Great review Shaun, hopefully you'll get the add-ons soon and revisit these again. Yes I'm talking to you SIMAGIC! 😉

been debating on these, thanks for the video.

Amazing review Shaun. Just waiting on your review with the haptic motors 😎

They look awesome. Kinda 3 stage feeling sounds great to. Also the haptic motors for abs looking great. I think I buy the inverted with hydraulic kit and one haptic motor. In the moment I have the asetek invicta.

@devilsdust473

7 ай бұрын

just got mine in hydro inverted with 2 haptic only (throttle & brake). no regrets, much better than i ever expected :)

Great review… as usual! How do they compare to the Simtrecs ProPedal GT?

Great rev as always! During which I noticed you have the R seat P1 and it looks as though it’s on a motion platform. I also have the Rseat P1 and would love to know what type of motion platform is compatible with it. Kindly advise.

@TheSimpit

8 ай бұрын

it's the Dbox RSeat HF-L4

Shaun, I have a set of V3 Clubsport Pedals with load cell from Fanatec that I've never been able to quite figure out after 7 years. Would you say the P1000 inverted pedals are an upgrade from that or should I go for the P2000 hydraulic pedals to upgrade from those?

These are so bad ass!

I have a Simlab P1X, and an inverted set up for my current pedals. Just trying to see how I can mount these (in shipping)? A shout out to Simshop who I purchased these from. Based on email to them, they realized I was aiming for an inverted set up, but on my existing inverted structure. After hours, I was able to speak with them and get the right parts for my needs.

@SIMRIG412

6 ай бұрын

What do you need to do extra to mount them to existing inverted structure? I have simlabs gt1 evo with simlabs inverted mounts already and I’m looking to do the same thing

Thinking of purchasing the inverted mount for TR160 mk4 so I can space these pedals to my liking. Do you know if the standard P1000 pedals without the inverted mount can be removed from the base and mounted to my own plate? Or in this case the Trak Racer plate. thanks,

@TheSimpit

8 ай бұрын

Technically you could, but the problem you'd run into is the controller box is bolted in the pedal tray. The P2000 can be mounted anywhere and they are releasing a haptic add on for it soon.

I think its great the Pro's and cons were so weighted in one direction, and both the cons can be avoided by not going with the inverted set...That aside, i wouldn't lump these in with the V3's, That's what I just upgraded from and these are much better in everyway, and when you fit the haptic motors, HOT DAMN!

@Real28

6 ай бұрын

I have heard that these are WAY better than the V3s. My V3's just died, after having them since 2015. So while looking for something slightly better in a similar price point, these have been the obvious choice.

Just to confirm. If I buy the inverted ones can I still flip them to be regular. Or is the only way to have both options to get the regular and the inversion kit

where u get those trainers Shaun

I have the SIMMAGIC P1000, is this the same set but the inverted version just never seen the I before?

@TheSimpit

8 ай бұрын

Yup, it's the same set, just with the inverted tray

100% worth the inverted

I dig those shoes!

Great review as always! Could you test how much does the registering of the brake pedal drops while keeping a constant pressure with the foot? I saw people saying it drops by almost 20% which i think is crazy for a pedal of this level.

@TheSimpit

8 ай бұрын

Yeah, for sure.

@ty194

8 ай бұрын

That doesn't happen with the hydraulic brake.

@Jose-pq4bc

8 ай бұрын

@@ty194 do you have the hydraulic brake upgrade on the p1000?

@wangte27

8 ай бұрын

Several things to note. This is inherent in all pedal sets that use rubber/poly regardless of make. Softer rubber discs will register larger drops than harder ones. So if you understand this then, if you use softer rubber compound you will want to switch to hall sensor. If you use harder compound then use load sensor. It's all about understanding and knowing what to do.

@Jose-pq4bc

8 ай бұрын

@@wangte27 yes, i see that but that drop on the pedal measurement is usually 10% at max but on this pedal it is said to drop 20% or even almost 30%. This is too much.

I have these same pedals with hydraulic brake. One thing If you can you need the haptic reactors. Absolute game changer you know exactly where the limit is

@Jose-pq4bc

8 ай бұрын

Do you have the problem of the reading from the brake pedal droping while mantaining the same pressure with the foot when using the hydraulic upgrade?

@njracer34

8 ай бұрын

@@Jose-pq4bc no it stays right where It’s at

@Jose-pq4bc

8 ай бұрын

@@njracer34Do you remember if that happened when using the elastomers/rubbers on the original brake?

@Simlife101

8 ай бұрын

​@@Jose-pq4bcno I have the hydraulic mod. Also that pressure release is the same on all pedals using rubbers just like my Huesinkveld Pro pedals did it and so did my HE Ultimates

@pequeno77

7 ай бұрын

has been software addressed.@@Jose-pq4bc

can this be mounted on a NLR 2.0 rig and remain sturdy?

Im not sure if your mistaking the p2000 with the p1000 in regards to upgrading too a 200kg loadcell. P1000 do not show you can upgrade the loadcell?

@SIMRIG412

6 ай бұрын

Yes you can upgrade them to a 200kg depends where you buy them at. So must be an upgrade coming out

Surprisingly for me the blue string felt softer than the yellow one.

@hansenthe2nd

6 ай бұрын

Same here

Are you able to you use these with a Fanatec wheel n base?

@TheSimpit

8 ай бұрын

Yes you can!

Can you combine the hydraulic and haptic feedback together?

@wangte27

8 ай бұрын

Most definitely

@Simlife101

8 ай бұрын

I have haptics on brake and throttle and hydraulic mod

I’m trying to figure out why I have the same pedals but have different things on them

@ramel4l

6 ай бұрын

I have a module on the bottom with a cable attached to the side supports that goes into the module

Do you think it's worth upgrading from v3 fanatec to these or the p2000?

@mrpurple1901

8 ай бұрын

absolutely, i had them and i got the inverted ones wit haptic and is night and day

@TheSimpit

8 ай бұрын

They are much better than the V3s. I tired them at the expo with the haptic add on and they are a game changer

@SquiggyWigginz

8 ай бұрын

​@@TheSimpitDo the P2000's come with haptic? Couldn't tell from their website.

@SquiggyWigginz

8 ай бұрын

​@@mrpurple1901Do the P2000's come with haptic? Couldn't tell from their website.

@buddy5088

8 ай бұрын

@@SquiggyWigginzno. They don’t.

I WANT THEM! Do they fit on the P1X (original) rig? Cheers.

@TheSimpit

4 ай бұрын

Yes they do, you'll have to move the profile a bit to get the bolts to fit in the profile groves with the tnuts

@tedcrilly1

3 ай бұрын

@@TheSimpit Thankyou, I've been running Fanatec V3's forever, not doing it for me anymore. These look great!

Simagic P1000 or Simtrecs, which would you recommend?

@TheSimpit

4 ай бұрын

Both are a great set of pedals. it really comes down to what you are looking for in pedals.

Hey Shaun you still in Wa?

@TheSimpit

8 ай бұрын

Hey man, nope I'm back in Cali

😮

Title needs a little typo fix ;)

@OldCraig91

8 ай бұрын

The ones he was sent are that 1 better than the rest 🤣.

@Bert1986

8 ай бұрын

​​@@OldCraig91percs of being a reviewer? 😅

@TheSimpit

8 ай бұрын

lol fixed thank you