No one explains how to attach the flange to the wall except this video. Thanks for this video.

@Iscaper

3 жыл бұрын

Glad it helped

Thank you for your quick reply! SO APPRECIATED!! We will definitely try blowing air through both ends. Great idea. It's so nice when pros are willing to share their expertise with us who have no clue! We'll get this eventually!

Fantastic tips: using the razor to cut first, checking to see no leak before putting on the flange, and using finger to tidy up the caulk. I think I can do this now! P.S. Thanks for not using any annoying music.

@Iscaper

3 жыл бұрын

Thanks Eva for the feedback and good luck!

thank you for being detailed on what starting position the shower arm should be in to hopefully end up in the correct position when hand tightened.

This makes things crystal clear! Thank you

Very good video. It's simple and straight forward.

Exactly what I needed to know. Thank you, for being straight forward and upfront in the video on how too and what too look out for. This is exactly what type of video I was looking for and very short and simple instructions.

@Iscaper

8 жыл бұрын

+Michelle Dx Very kind, thank you.

@coshgirlify

8 жыл бұрын

Your very welcome

Watched a few videos and so far your the only one that checked for a leak. Much appreciated that advice. Thank you.

@Iscaper

Жыл бұрын

Very welcome!

I'll be doing this over the weekend for my elderly mom so this was an incredibly helpful video! Thanks so much! I've subscribed and definitely liked the video to help you out and I will more than likely be making use of more of your wonderful videos! Thanks again!

@Iscaper

8 жыл бұрын

Good luck and thanks for subscribing.

Great explanations about installing the flange and checking for a leak 1ST before using silicone to adhere it to the wall.

Great video -- clear, concise, and very helpful. Thanks for posting!

@Iscaper

9 жыл бұрын

Thanks, I appreciate the feedback.

After searching over 80 or so sites for "polybutylene shower connection", your;s was the closet to my situation. I'm going to have to rip out the wall in my bedroom to see why my old extension arm just spins and won't come off. Thanks!

great video with all the details and no annoying filler, thank you!

@Iscaper

4 ай бұрын

Glad you enjoyed it!

Very straightforward and useful. Thanks very much!

@Iscaper

8 жыл бұрын

+Jamie Nelson Thanks Jamie.

Great job to the point; yet detailed

Thanks for the feedback.

Thank you for your expertice on simple home repair very helpful and video very nice presentation instruction wise

@Iscaper

10 жыл бұрын

Thanks, I appreciate the feedback.

Very clear instructions. Thank you very much.

Thanks! I am hesitant to screw around with this myself because the connection pipe in the wall seems so far back. I feel sure it hasn't been replaced in years and guess I will just have to get step stool to look inside at what I am dealing with before I begin

That is exactly what I needed to see. Thank you so much.

@Iscaper

10 жыл бұрын

Thanks for the feedback.

Had no idea this was so easy in most instances. Thanks!

@Iscaper

3 жыл бұрын

Thanks Joshua for watching.

I really thought I would have to pay someone to do this, now I feel like I can totally do it and rock it! thank you!

@Iscaper

10 жыл бұрын

You can do it! Good luck.

That was very helpful, thank you!

Intense video man, keep it up👍🏽

You saved Christmas.

@Iscaper

9 жыл бұрын

Thanks Rob.

Excelent video. Thanks for uploading

@Iscaper

9 жыл бұрын

Thanks for watching.

Wow that was a cool brass craft shower head

Thanks for posting this

After blowing out I would also flush the valve body, before reinstalling the cartridge, with water to make sure there are no pieces of debris hanging up in the valve body. Then flush the pipe to the shower head before reinstalling the head. You'll know if what you did worked by the amount of water that comes out of the pipe to the shower head.

Amazing explanation

Thanks Kelly for leaving a comment.

Very helpful. Thanks

awesome video very helpful

I never understood not having hand held showers. So much easier and for cleaning I need it. But I obviously see expensive fixtures in homes, just the head. Guess hand held looks too ghetto in mansions..lol. I guess cleaning is my biggest gripe. Just so used to hand held can't imagine being without. Great vid! Very simple.

thanks, will try that today

@nickolascassius179

3 жыл бұрын

you prolly dont care but if you are stoned like me during the covid times you can stream pretty much all of the latest series on Instaflixxer. I've been streaming with my girlfriend for the last months =)

@otisaldo4178

3 жыл бұрын

@Nickolas Cassius yea, have been using InstaFlixxer for since november myself =)

I appreciate the moderate pace, the lack of background noise/music, and the practical tips (like why I need a flashlight). Also, the tip of using rubbing alcohol to clean the area where something will be adhered. I just subscribed to your KZread channel. Thanks for doing these videos. A senior citizen female fan.

@Iscaper

8 жыл бұрын

+Zoe Z. Thanks Zoe, you just made my whole day!

@zoez.2588

8 жыл бұрын

+iScaper1 And guess what!?? I ran into a snag immediately. I cannot loosen the shower extension arm from the pipe inside the wall. Looks like I won’t be changing out my new shower after all. And I’m really happy to know you enjoyed my comment and it made you feel good. Zoe Z.

@Iscaper

8 жыл бұрын

+Zoe Z. The shower arm should thread into a 1/2" female adapter. Have you tried some WD-40 on the threads and pliers to remove the shower arm?

Very detailed. Thank you.

@Iscaper

10 жыл бұрын

Thanks Michael.

Great . You made it easy. Thank u

@Iscaper

8 жыл бұрын

+Human angel Thanks, I appreciate the feedback.

you are so perfect, thank you

Very neat job 👍

@Iscaper

3 жыл бұрын

Thanks!

Thanks for this video. It looks like the utility knife trick might work.

@Iscaper

Жыл бұрын

Thanks Bob for watching.

Very helpful, thank you. I just hope I can get my old shower arm off, which has probably been installed since 1954!

@Iscaper

9 жыл бұрын

Might want to soak the threads with something like WD-40 before removing.

@Brookside975

9 жыл бұрын

Thanks, will try that!

@Iscaper

9 жыл бұрын

Steven Meyer Good luck.

@toekneelorenzo2942

4 жыл бұрын

Were u able to take it off?

I use plumber putty to hold the flange. Easy to clean and troubleshoot since I am a maintenance tech I do this everyday.

Your info was great. I would have missed two steps in your tips and it would have later been a problem. Thanks!

@Iscaper

10 жыл бұрын

Thanks Thomas for watching.

Thanks.

TY!! a girl need to know this .

@Iscaper

8 жыл бұрын

+TheJazzie6 Thanks.

It is better if you cap the pipe to test for leaks in my opinion. You will have more back pressure. With the method shown it could take longer for any leak to make its way through the threads to be noticeable, not to mention a waste of water. It is also a good idea to run the water before you attach the head to purge any sediment/debris.

Water through the handle? On my shower there is a pipe that runs from the valve body to the shower head. The valve body mixes the hot and cold water then delivers it to the shower head via the pipe. You should have something similar to this. Is your shower a shower only or is there a diverter spout involved with a tub?

Might have to try a pipe wrench. Careful you don't break the arm threads off in the fitting.

Thanks for commenting.

We love all your videos! We were able to replace the handle and cartridge on our single handle Moen shower. Happy day! But it didn't solve our problem---no water coming from shower head. Not a drop. There isn't a seperate shut off valve to the shower. The toilet and sink work fine. What we could see of the valve and pipes from where we replaced the cartridge look good. A little water did come out when we pulled out the old cartridge. ANY IDEAS for what to try next?! Thank you!

I have a shower on my ceiling its call a rain shower its cool and I have a shower spray hose its silver

Good video

The shower panels are beige with light brown patterns, is that what you mean?

Thank you

Thanks a lot for this vid! I had no idea it was this easy! I will be doing my own install instead of calling a professional.

@Iscaper

10 жыл бұрын

Good luck. Let me know how the installation goes for you.

@UltimateOutcast

10 жыл бұрын

iScaper1 Hey um I hve an Exquisete Shower it has one of those removable shower heads but when I was taking a shower it came out of the wall, like I think a small part of the pipe too but I dont think it has ever happend

@Iscaper

10 жыл бұрын

Shroude Valdona Usually the shower arm connects to a 1/2" female adapter in the wall. Hopefully your shower arm didn't break off inside that fitting. I would check that first.

@UltimateOutcast

10 жыл бұрын

I dont think you understand.....its a handheld shower...my mom uses it to clean the shower, so when she turned it on, the whole thing came out of the wall and hit her and the main water came out of the hole in the wall the head, arm and flange are fine but the whole fucking thing came out of the wall v.v

@Iscaper

10 жыл бұрын

Shroude Valdona I watched your video. If what you're describing in the video is correct it sounds like the female adapter in the wall has broken off the pipe from the shower valve. If that's the case it's probably time to call a plumber.

Yes, I remembered those things from your video. I didn't have WD40 so tried 3 in 1. As for pliers, I used every conceivable kind. Either I lack the necessary strength or it was "over installed". The installer has done other work here and he has gone overboard before. It feels like he used "cement" to join male and female pipes! Absolutely no give.

@Iscaper

8 жыл бұрын

+Zoe Z. Might want to buy a pipe wrench. It will give you more leverage. Hopefully you won't break off the threads of the shower arm in the fitting.

That's the trick, to tighten it enough that the curve is pointing down and that it doesn't leak where the nipple connects to the female fitting in the wall.

good stuff yo

So we are dunces! We had a flash of brilliance and realized we needed to PULL OUT to test the handle, not just turn side to side!! So thanks to your great video the cartridge and handle are replaced and now water is running out of the shower head. BUT NOT MUCH. Major downer. We removed the shower head and still the water was just trickling out. The water goes from hot to cold fine. Ideas on how to fix this? Is it water pressure? A clog from the handle to the shower? Some bigger issue? Thanks!

Hi, awesome video! I had to replace my shower arm as over the years it corroded and eventually broke off with the arm thread stuck in the brass pipe bushing. Luckily for me I could remove the pipe bushing and reinstalled all of it and then the arm ended up pointing sideways. I solved this by giving the pipe busing 3/4 turn and everything was straight and leak-proof(pray i did not crack the elbow in the wall). My question is could I have just not removed the sideways arm and then inserted one of those rubber-like washers and then retightened?

@Iscaper

10 жыл бұрын

If you mean like a hose washer for hose fittings I don't think so. I don't think the female fitting in the wall would accept a rubber washer.

Thanks for the great video... Since you're just replacing the shower arm and head, I'm assuming you don't have to turn off the water valve to do that? As long as the handles are in the turned off position, you can change it out. Is that correct? Thanks in advance.

@ccyaltr

5 жыл бұрын

That is correct. Even if you turn on the water by accident the water will come out of the spout as long as the diverter is not closed.

I have water dripping from the shower arm and down my wall I hope this helps

Sounds like there may be some kind of obstruction between the valve body and the shower head in the piping. You might have to remove the cartridge and try some compressed air to blow out that section of pipe. You might have to blow both ways, from the shower head back to the cartridge and from the valve body up to the shower head. Remember to remove the shower head also. Let me know what you find.

Wasn't crazy about the way you attached the flange to the wall with the caulk on the outside like that. I think it looks better to use clear caulk and apply it inside around the arm and under the flange so it doesn't show on the outside. It holds just as well and looks a little neater. Otherwise, nice install.

@Iscaper

10 жыл бұрын

Good tip, I'll use your method the next time I do the replacement.

I saw him wrap the Teflon tape clockwise, which is correct.

any advise for replacing a 40 year old shower arm? I anticipate it may be seized.

Great video! Very easy to follow with clear instructions. However, I have a question: Can you install a 12-17 inch shower arm and then your shower head? Are they all standard size?

@Iscaper

10 жыл бұрын

I've seen longer shower arms that come straight out of the wall instead of angling down, so I don't see why not.

@gvega17

10 жыл бұрын

iScaper1 Thank you!

Thanks for watching.

What if, after you tighten it, it's not pointing down like it should be? Thanks!!!

How tight should the extension arm be? I'm afraid to over-tighten it and crack the pipe behind the wall.

Had trouble using the GE all purpose calk. Wouldn't harden right away lol. Had to sit there holding the plate for like 10 min

thanks

SOOOOO, is this as easy as you make it look???? and if I just need to repair a leak behind the flange, do I need to buy new parts or can I just uninstall, use my teflon tape and reinstall what I already have? In case you didn't guess, I'm not handy, also do I need to turn the water off to do this or just have the shower off?

@Iscaper

6 жыл бұрын

If it's leaking out of the threads on the extension that connect to the fitting in the wall you could try teflon tape and reinstall. If the fitting is leaking you have bigger problems. You don't need to turn the water off if the shower valve is off.

Good video,how can you replace the pipe behind the shower wall,the vertical pipe?With the shower arm off if I take vertical pipe lose where it connects down lower will the vertical pipe come out below? Is there a video?

@Iscaper

9 жыл бұрын

Do you have a leak in the piping to the shower head? If not I wouldn't try and change it because you may have to cut the sheet rock in the wall behind the shower valve to change the supply piping to the shower head, or if you don't have a wall behind the shower you would have to cut the shower wall to access the piping.

@robertdawson1475

9 жыл бұрын

iScaper1 There is a leak behind wall,in the vertical pipe feeding shower head.

@Iscaper

9 жыл бұрын

Robert Dawson Looks like you have a bigger project on your hands now.

I don't understand why they don't make gaskets for the shower flange and the handle and faucet escutcheons. It is hard to caulk these because of the thin edge on all of these parts.

i dont know if you can help me but on my shower all the water comes through the handle...when i unscrew it there is a big hole as though a fitting is supposed to be there, can you help me??

How do I remove a part that I can't budge due to age of the tape/connection? I have tried bpblaster (the strong version according to my local hardware store). What other products can you recommend?

@Iscaper

8 жыл бұрын

+deh jax I've had good luck with WD-40.

my shower arm it sprays out water off from the sides inside of shower arm opening..how to fix?theres a hex typ thingy,i unloosen that?maybe a bad seal inside that?

@Iscaper

3 жыл бұрын

I would try teflon tape on the male threads of the shower arm that thread into the female fitting.

You sure that was silicone caulk you were putting on there and not latex caulk?

MY showerhead was frozen....i found a.strong rod, drilled holes through pipe near threads close to wall fitting. Inserted rod through holes and tapped with wrench until loose and then twisted off with rod. Only solution.

@Iscaper

10 жыл бұрын

Creative solution, thanks for posting.

Do i need a tool to remove the shower head only? water pressure is low and i was trying to clean them up..try to unscrew them but they aren't coming off...Is there are way to clean the shower head without removing it....

@Iscaper

8 жыл бұрын

+Mae Cedillo Some shower heads have a couple of flat spots on the back of the head where you can use a wrench to break it loose. If not, a pair of pliers should work. To clean the shower head the easiest way is to remove it and let it soak in some white vinegar or CLR for a few minutes then brush clean.

If the sprinkle part came off how to do you put that part back on

@Iscaper

3 жыл бұрын

If you mean the shower head, it threads onto the shower arm.

very good, but you only caulked the outer rim of the shower flange.

no matter how hard I try, the head or arm will not come off. Tried wd40 and turning as hard as physically possible but it won't move. ridiculous

@JamalKhaffaf

6 жыл бұрын

snaresallday I had same problem which is caused by rust built up over years. So called a plumber to take some part of the wall to cut the pipe the install a new pipe and shower head .... all that should cost somewhere around 600+ but you can save up on installing the wall your self which should cost you somewhere around 350$ + wall material 80$~ GL

When I remove the shower head I don't have any leaks,I replaced the shower head and the shower arm is still leaking,do you know what may be causing this

@Iscaper

7 жыл бұрын

The shower head builds pressure back along the arm and is probably why you're seeing leaks. Did you use thread tape where the arm goes into the fitting? If so, I would try to tighten the arm another turn.

Its funny how everybody that do these videos never have any leaks after

Did u need to shutoff water in the whole house?

FYI You put your Teflon tape on backwards. But I got what i needed out of the video. I didn't know what the flange was called. I always incorrectly called it a concealing plate.

@jerrymc777

5 жыл бұрын

Backwards? Looks correct to me....

Did you need to turn off the main water in the whole house to replace it?

@Iscaper

9 жыл бұрын

No, but be careful you don't bump the shower valve when replacing or you will get a bath.

My shower arm is in there REALLY tight. Any tips?

@Iscaper

8 жыл бұрын

+colleen pierce I would try a pipe wrench and hopefully you won't break off the threads in the fitting.

I twist and twist but the shower arm doesnt come off' is there another way they are attached behind the wall?

@Iscaper

9 жыл бұрын

Can you pull the flange/escutcheon plate forward and take a look with a flashlight where the shower arm connects to the fitting? It should be a female adapter and the shower arm should thread out counter clockwise. Hopefully the threads aren't stripped and it's spinning in place.

@potatochobit

9 жыл бұрын

iScaper1 hi thanx for the reply I finally got the shower head off, I had to hold the plate and twist the opposite direction. apparently this is called a Self Seal Tub Spout & Shower Arm Trim Plates, there is a plastic stopper inside around the wall pipe. I dont know if someone did this on purpose or broke something and did this as a remedy.

@potatochobit

9 жыл бұрын

potatochobit ok the official product is called sioux chief tomahawk Shower WallNut lowes or ace hardware do not carry this, I want to strangle myself now, lol

@Iscaper

9 жыл бұрын

potatochobit Just watched the Tomahawk video here: kzread.info/dash/bejne/fWiorKOycdesedo.html Looks like the Tomahawk moves the shower arm connection from the inside of the wall to the outside of the shower wall. You may have to call a plumbing supply company to find Sioux Chief replacement parts for your shower.

Was this in a mobile home or a house? Do it matter?

@Iscaper

Жыл бұрын

Doesn't matter as long as the fitting in the wall is 1/2" IPS (Iron Pipe Size) female threads.

how do i remove the screw inside the wall??? ..it is striped

@leocontreras9521

7 жыл бұрын

wont allow me to insert shower arm

My hd shower head took 8 loops around cause it kept leaking. 😖😖. I have been doing this for years.

lol who measured the cut out for that... it is a lil off center.

our shower arm broke off how do we fix that

@Iscaper

8 жыл бұрын

If it broke off in the fitting you could try an EZ out extractor. I would try soaking the threads with WD40 first.

there's no trick, if it get's too tight on the final turn you end up with the thing pointing sideways. If you leave it pointing down it will leak. It's just the way the threads line up.

my shower has male thread coming out of wall??

@Iscaper

8 жыл бұрын

+Aweri Blakely Is it a nipple you can remove then install the shower arm?

@supersonic174

8 жыл бұрын

iScaper1 I don't know what it was I tried to remove it. I just got a female to female joint and that solved it.

Do you have to turn off the water first??

@Iscaper

6 жыл бұрын

No. Just make sure the shower valve stays off.

@M14SINAL0A

6 жыл бұрын

iScaper1 ohh ok....thanks alott my man:)))