SILICONE RENDER | Is This The Best Rendering System?? (FULL PROCESS EXPLAINED)

Тәжірибелік нұсқаулар және стиль

This video shows the full process on how to render a timber frame extention. Click the link here for a more detailed video on rendering with Silicone render:
• Silicone Render | Best...
Here's the steps we outline in this video:
- Fixing the corner beads with Baumit Star Contact
- Bedding the walls with Render mesh using Baumit Star Contact as the base coat
- Flatten and build the walls using Baumit Star Contact
- Float the render flat as the render dries
- Prime the walls ready for top coat using Baumit UNIPRIMER
- Apply and float to a finish using Baumit Silikontop render
This is the full process to rendering a wall using Silicon Render If you like this video then please like and subscribe. And feel free to leave a comment - we’d love to hear from you
Subscribe to our channel from the link below: / plasteringforbeginners
Thanks for watching. I'll see you one the next one.
Cheers.
Blaine Gray,
Plastering For Beginners
#construction #plastering #diy #stucco #Renderingwalls #siliconerender

Пікірлер: 92

  • @rossmcleod7983
    @rossmcleod7983 Жыл бұрын

    Clear as crystal and much appreciated.

  • @henrikbilar
    @henrikbilar Жыл бұрын

    Great video as always! I am a complete render novice, only having plastered/skimmed a house previously, but the previous video on silicone on timber frame gave me the confidence to try it out on my garden building. I used the ewipro system, but it’s very similar to this, and the finish is, in my untrained eyes, amazing 😅 Thank you for these videos!

  • @leigh9919
    @leigh9919 Жыл бұрын

    Nice job pal, we’ve been doing that system with wetherby on insulated boards on council property’s now for 15 years and to be fair it ages quite well. Keep up the good work 👍

  • @als1023
    @als10239 ай бұрын

    Excellent tip about building and edge on larger surfaces, to give a spot for the next patch to work. Thanks for that !! I use products like this to cover old concrete walls, that are unsightly, 1st doing a scratch coat to level out the walls, letting this dry 30 days, because it's a cementicious product.

  • @RichardDowd
    @RichardDowd Жыл бұрын

    Looks like a good system Blaine. Great video as always🚀🚀

  • @AntKardano
    @AntKardano10 ай бұрын

    amazing tip on working alone! THANK YOU SO MUCH. I prefer to work alone myself and this job I was told you can not do alone.

  • @deanetheridge4259
    @deanetheridge4259 Жыл бұрын

    Thanks very much for the video, I found it very helpful 👍

  • @viankalobosvalenzuela7456
    @viankalobosvalenzuela7456 Жыл бұрын

    Excelente trabajo saludos 👍👌

  • @sdevane75
    @sdevane752 ай бұрын

    excellent video- very impressive

  • @benwilkinson5457
    @benwilkinson54577 ай бұрын

    Good video Blaine. Not tried this system yet, but got an EWI job for my brother next year and will do a thin coat render on this.

  • @leyeti77
    @leyeti778 ай бұрын

    Thanks for the tips (I'll use the same product on my house)

  • @JFirn86Q
    @JFirn86Q Жыл бұрын

    Damn that looks amazing, seems like a durable system too. Pro job.

  • @PlasteringForBeginners

    @PlasteringForBeginners

    Жыл бұрын

    It’s great to be fair!

  • @JFirn86Q

    @JFirn86Q

    Жыл бұрын

    @@PlasteringForBeginners Really good tip on doing a meter at a time too and building up a wet edge, as someone doing it alone!

  • @MarcusT86
    @MarcusT86 Жыл бұрын

    Brilliant as always buddy. Was this on top of EWI boards?

  • @gdfggggg
    @gdfggggg Жыл бұрын

    Nice.

  • @samholmes4091
    @samholmes409111 ай бұрын

    absolutely brilliant video mate 💪🏼 what thickness beads are you using? also how would the basecoat change if going onto blockwork? cheers

  • @mattybrookes1
    @mattybrookes13 ай бұрын

    Really useful information thank you. I have to render my bay which has some bad cracks so this would be an ideal system to use. Is the top coat available in a completely smooth/fine finish?

  • @user-dq1eq7jw2p
    @user-dq1eq7jw2p3 ай бұрын

    Great video

  • @PlasteringForBeginners

    @PlasteringForBeginners

    3 ай бұрын

    Thanks!

  • @SM-mk9kl
    @SM-mk9kl Жыл бұрын

    Just had my whole house done in the exact same way using EWi products and render. I am amazed at how nice the finish is and how easily they did it. Will last a long time me thinks 😊

  • @M.A.691

    @M.A.691

    8 ай бұрын

    Yes definitely a long time many years to come, after 10 years you can do a single coat of silicone paint

  • @freaklosophy
    @freaklosophy Жыл бұрын

    Hey Blayne, thanks for the good work! One question for you. When cross-trowelling a wall, why do you hold the vertical axis of the trowel at a 45° angle to the floor? Why not at a 90° angle (i.e. vertical)? It's something that puzzles me when I watch your videos. Thanks very much!

  • @michaeltaylor9377
    @michaeltaylor93773 ай бұрын

    Very helpful I’ve be leaving it too long to float it of

  • @kitchschopshop4075
    @kitchschopshop4075 Жыл бұрын

    Define easier than s&c and an overall better more consistent product, I avoid s&c now, only recommend silicone.. never use this system but looks easy enough.. top work

  • @darrenthebuilder
    @darrenthebuilder Жыл бұрын

    We use something like this in the Caribbean. It’s called Trowel tex. thin coat then rub it with a plastic float.

  • @durexjim
    @durexjim Жыл бұрын

    Top job that m8

  • @PlasteringForBeginners

    @PlasteringForBeginners

    Жыл бұрын

    Cheers matey!

  • @MrPhillAsh
    @MrPhillAsh Жыл бұрын

    Hey mate, thanks for putting this video together it's excellent. I'd really like to use this Baumit but everywhere I've looked to order it seems to charge insane amounts for delivery. I need three bags and I'm getting quoted £136 for delivery which is insane! I couldn't seem to see it in any of the major merchants only K-Rend.. Where do you get yours?

  • @bluevanmani
    @bluevanmani Жыл бұрын

    Would it be easier Blaine to spray the topcoat if your working o your own????

  • @terryhill6734
    @terryhill6734 Жыл бұрын

    I swear by this system. At the minute I’m using Johnstone’s Trade products but have also used EWI Store products in this country and also Brillux, Sto and Ispo in Germany. Ispo was one of the first but sadly no longer exists. All fantastic materials 👍🏻

  • @jimmclaughlin309
    @jimmclaughlin3093 ай бұрын

    We were doing this render in new Zealand 30odd years ago 😊

  • @jussttg
    @jussttg Жыл бұрын

    Hello Blaine, have you worked with silicone, silicate and acrylic type of renders or just silicone? Have you noticed any difference in them if so? Maybe you have experience of rendering magnesium oxide boards, MgO?

  • @jacl4636
    @jacl4636 Жыл бұрын

    Blaine do you prefer this to the weberend ocr? I wouldn’t do sand and cement now. But ocr looks good too

  • @petespencer5260
    @petespencer5260 Жыл бұрын

    Great tip on the wet edge. That's one of the hardest parts on your own. I find speedskim the base coat leaves a good finish without the need to float.

  • @PlasteringForBeginners

    @PlasteringForBeginners

    Жыл бұрын

    Glad it’s helped mate and I’ll give that Speedskim tip a go in the future! Thanks for the comment and thanks for watching. Much appreciated 👍

  • @siazare6142
    @siazare61427 ай бұрын

    Hi I’ll be appreciate if you tell me What material can put over waterproof? Thanks

  • @1414141x
    @1414141x3 ай бұрын

    Hi Blaine. Last year they did a garage conversion a few doors down from me , putting a timer framed builing on top as well. I was watching and learning of course - and I'm pretty sure that it was exactly the same sort of system - ie using cement boards, but I seem to remember them putting some form of primer on before they put the first coat of render. If I recall it was like a pinkish watery primer. Does that ring any bells with you ?

  • @adrianadios5041
    @adrianadios50414 ай бұрын

    Hi mate can you put this straight on brick?

  • @grzegorzgoralski6667
    @grzegorzgoralski66672 ай бұрын

    Hi Mate Can I use weber one coat base as the base and then silicone baumit on top?

  • @robbogsy3469
    @robbogsy34693 ай бұрын

    Can you please tell me what sort of float you use when you were floating the second coat.

  • @djhago3123
    @djhago3123 Жыл бұрын

    You can buy a bead that sticks to the window frame and has a little strip you tear of afterwards to keep the edge of the window clean

  • @HerbalTee29

    @HerbalTee29

    10 ай бұрын

    Yeah if you find them let me know.. impossible to get them in Australia

  • @u2kjib4cjkqn

    @u2kjib4cjkqn

    10 ай бұрын

    They also allow for a bit movement when the window frame expands in the heat

  • @johnthurston7783
    @johnthurston778311 ай бұрын

    Where do I get star contact can I use for top coat

  • @leegorman3329
    @leegorman33293 ай бұрын

    would you use 6mm thin coat over block work or would you see mortar lines?

  • @perry4078
    @perry4078 Жыл бұрын

    My friends side of of her house, the old s&c has all blown on timber framed extension, was looking at using this system for her, the area is about 20m2, any idea how much this would cost in materials please?

  • @lloyd6943
    @lloyd6943 Жыл бұрын

    I’ve only ever used ewi is this product cheaper blain

  • @martindonaton3603
    @martindonaton3603 Жыл бұрын

    Your really good at doing this and you explain it very well I personally just don’t like the finish this product leaves

  • @SprintsNClimbs
    @SprintsNClimbs2 ай бұрын

    Can you used this system on block and brick without the need for insulation boards or polystrene?

  • @zarron221
    @zarron2215 ай бұрын

    Yes you need 2 people floating, but no 1 wants to work 😅¿ Beautiful job sir!

  • @lukethedukewatkins7441
    @lukethedukewatkins7441 Жыл бұрын

    What size beads did you use on this system?

  • @monday7150
    @monday71504 ай бұрын

    Can this system be used on old brick walls that have previously been sand cement rendered and hacked off leaving a lot of dubbing out required?

  • @seedpod107
    @seedpod1077 ай бұрын

    I was watching to look and try and do a beading rain lip in a front wall of bungerlow above lead strip it has sliped down abit of the front door porch so water runds down wall and goes on the rusty metal edge beading lip and where thè lead should be tucked just under it where porch is joined to rendered bourded wall thats where its leaking about 4 meters long how far are you away how much would that be to render a new rain bead lip would be better as i cant move that well after heart attack near 2years ago are you close to clacton on sea

  • @Jazzy-xr1sz
    @Jazzy-xr1sz Жыл бұрын

    Better than k rend?

  • @user-kt8vo7vt1r
    @user-kt8vo7vt1r Жыл бұрын

    Do you do any work in Bolton Greater Manchester?

  • @blakeevans2963
    @blakeevans2963 Жыл бұрын

    Nice to see the gaps mate. Its called pillowing .

  • @Littlelamb2023
    @Littlelamb20232 ай бұрын

    im not questioning your professionalism but i never understand why plasterers never fully sheet of glass or other areas, but painters are ridiculed if they don't. other than that you are a top professional 😉

  • @woodybollox
    @woodybollox21 күн бұрын

    Better to also add stress patches to window corners

  • @kaimanchester8062
    @kaimanchester806211 ай бұрын

    Would this be for houses only or could you use this for park homes?

  • @Bufekana

    @Bufekana

    9 ай бұрын

    You can use it almost everywhere. We use this method on walls(finish) almost 25 years. But you have to know how to do it! Its not that easy.

  • @rustyrocket8765
    @rustyrocket8765 Жыл бұрын

    Is the 5mm gap between the boards really necessary ? I’ve got a builder doing a loft conversion and I’m not sure he left a 5mm gap between the cement boards. I’m worried now as the silicon render is due to go in the next few days

  • @tonyarnold9784

    @tonyarnold9784

    Жыл бұрын

    I can't see why there would be expansion or contraction with cement boards...wood does but not cement board. Maybe ask cement board manufacturers to be sure

  • @user-lt1fx3gd2p

    @user-lt1fx3gd2p

    8 ай бұрын

    ​@tonyarnold9784 what are the cement boards attached to? There's your answer. ( if the wood moves and the cement boards are attached then they will move to)

  • @user-vj7gp6up7q
    @user-vj7gp6up7q Жыл бұрын

    I'm shore you have to wait for it to fully cure before you can primer

  • @beachhut95
    @beachhut95 Жыл бұрын

    I see this all over the place now on new builds looks very nice for six months then get filthy dirty. Can this be painted to refresh the colour??

  • @roryprice7949

    @roryprice7949

    10 ай бұрын

    Jet wash or algaecide cleaner. Simple.

  • @bernardrevill9547

    @bernardrevill9547

    9 ай бұрын

    They're probably a k-rend type render system. I've had this thincoat silicone for about 2 years. It's as white as the day I put it on.

  • @gracebateman777

    @gracebateman777

    5 ай бұрын

    I thought the entire point of this stuff is that it's resistant to algea and dirt etc? That's what the manufacturers website says anyway 🤷🏼‍♀️

  • @erahman95
    @erahman954 ай бұрын

    Where are you based?

  • @mariuszsobczak2087
    @mariuszsobczak20874 ай бұрын

    Better use sponge float 👍

  • @evaldasurbanavicius6780
    @evaldasurbanavicius678011 ай бұрын

    using the wrong trowel for mudding underneath mesh..

  • @shaun2049
    @shaun20498 ай бұрын

    Are the boards bacca boards

  • @karolbianga3631
    @karolbianga3631 Жыл бұрын

    Always 2 men for Top coat

  • @jimbean233
    @jimbean233 Жыл бұрын

    I will stick to skimming looks like hard work 😅

  • @PlasteringForBeginners

    @PlasteringForBeginners

    Жыл бұрын

    Haha fair play pal 😂

  • @markcarniato1567
    @markcarniato156711 ай бұрын

    It looks fin, better not too fick.

  • @mejustanormalguy4742
    @mejustanormalguy4742 Жыл бұрын

    Silicone render is a swine for cracking even if everystep hos followed perfect .

  • @jodyhead9365
    @jodyhead93652 ай бұрын

    Sir Render

  • @rosco7280
    @rosco728010 ай бұрын

    U should have put a coat on ure relveals aswell when putting the corners on then that way it is all bedded in under the bead and not just coating on top of the mesh, that is the worst possible way to do it

  • @trevorrobinson4876
    @trevorrobinson48769 ай бұрын

    Nothing new under the Sun. Sand and cement has stood the test of time. The ancient ancestors who built structures that could not be replicated today used the old school building techniques.

  • @alana9354
    @alana9354 Жыл бұрын

    Far to much messing about Frist coat scratch second coat job done

  • @Bufekana
    @Bufekana9 ай бұрын

    This silicon finish is nothing new realy! Professionals are doing this silicon finish almost 25 years in my country🤷

  • @ianking4713

    @ianking4713

    4 ай бұрын

    Nobody said it was

  • @malcolmbooth5656
    @malcolmbooth56563 ай бұрын

    that house will be green all over in 1 to 2 years, in 5 years it will look terrible unless you start using special silicone paint what costs a fortune, it will onlt stay white for a very short time im afraid, unless like me youknow how to treat your krend etc, with special chemicals,

  • @PlasteringForBeginners

    @PlasteringForBeginners

    3 ай бұрын

    This isn’t K Rend mate…I assume you’re talking about Monocouche Render which is totally different to this 👍

  • @royb2251

    @royb2251

    3 ай бұрын

    k rend doesn’t go green either .. I used it 3 years ago on my daughters house and still looks good 👍🏻

Келесі