Sign Painting & gilding a traditional glass sign, using 12kt. white gold leaf & acid etching
Here is a video looking at white gold leaf gilding over acid etched glass.
I'm certainly no expert on acid etching, but it's always good learning new things!
Here is the acid etch I used:
konastainedglass.ca/armour-et...
Here is a link to where I bought the Ronan Paints:
draggingtheline.ca/ronan/one-...
Visit www.handover.co.uk/ for supplies!
A link to the @happygilder page for tips on gilding:
/ @happygilder
Please consider supporting the channel!
buymeacoffee.com/theletterhead
You can buy this sign here!
www.etsy.com/ca/listing/15962...
any help would be greatly appreciated!
Thanks!
Lewis
Пікірлер: 36
Awesome thank you! :) Can't wait to try a simpler design myself
Wow! It looks wonderful to me! This art is fascinating to me. I'm not convinced I could get my left and right brain to work in harmony for the reverse painting though. Maybe I will give it a try on a small piece. In the meantime, I will stick with 1:12 scratch building and misc. other craft projects. Thank you very much! I subscribed! Lisa
Awesome 🙌👊
GREAT
Nice work... Quite a learning curve painting in reverse, either through a mask or freehand. The missing parts in a leaf surface are called 'Holidays' in the trade. Keep up the brushwork my friend,
Nice work! It's been awhile since I've been able to watch. But now I have to the chance to binge! Thanks for the honesty in the beginning. Without it we're lost! Nice one! Be well.
@theletterhead
Жыл бұрын
That's what I love to hear Chris! Thanks pal
Gorgeous ! Thank u
A really cheap and easy way of getting an tech look is simply add sei matt clear varnish to areas before gilding! We used to do it on pub signs where time and cost need to be low. It looks effective👍
@theletterhead
5 ай бұрын
Thanks Lee, yeah I tried that recently and brushed with wire wool. Came out great and look tk make a video on it soon!
Looks good keep it up!
@theletterhead
Жыл бұрын
Thanks carl!
Top tips cheers
Lovely job mate!!!
@theletterhead
Жыл бұрын
Thanks mate. Look forward to seeing you back.
Nice work. It's awesome. The font is very beautiful. Do you remember the name of it please?
@theletterhead
Ай бұрын
Hi mate, I don't off the top of my head. I made a few adjustments myself to the design on my design software for the stencil. I'll try to find out if I remember when I'm at the computer
I used to do a reasonable amount of glass etching with hydrofluoric acid paste. You had to keep it warn or it would crystallise and not go through a W77 spray gun back in the day. I'm amazed I'm still alive hahahaha shit is so dangerous !!
@theletterhead
Жыл бұрын
Hahaha, yeah I've heard it's pretty nasty stuff. Got to make sure your careful!
🎉🎉🎉🎉⭐⭐🌟🌟⭐
Hello Do you make the masking outlines by hand or with a vinal cutter? As it seems incredibly intricate
@theletterhead
2 ай бұрын
This mask for this sign was cut using a plotter. Was tempted to write is standard reverse but had some tiny panel lines I needed to get right on the outside so just figured I'd use a mask for what areas I could
Write plz.....The Puku Garden
good stuff, but can you explain at what stage and how is the burnishing done. cheers
@theletterhead
3 ай бұрын
Hi Danny, for the burnishing, I would do that once the gold is dry to remove any flakes or parts not properly stuck. Then regild as needed.
@dannymills5540
3 ай бұрын
thanks for the reply. So let dry overnight and burnish..... and I am only using the cheap version - metal gold leaf@@theletterhead
Nice sign! What is that white cut out paper called, that has the letters cut out?
@theletterhead
8 ай бұрын
Hey Morten, That is actually a vinyl mask, I didn't feel like trying to hand gild the tiny panel line, it would never have looked as clean. But it felt kinda silly not using the mask for the letters too, it meant working in a reverse order. But looks super sharp.
@mortenhansen3455
8 ай бұрын
@@theletterheadIt looks great! And check; Vinyl masking. I'll bet it's just another product you can't find in Denmark hehe but I'll try. I gotta try making a letter sign. Thanks and stay creative!
Great job with this one. I primed a piece of junk chipboard and practiced with some ronan, had a bit of trouble getting smooth strokes. Some people suggest sanding the surface and doing a couple primer coats, any tips?
@theletterhead
9 ай бұрын
Thanks jacob, Sometimes the best thing to do is grab the smoothest stuff you can find. Priming and painting definitely help but start with smooth stuff and prime from there. I've worked on wood thats below par and it's just a pain to fix and work on
@theletterhead
9 ай бұрын
Worth paying the extra for sure
@jacobfowler4426
9 ай бұрын
@@theletterhead Thank you!
what kind of paint do you use?
@theletterhead
9 ай бұрын
Hi there, For this is use ronan 1 stroke or 1shot paints
This is jumping so far ahead -----not for beginners ! How do you construct each letter >? don't tell me ---a computer does it for you !