then it started effecting the Jeep i.e. while driving the gauges would go to -0- the wipers would come on for one pass, a/c would cycle off and back on... the radio died so I assumed it was a defective unit so I painfully purchased the newer version (because, like a dumbass I tossed out the box and receipt AND the original stock radio). So now its 2-3 weeks later and the new radio is starting to do the same thing... I would surmise it has to be a power issue? I did not alter or change the wiring, I HAVE checked all the connections and I DID NOT add any speakers of sub. Thanks for any advice!

@JRMSweeps

Жыл бұрын

Have you checked the negative terminal on the battery for a good ground? Outside of that, I can tell you that is about 5 levels above my paygrade. I am not great at all with wiring issues like that and unfortunately I have not heard of this issue as well. I would give your local dealership a call and see if anyone in the service dept. who isn't a punk will talk to you about it and see what they say. When you say U-connect module, I assume that is the pac-bus to operate the stereo from the steering wheel? Could the u-connect module be causing the problem? If the stock head unit gave you no problems, I would say it has something to do with the module or the way the new system was wired up. I gathered this from a website which stated certain functions and features of the audio system rely upon resources shared with other electronic modules in the vehicle over the Programmable Communication Interface (PCI) bus network. Worst case situation, take it to a reputable stereo shop and have them check the problem. Sorry if I am of no help. Maybe someone will jump on this thread and give you some better advice. Please let us know your fix when you find it. You have me curious about it now.

@fljeeper71

Жыл бұрын

@@JRMSweeps I will let you know what I find out, for now I pulled the fuse and the rest of the Jeep has been operating as normal.. guessing it’s a ground issue. Going to swing by a parts store and have the battery and alternator checked.

@JRMSweeps

Жыл бұрын

@@fljeeper71 good call on the alternator as well...def keep us posted!

@fljeeper71

Жыл бұрын

Had the alternator and battery checked.. alternator was good battery was in the bottom of the acceptable range.. got a new one and cleaned up the cables.. so far the radio and Jeep are working fine.

@JRMSweeps

Жыл бұрын

Awesome. I hope that takes care of the issue for you. Please let us know in a couple of weeks if this was the fix for good.

How do you connect the wires if you have a built-in amplifier?

@JRMSweeps

2 жыл бұрын

Not sure tbh

@JRMSweeps

2 жыл бұрын

Would think it's pretty similar.

@travelingmacco

2 жыл бұрын

I installed it the way you did and the phone calls don't work. I read the instructions and it said if I have an amp, I should not install the rear speakers

@JRMSweeps

2 жыл бұрын

My phone didint work either all the time. Must be a glitch in the system.

@travelingmacco

2 жыл бұрын

I figured it out. If you have a built in amp you connect the front speakers of the new stereo to the rear speakers of the module. The amp controls the left and right. The rear speakers of the new stereo are not used.

How does OEM satellite radio factor into this typically?

@meStevo

2 жыл бұрын

For context, wife installed a 'sirius ready' radio at Best Buy... a Kenwood that doesn't have a built-in tuner. Trying to figure out how to remedy that now that we have the basic sirius tuner kit since presumably the OEM antenna can be used if we knew how to wire it / what adapter(s) to pick up.

@JRMSweeps

2 жыл бұрын

Not sure tbh. Sorry im of no help to ya my man.

@meStevo

2 жыл бұрын

Quite alright, thanks! Seems I need a Sat 1 connector for the oem antenna, need to make sure we can locate the typically yellow oem connection it will plug into.

@JRMSweeps

2 жыл бұрын

Def above my paygrade

I must be one dumb s.o.b i seen your video about 5 times and still cant get it 🤤😂 pac is almost the same i have c2r-chy4 wired up speakers but cant figure the other ones out any help would be greatly appreciated

@JRMSweeps

5 жыл бұрын

I was in the same boat u are in and finally figured it out...what exactly are you having trouble with and I will do my best to help ya!

@johnsanmiguel5652

5 жыл бұрын

Well i got it working but now i just did more research and i need another module for steering controls

@JRMSweeps

5 жыл бұрын

Yes sir, it seems that every piece of electrical group is ran off theses pac modules...good luck sir!

@johnsanmiguel5652

5 жыл бұрын

JRMSweeps thanks for the video after watching urs i kinda got an idea so thank u sir👍🏽

@IAmSoHoodBitchBankay

4 жыл бұрын

John San Miguel did you color matched all speaker wires or just the front ones? I saw other videos where they only used the white and grey wires.

Mucho blabla y no dice las cosas claras

@JRMSweeps

3 жыл бұрын

¿Porque, es en ingles?

Where does the blue and white wire off the interface get attached to?

@JRMSweeps

10 ай бұрын

Man, If I didn't explain it in the vid, I have no idea. I am sorry.