I love it when a young guy corrects the field and teaches cleanliness. I try to teach my apprentices to "work like an old guy" meaning take it easy on yourself, do the details so there is "one less thing to defeat you" . I think this video reinforces that attitude, bravo! and cheers!

@AS-3D

5 жыл бұрын

Agreed! That goes with all engineering especially 3D printing 😂

Very timely for a cleanliness comment like that, Jody. Made a new mail box pole for a buddy of mine yesterday out of some left over square tubing I had laying around. I marked out the positions of the weld joints and went to grinding off the rust and mill scale. His comment was along the lines of "you ain't gotta do all that, it's just a mail box post." To prove my effort was not useless, I left one joint unprepared, rust, scale, oil....had him watch. Let's just say he was glad that joint was on the side to be ground smooth and covered by the mailbox.

I get more satisfaction gas welding than any other welding. I worked for a while installing cryogenic liquid and gas systems for industrial and medical applications. Cleanliness is the key regardless of the end use but medical applications especially since people’s lives were dependent on the quality of your work. Our systems were entirely made of copper pipe, stainless steel pipe and valves, and brass/bronze valves/fittings. I enjoyed everything about the job but especially the brazing. There is something very satisfying in watching the silver melt and run to the heat. Darlington, South Carolina

The two most useful skills I have ever learned are silver brazing and drill sharpening. Lots of welders seem afraid of or look down on silver brazing but it produces nice clean tidy looking repairs with inexpensive tools.

@Gottenhimfella

3 жыл бұрын

Indeed. And it doesn't leave crevices, which can be important for food, medical, pharma and lab equipment.

You got me through welding school bud. Thanks.

My husband is a Quality bicycle fan. His favorite bicycle is Columbus tubing, spear point lugs, campy droup outs, gorgeous fork crown. This bicycle was ridden very hard and has stood the test of time. It was purchased new in 1975 making it 47 years old. Never crashed hard and will most likely outlive us.

This is one of the better silver brazing videos I’ve seen, and is more on par with the quality that I used to produce… so many guys out there that don’t pay attention to their heat/metal color, and crust up the metal, or ball up the silver all over.

I learned silver brazing years back in workshop I worked in. What I like the most about silver joints is that you can join together many metals. Like brass and stainless or titanium and mild steel. And joints are tough. Often more than weld.

Great video Jody and Mike. Lovely to see such clean work. Thanks.

Been having to do a lot more brazing/ soldering lately. Appreciate the video Mr. Jody.

I used the TIG arc to do a little copper pipe silver soldering the other day. Very impressed with the process and will go back and work on my own chart of Amps and Material sizes just for future references.

Great video with lots of info to learn from! Thanks Jody!

Mate, i always learn something from your vids. Thanks.

Great video. A lot of good points covered here.

In the last shop I worked at we used that same yellow bristle brush(except larger and on a variable speed angle grinder) to clean up stainless welds . It worked great getting into the corners of tube welds and unless you used it on something sharp it lasted a long time. They are pretty pricey though.

If it wasnt for the certification i wouldn't go to school at all. Thanks jody you always helpfull, keep up the good work

I remember a high-end Italian racing bike I saw almost 50 years ago, with a clear-coated frame, done by the company's best (oldest) frame builder as a demo. The brazing looked like pinstriping. It was a real masterwork.

@edmundooliver7584

5 жыл бұрын

what was the color of the braze.

@jonrbryan

5 жыл бұрын

@@edmundooliver7584 He must have used a bronze rod, because it made a nice "gold" contrast to the rest of the frame. Ah, now I remember that it was a Masi! It's been a long, long time.

Another very informative video, nice job guys..

Awesome video Jody 👊🏻

Excellent video for brazing, thanks.

Thanks for the Videos they are definitely helpful on my thin aluminum tig welding and sheet metal.!

thanks for the instructive videos greetihgs from Kazakhstan !

Will there be a titanium video dropping soon? These videos with mike have been brilliant 👍

That helps quite a bit. I always like to see inside a builder's shop. I have been struggling trying to teach myself these skills and I appreciate the insight your video has given me. More videos about bike building please! What size tip was he using on that torch?

I seem to come back to this vid every so often as a refresher as I braze so infrequently these days. Yesterday I was trying to braze up a brass nipple on a stainless tube and it went all kinds of sideways. It fits pretty close, I cleaned everything til the steel was 'in the white' and the brass was shiny new, fluxed up and tried your prebent/wrapped silver trick, aaaaaaand it didn't seep into the joint. It doesn't help that the fitting is inverted, but the silver just rolled down the stainless and balled up. After a thorough clean yesterday, I may have to try a tack weld so I can turn it over and take another stab today. I was also trying a new dohicky attachment on the end of the torch that looks like a dragon's mouth that is supposed to be for sweating copper, but I think I cooked the flux well before the metal was good and hot. Swapped back to the known nozzle. Anything else I might need to change?

Thanks Jody - very useful. Hope that right hand finger's mending!

Nice touch, something one just doesn't get perfect the first time. Thanks for the video.

@joejoejoejoejoejoe4391

3 жыл бұрын

But that first time, when the solder/braze flows just like you want it to, a joy to behold !

You guys make it look easy 🤯

That torch tip was clogged AF. Awesome job on the brazing though 👏 👌 👍

Excellent video

The stuff I’m working with is very small Stainless steel tubing. 1mm & smaller. 1:25 Scale Auto model tube frame. 👉Anyone reading this have any positive constructive suggestions I’d really appreciate it. I build Ultra Detailed NHRA type race-car’s ect. I’ve used Stainless Steel tubing for most of the builds I’ve done, but just used epoxy to join the surfaces. So a Brazing technique is something BRAND New for me🤓 Luv the video✅

Brilliant and inspiring!

The best looking product for the customer 👍

Love your channel ❤️

What a beautiful weld

Good informal vid. I fab heat ex changers, refrigerant coils, evaporators and steam coils for the steam industry, i agree on a darker environment for brazing. I wear dark polarized glasses to allow me to see penetration of the joint

@chaddarr4834

3 жыл бұрын

Good info I have a heating and cooling air-conditioning company so that’ll help us out a lot on heat exchangers

thanks for this amazing vid.

Would love to see bronze brazing and welding videos

Thanks Doug Ankurm: Good Advice

That shadow that's seen when brazing isn't the melted rod passing through the joint. It's the joint cooling off that little bit like it does when rod is added. It's almost the same thing but the shadow runs ahead of the filler materiel. I know guys who have relied on the shadow as an indicator that the copper joint was full when going for their state certification which requires full penetration on 2- 1 1/2" horizontal and 2- 1 1/2" vertical up joints, and the shadow indicator let them down leaving holidays up at the 12 o'clock position on the horizontal joints.

Great video and discussion. I would add that it is important to not overheat when brazing. The joint should be heated up just enough so that when the filler braze rod is touched to the joint, it will melt and flow in.

Clean...clean..clean! I usually have to be careful not to overheat when silver brazing. I had never done any until I started working at Delta. Which would mean you taught me how. 👍

@weldingtipsandtricks

5 жыл бұрын

Icky!

@ickabod545

5 жыл бұрын

@@weldingtipsandtricks Haha! Yep!

Great video

Great video as always! Could you maybe do a video comparing brazing with propane vs acetylene?

@Holly_Mike

11 ай бұрын

Propane alone isn’t going to get hot enough, fast enough. I used to use oxygen and natural gas, but had to have a pump to boost the pressure of the natural gas. I also had an in-line fluxxer (fed flux through the torch,) that kept things even cleaner/allowed a bit more “play time” with adding filler metal.

Thanks for sharing video full of knowledge. Can we do fillet brazing with silver? like brass?

Good job guys... thanks...

great lesson,, thanks ,,

I got to tell you I think the brazing is a lot stronger than the welding of steal. I have a 57 scwinn built that way and you can break the steal before you break the bond. Good lesson. And best used for classic customs.

hi sir , may be you have to try the silicone bronze brasing , with the adequat flux , or look for silver bronze alloy rods

Nice video, thanks...

Very nice heat control. Theres a really good " how to" book called Lugged bike frame construction.

Great vid thanks

Hey Jody, any chance of a review of various PAPR systems - weight and performance - Miller Vortex, 3M AdFlo, Lincoln PAPR are the main three I'm looking at, and everyone just tells me to get the particular brand they own. There's also the Optrel one, but that's stupidly expensive. Thanks if you can help with this - your videos on TIG welding since I first struck an arc in 2013 have honestly taught me more than my 6 months in welding school, and helped me with proper terminology / practices in my two welding jobs so far (whisky stillmaking, and now fabrication of designer furniture).

Cheers Jody

Thank you

Me gustan tus videos son buenos

Very nice video. Can you do a video on aluminum brazing that might be used on an air conditioning coil? Most of todays coils are made of this or an aluminum alloy. Thanks for the great video's.

@weldingtipsandtricks

5 жыл бұрын

Mike does a bit of aluminum brazing on aluminum frames for small cable attachments etc. ...maybe we work up a video

@simclardy1

5 жыл бұрын

I use alcor (al200r) by Harris. I have tried different products but this works great for me. I believe this is what carrier uses on the assembly line but don't quote me. It is designed for aluminum to copper as well.

@watermanone7567

5 жыл бұрын

Thanks Simclardy1. I have done thousands of jobs with silver but very limited on aluminum. Appreciate the info.

@dougankrum3328

5 жыл бұрын

I've done some aluminum brazing on automotive AC stuff, very narrow heat range between not enough, and 'Whoops', a big puddle of melted metal..! Most of the AC and automotive aluminum radiators are 'furnace brazed' where they control the heat to within a few degrees, then maybe TIG weld on the fittings where there's little thicker part/flange. By the way, the auto AC stuff was brazed until the shop owner finally bought a smaller TIG machine, then I took my TIG welder home....

I've used just about every brand of silver brazing alloy and one brand stands out as the best and that is Price & Izant. Harris brand seems decent, although not as nice, and may still be American-made, but many big brands are now importing their brazing alloys, often from Asia. 56 percent brazing alloy BAg-7 is good for the lugs, the top of the seat stays and the chain stays at the bottom bracket shell, but it is not good for the wide gaps at the dropouts. 50 percent silver with nickel brazing alloy BAg-24 is good for the dropouts. It's melting temperature is slightly higher than 56 percent silver, but the dropout ends of the stays are smaller than the main tubes and should require less time at temperature, although a lot of brazing rod is needed to fill them properly.

nice video

Nice one

jody when it comes to brazing are we looking for more or less silver content in the rod? and for soldering?

Hello dear friend. I appreciate transmitting your knowledge to people, at this precise moment I am looking for a solution to a problem that I currently have. I need to repair a cryogenic valve that is joined by stainless steel with bronze. People tell me that silver solder is indicated in the repair process. I wanted to know your opinion about it. Greetings¡

Steel bike frames seem expensive, until you realize how much work goes into ONE joint. Sometimes, when I'm silver brazing close to a thread, I'll file some silver brazing rod, mix the filings with flux and put it on the joint and just heat it up. I've heard that you can use tip-ex ( correction fluid ) to stop silver solder from flowing where you don't want it to. I never knew that the silver solder runs TOWARDS heat, I'll remember that next time, thanks!

I used a pair of medium shade safety glasses, to see the color change and flow of filler metal that they referred to about 75% of the way through the video.

Great video in silver brazing. I heard you saying 56% Ag, but you didn't disclose the brand names of the silver solder and the flux. Can you tell me what brands you have used in this video. Happy holidays.

in another video you wiped down with reagent acetone but I didn't see it mentioned n this one, I'm guessing you did use it.

i was really surprised by the amount of flux he used. Now I've only done silver brazing a few times and it was not using wire like him but a thin film and the silver tends to do everywhere there is flux ( as long as the tolerance are also good) so seeing just how much flux he was using i though was going to either get silver everywhere or that it was actually going to impede the process.

Contemplating silver brazing a brass spin guard to a damascus bowie knife blade using ESAB Type: 155 FC Trucoat. The contents of the damascus and brass are unknown. Any experience, thoughts or advice?

I have an AWS code for silver braze. We have a hot water boiling tank where we boil off the flux in 98 degrees of water for 20-40 mins.

@weldingtipsandtricks

5 жыл бұрын

hot water soak definitely helps to get the flux off

@lordeverybody872

3 жыл бұрын

Pickle and hydrogen peroxide at 180 works well for brass. Not sure about steel

Excellent, my only question, are those saddle fittings investment castings?? There are a few shops here in Sacramento, California building bicycle frames, but you can't even get in the front door...security/secrets and all...I used to work right across the street from Ventana...no way you could get in there without invitation, even guys looking for a TIG welding job had to make appointments...

Cleanliness, would like a wax & grease remover be a good cleaner?

you always come up with great vids, Jody....he mentions two alternatives when brazing 56% slver for close tolerances and another one which I didn't quite get....what was he talking about?

@leonardpearlman4017

4 жыл бұрын

He was talking about "low fuming bronze", the regular stuff people use for brazing. It's very strong and of course cheaper than silver. There's dozens of kinds of brazing alloys, silver-solders, and FLUXES! If you really get into it it can become quite confusing. Anyway, some kinds of silver-solder flow like water and will get into very tight joints, one to three thousandths is something you hear a lot. Others will fill gaps, make fillets and so on. These joints are not in any way inferior to welding, and of course have less heat damage to the fancy heat treated tubing! My real interest in these techniques comes from the constant need to join dissimilar metals, things that could not be welded.

Forgive my lack of hearing what did he call that device at the end of the video used to braze with? With my hearing it sounded like a light sock. I was surprised when I found out that the fittings were brazed on Aircraft turbine engine fuel lines. Never seen one crack.

I'm guessing that carborizing flame is to help with heat control?

Very interesting I was sent up on the roof at my job one day years ago given silver solder, flux and a torch and told to repair a cooling unit radiator and had no idea what to do and of course was not successful. It is another skill I never learned.

@weldingtipsandtricks

5 жыл бұрын

its a lot like trying to learn how to use some software like excel. if someone looks over your shoulder for about 10 minutes and gets you going, it seems pretty easy....but on your own it can be so frustrating

@Ztingjammer

5 жыл бұрын

@@weldingtipsandtricks exactly!

@davejohnsonnola2758

4 жыл бұрын

3 am trying to patch the bottom of a buffet line. Six stainless steel pans with a common manifold drain. Electric heat element shorted against the bottom of on pan and made a hole. Tried to use 56% Solderweld fluxed rod with a turbotorch...wound up making a bigger hole. 4am. JB Weld to the rescue. 9pm the next night still looking for a better way. Thinking more flux and a real torch next time.

@chaddarr4834

3 жыл бұрын

dave johnsonnola how did that turn out

@leonardpearlman4017

3 жыл бұрын

@@davejohnsonnola2758 And maybe VERY thorough cleaning! Maybe a little sanding or something? I did a little bit of TIG welding on the outside of a deep-fryer once... it was so YUCKY. Spent probably an hour cleaning the spot, starting with a sharp SCRAPER, then solvents and steel wool, and whatever we could think of. The actual weld just took a few SECONDS. I think without all that cleaning it wouldn't have been possible at all.

Do you need special tinted dark glasses for silver brazing?

will a 55% silver rod will brase copper to stainless with sandpaper cleaning flux and everything? like can i weld copper to stainless with a55%silver alloy?

When he says "joining steel to stainless" would that be like the chain stays?

Do you have or can you make a video on oxy acetylene welding

Could you do a video of brazing carbide teeth into a saw blade? There isn't one that shows the actual application of the rod. Thanks!

@leonardpearlman4017

4 жыл бұрын

There are several videos from Carbide Processors, and they sell supplies and tools too!

Hello sir Plz. Suggest us the fuel tank brazing parts ms to SS 304 leakage joints alloy with low cost brazing rods

Will there be gas welding videos coming next? :-)

Wow! Alot of stress in a joint like that. I didn't think it would be strong enough to hold something like that together. I bet a jewellers torch would be good for that!

@andrebartels1690

4 жыл бұрын

Well, yes and no. Yes, it is very handy and you can position the heat very precisely. But it doesn't deliver enough hot gas to heat up the entire joint, so you can't let the silver melt on the opposite side from the flame. If you want to apply this technique, you need a bigger yet softer flame.

Is silver Brazing the same process as silver solder that you use on small steam engines?

Hey thanks for the video! I have a question, I brazed the bottom bracket but I see it crooked, its too crooked to be cold set, how do i fix it? By melting the silver again? Or acid ?

@chaddarr4834

3 жыл бұрын

You can reheat it and it will liquefy and you can reset it however you like

Why would you braze that frame if you have welding gear? I'm thinking of trying some brazing myself for some minor shelf repair in a commercial pizza oven. My limited torch experience is from high school auto body class.

Thanks for the video. Can I use propane + oxygen instead?

@luciusirving5926

3 жыл бұрын

Yes you can.

Touch curing Stanley's stele

What brand of silver solder and flux was that ?

great. if you are making high end bike frames keep the heat as low as possible to avoid changing the physical properties of the tubing. no need to go red hot with silver.

@leonardpearlman4017

3 жыл бұрын

That's how I keep screwing it up! More than anything else: Too much heat! Then you try to "fix" it with MORE heat, and screw it up all the WAY. Especially with stainless. When you get it right, it's so beautiful....

I was not able to hear it, what kind of clearance is needed for bronze?

Please describe "breathing holes", are these holes to the interior of the tube under the connector, or holes through the connector ?

@weldingtipsandtricks

5 жыл бұрын

breathing holes would be small holes maybe .125" or so, drilled where the tubes mate so that gases can escape and not build pressure...they also allow the frame to be rinsed and drained and then heated so that moisture evaporates

what is the percentage of silver is a good for general purpose brazing ? , i went to a welding store they have 3 “flavours” of silver brazing .

@chaddarr4834

3 жыл бұрын

It’s my understanding that the higher the silver content the easier it is to braze the similar metals we have a heating and cooling business and use 15% silver Sauter to solder a copper pipes together but when you get to brass and steel on dis similar metals we usually use a 56% silver there’s a flux on the outside of the filler metal. Now if you’re doing the similar medals I’m not talking tensile strength or anything like that I don’t know that but bronze rod usually coded it’s white with Brian’s on the inside I soldered Sheet Metal together I soldered steel and brass together multiple different things that’s a hell of a lot cheaper than Silver

How do you make that lug bracket shape out of metal?

QUESTION about auto-darkening helmet, HELP!! : . So, I'm learning to weld and this is my first auto darkening helmet I bought. It's the $120 KOBALT that they sell at Lowe's. When I'm welding and my tungsten touches the filler rod and metal it does a VERY BRIGHT FLASH... and USELESS the helmet is on FULL sensitivity, INSTEAD of remaining dark the screen actually lightens up as if it was on the grinder setting. On full sensitivity it does fine... IS THIS NORMAL (even for top brands) or do I have a defective product?

@tonyhill3638

5 жыл бұрын

Take it back and get another one. You should not be getting flashes on a regular basis. If the second one does it, find another brand. I got a $49 HF mask in a pinch, and it works surprisingly well, as long as I let it sit in the sun for a few minutes to charge it up. Maybe try that on your Kobalt?

Will an air-acetylen torch be enough heat for brazing a bike frame with relatively thinwall steel tubes?

@jacobadams2616

Жыл бұрын

Absolutely. You can even do thin walled steel tubes with MAPP gas or propane,

Hey jodi, is there any reason you use oxy acetylene over oxy propane? Mostly ive cut scrap with oxy propane, just wondering if acetylene has any real benefits and what they are.

@jessehigley5283

5 жыл бұрын

It's hotter. Heats things up faster. Plus he probably started with oxy acetylene and got used to it.

@leonardpearlman4017

3 жыл бұрын

Higher temperature AND intensity! For small stuff I have good results with an air-acetylene torch. Very safe and simple to handle, good for students. You can't weld with it, but it's good for general heating.

@chrisjokinen217

2 жыл бұрын

@@leonardpearlman4017 I always like OXY/LPG. Clean and cheap

.007" to .010" clearance sounds like a lot, especially for 56% silver which has a high fluidity rating, obviously it worked though. 45% is good for a joint when you have more clearance. Nice braze joint Mike!

@craigspakowski7398

5 жыл бұрын

Based on that number I suspect he was talking based on diameter. 0.003" to 0.005" on the radius.

@ScienceFTW

5 жыл бұрын

Yes, you guys are right. I had diameter on my mind. What I said in the video was not correct. 0.003-0.005 actual clearance on the radius.

@precisionarc

5 жыл бұрын

Craig and Mike, I should of thought of that, again, nice work Mike

I braze for a living. Good video.

@MrStropparo

5 жыл бұрын

I always use a #4. I run at 10 psi acetylene 20 psi oxygen. I adjust hand controls depending on the job and the metal composition. Brass to stainless is a very low heat setting. Torch is nearly silent. Copper to brass and the torch sounds like a jet engine. It just depends.

@sean7193

5 жыл бұрын

Stropp, Is it acceptable to add water to the white flux to make it easier to spread?

@chaddarr4834

3 жыл бұрын

MrStropparo same here(do it for a living)Oxygen acetylene pressures I keep the same also and feather in by the controls on the torch. You can tell you’ve been doing it like I have and just know by listening to the torch sound I thought I was the only one that said it in those terms

Hi, where can i buy this flux and Silver. For brazing lugs