Still Running Strong!

Man thanks for this video i been looking for the wiring info on this truck

G man cruising! Love the video! informative but not over the top 5 out of 5 stars

I'm new to all of this! It's good for non-beginners

Great job explaining all this. I know you've helped a lot of puzzled dads.

Excellent tutorial! Great job brother!

@RaztechPowersports

Жыл бұрын

Thanks for watching 🏁

Thank you! I've been looking for a wiring diagram as I just picked up a 6v Silverado police truck for dirt cheap, however there are quite a few bypasses. Now you've shown what cable goes to what. She can only press the pedal for forward. Reverse does not work. I also want to upgrade to the dewalt battery mod and go dual motor and at least 12 volt. That is a neat controller. I see so many like it, but they all seem to have radiostatic speed controllers unlike the one you show. I'd click the link but it appears to be dead.

@RaztechPowersports

Жыл бұрын

Ahh thanks for letting me know. I’ll have to find another active link. Yes the speed controller is still running strong on 20v dewalt battery now.

Most of the PWM Moduls doesnt have motorbrake. Thats why i wahr to use RC ESC (Electronic Speed Control). But then u need a Servotester to implement the Hallsensor Gaspedle. More work to do. Hope it will work.

where does all accessories and light wires must connect ? to the same speaker wire like you did?

Is the pedal potentiometer based or hall sensor?

Hi, what wattage and amp speed controler did you use?

Bro thanks for the video very helpful but Amazon doesn’t have this product do you know where can I get it that will really help me

Thank u for the video. Do you have a link to this motor. I read that 250w output was needed in order to not fry the motors. Did you take this into consideration?

@RaztechPowersports

3 жыл бұрын

I’m using the factory motors on 12v (13.5v on full charge) no issues at all.

@ebbrxavier

3 жыл бұрын

@@RaztechPowersports thank you so so much for your reply. It was a typo from my side. I meant à link to the speed controller.... I do not intend to replace the stock motors as well. I have been spending 3 hours trying to find a suitable one on Amazon (I am in Belgium and searching on Amazon.fr). I found this one...do you think it will.work ? www.amazon.fr/dp/B073S3P1FY/ref=cm_sw_r_wa_apa_i_H34FNXHSRKQGZZKMGYJZ?_encoding=UTF8&psc=1 I want an on off switch and the possibility to go reverse and use the throttle. I read that the stock motors on my ride are 24v 350w brushed motors. Just not sure what esc to get. Do not mind spending more (so I can add rear lights...)

Was the Silverado 12v, and you kept it 12v after the speed controller mod? Or was it 6v and now 12v? Sorry if I missed that info.

@RaztechPowersports

3 жыл бұрын

It was originally 12v.

Can u make a video on how you install it

When will you get the update? thank you so much

how is this holding up? I fried grandsons 4x4 controller and need to come up with a replacements. The PWM i used to reduce a 40V Ryobi battery to the 24V his 4x4 needs let the full 40V through.

@RaztechPowersports

3 жыл бұрын

Still working great but still running on 12v agm battery

Hi there can’t make a video adding this item to a e-bike 3000w brushless motor kit , but still using the 48v 40amp controller that comes with the kit , using throttle and phase wires making it work together just like your video to a DC Motor Speed Controller,vinmax 10-50V 100A 5000W Reversible PWM

Super rad! Make it pop wheelies next go.

@RaztechPowersports

4 жыл бұрын

Cure Cycling Service it will eventually 😂🏁

Good idea..can u show circuit diagram

I just finally hooked mine up I’ll make a video also the only thing is there’s no brakes so you have to roll to his stop and the vehicle I’m using is a huffy torex

@RaztechPowersports

2 жыл бұрын

Yeah that’s the only downside. It’s okay on 12v because there isn’t much momentum. Now at higher voltage, not good

Your link to amazon Page is not working

Hey you have dane something to your pedal? I don't use stock harnes so I just need connect throttle pedal to controller but my pedal seems to have potentiometer broken and motors running a bit when it isn't pressed. Pedal is the same as yours, even wire colors are the same.

@RaztechPowersports

2 жыл бұрын

Hmmm no mine has been fine

@dawidrosinski5107

2 жыл бұрын

@@RaztechPowersports it's seems there are difference between resistance on hall sensor and potentiometer. I know asking a lot but if you will be able to check what's inside of pedal there where you take one spring. Is there hall sensor or linear potentiometer if hall than what number.

What hall effect is in the foot pedal? I check on mine and its 49e. When not stepping in the pedal, it is still making the motor spin at low rpm. When press down it makes it full throttle. But the motor never stop even with foot off the pedal. Do you know what hall effect model is on your pedal?

@RaztechPowersports

2 жыл бұрын

Hmmm that’s strange.. I never had that issue

@dawidrosinski5107

2 жыл бұрын

Hey you solve the problem? I have the same issue...

hi dude! could you give me the name of controler.. (the link its not more working...) thanks!

...is there a way to switch off the soft start in case the kid wants to do doughnuts? I worked on our neighbor kids jeep and it drifts but my kids has the soft start.

@RaztechPowersports

2 жыл бұрын

There is not an easy way to do this. I know there is a certain soft start chip you can eliminate on other electric speed controllers. Do some research on that 🔧⚡️

Do you have a link for that controller setup? My son's exact same truck did the exact same thing.

@RaztechPowersports

3 жыл бұрын

Josh Sicking www.ebay.com/itm/182889907416. It’s a little pricey but a good speed control for future mods

@joshsicking1075

3 жыл бұрын

@@RaztechPowersports thank you so much. Just had this same thing happen 2 days ago. Kids are going crazy wanting to ride it so I rigged it up with a cheap speed controller off of a potentiometer knob. I don't like the idea of no pedal. Just ordered this and I love how it'll support more power.

@RaztechPowersports

3 жыл бұрын

Josh Sicking no problem, yeah if you understand electronic, which you sound like you do.. it’s a pretty cool speed controller. I have it setup on a single 12v deep cycle boat battery for now, comical range even offroad. Waiting for the motors to fry and then the mods begin lol

Can you share the link where to get the exact speed controller? I am debating whether or not to go through an rc car esc or this set up.

@RaztechPowersports

3 жыл бұрын

I would do with this speed control over an Rc version. Much more heavy duty. I don’t have the exact link but they are all over eBay for 80ish bucks with the gas pedal. Still runs great btw

@sandyx4522

3 жыл бұрын

www.aliexpress.com/item/32716293972.html

@RaztechPowersports

3 жыл бұрын

@@sandyx4522 they are also available on eBay

Does this provide braking when throttle is let off? Thinking of doing it on power wheels blue jeep

@RaztechPowersports

Жыл бұрын

It doesn’t unfortunately. That’s the only drawback

How would it be using a Milwaukee 18v drill battery set up ? Would it be faster then using a 12v ?

@RaztechPowersports

Жыл бұрын

Much faster. I’m currently running a 20v Dewalt 5ah and it rips. Driving offroad does tend to drain the lipo pretty quick. Onroad is perfect

Can you please put the link up again or possibly just type the name of the product you used?

What size fuse did you use on the power line going to the controller?

@RaztechPowersports

3 жыл бұрын

30 amp

@chuckfaisst1890

3 жыл бұрын

Thanks

@RaztechPowersports

3 жыл бұрын

@@chuckfaisst1890 no problem

What did you end up doing with the lights? (Yellow wire out of truck)

@RaztechPowersports

Жыл бұрын

No i didn’t actually. I think it would be safe to wire off of the trigger wire if it’s 12v

I would be careful with the factory harnest. I Don't think the wires on the harnest cud handle the amp. Going through the wires. Being that they are so thin , so i would be careful when u turn it up all the way maybe a fuse or something you wouldn't want the wires to catch on fire , other than that you did great on the set up great idea and great set up very informative but you should change the wires 14gauge at least just in case to withstand the amp withdraw ... Going through them for when u are ready to turn the. Esc all the way up

@RaztechPowersports

3 жыл бұрын

Giant Giant thanks, I did add a 30amp inline fuse and it has held so far. I agree it definitely needs a failsafe. So far the wires haven’t been an issue but I would like to upgrade them regardless 🏁

she rips!

Hay bud help me out here where did u order ur speed controller from?

@RaztechPowersports

2 жыл бұрын

I included a link in the description 👍🏻

Haw to fix tha motor in wheel making video Thanks I'm from Pakistan reply must

Did this seem to make it a bit faster?

@RaztechPowersports

2 жыл бұрын

Yes but by a small amount. More voltage will equal more speed

How did you know you the speed controller needed replaced?

@RaztechPowersports

3 жыл бұрын

Add no voltage going to the motors

@emilykinney9256

3 жыл бұрын

@@RaztechPowersports Sorry, I'm not great on knowing this kind of stuff. We have this same pickup and it turns on, but when pushing the petal it won't go. I was thinking a petal issue? My husband thinks we just need a new battery.

@RaztechPowersports

3 жыл бұрын

@@emilykinney9256 does the voltage meter still work on the dash? Would be a easy way to determine if it needs a battery

Do you have a link for this product?

@RaztechPowersports

2 жыл бұрын

Yes, I believe it’s in the description

can you send me link for this controller

We have the same truck when we turn the key to on it beeps three times and doesn't do anything else. I can't find any information on why or what needs replaced. Anyone had this issue???

@TheRockfordfiles

2 жыл бұрын

I'm having the exact same issue, did you happen to find out a solution to the problem?

@kevincarver4204

2 жыл бұрын

I haven't yet I'm still looking for help

Sense you stayed 12v did you really need the controller?

@RaztechPowersports

Жыл бұрын

Well now it runs on 20 V DeWalt lithium batteries

Does the speed controller make it faster ??

@RaztechPowersports

Жыл бұрын

The voltage really controls the speed. On 20v dewalt lithium batteries… it flies lol

Could this be used on an e-scooter like a xiaomi m365??

@RaztechPowersports

Жыл бұрын

Yes I believe they have versions of this speed controller with a twist throttle

@kennysanti6557

Жыл бұрын

How many amps does it kick out on 36 volts?

@kennysanti6557

Жыл бұрын

Sorry my bad it's for a brush 2 phase motor not a brushless 3 phase

Link is dead

Wish you would have showed a little more

@RaztechPowersports

3 жыл бұрын

Sorry but it gives you a good starting point! You got this 💪🏻🛠

link is dead

@RaztechPowersports

Жыл бұрын

Ahhh sorry I’ll try to update it tonight. Just upgrade to 20v and still running strong

@Richardmr18

3 ай бұрын

When will you get the update? thank you so much

El lunes en la inormación el lunes te nvío la el uso de este correo

120$ for the controller. yikes. what if you just bypass the factory controller and run an over volt directly to motor. all on or all off