U need more make more videos of the rig . Nice 👌 job

Very nicely done. Turned out great 👍

Nice build! It looks awesome!

Really well thought out. Good job guy.

Nicely done

Nice rig build!!

Cool set up

Fantastic work, sir! $1200 bucks and your own labor? That's awesome. Gives me a good idea as to how to build my own. Thanks!

@Markyusishen

3 жыл бұрын

Yeah my own labour. Most time consuming part was building the cabinets and not having a break press. But it’s where I saved the most money .

Nice job!

Nice setup

Can you show how it looks when in use, on a gig or something, would really appreciate it!

Is there any particular reason you used 2x2 hss for some of the skid and not 1.5x1.5 for the whole thing?

you should do a walk around

really nice! how did you paint it?

What is the thickness of the angle iron used for the welder to sit on? 1/8”?

Thing is bitchin. Good work man

Nice work, where does your acetylene tank mount?

@Markyusishen

3 жыл бұрын

I have a piece of 6” channel welded on from the frame of the skid up the back side of the drivers side cabinet with some links from a chain welded on. Right up tight near the welding machine. Top of the bottle is the height of the cabinet when it’s in the truck. I just use two 1” ratchet straps to hold it in.

Hey Mark where did you buy the hinges and handles ? I can't seem to find any online!

@Markyusishen

3 жыл бұрын

I got them off Amazon. Ones I went with are stainless from TCH Hardware. I was having a hard time finding them as well

@meaganlarsonyhjxjjxurixq6399

3 жыл бұрын

@@Markyusishen ok thanks and really good video

What size of tubing and plate did you buy for this build?

@Markyusishen

3 жыл бұрын

2”x2”x1/8” for most of the frame. 1-1/2” x 1-1/2” x 1/8” for the deck and frames for cabinets and machine. 3/16” plate for deck.

@darkwing1018

3 жыл бұрын

Awesome thank you so much for your reply is the cabinets made out of the same 3/16 plate?

@Markyusishen

3 жыл бұрын

@@darkwing1018 oh hell no. Lol. 14 gauge. Nice and light

Mark, on the spacing for the bottles what size (Diameter 7in. or 9in.) bottle do you show in the Video, 150cf or a 200cf?

@Markyusishen

Жыл бұрын

Pretty sure 200cf. It’s the standard industrial size bottle. 5’ tall. Deff not 7”

@s1084098

Жыл бұрын

@@Markyusishen Ok one last question, what did you set your inside width where the bottles go, between the 2" tubes?

@Markyusishen

Жыл бұрын

@@s1084098 I’ll measure it tomorrow. Can’t remember off the top of my head

@s1084098

Жыл бұрын

@@Markyusishen thanks! looks like I'm gonna have to do some adjusting on the skid we are building. You video has been a huge help!

What’re the demensions and thickness of materials for the end gate?

@Markyusishen

Жыл бұрын

3/16” plate for the top. 1-1/2” x 1-1/2” x 1/8” HSS for thr rest of it. It’s kinda heavy. Tempted on switching it out for all aluminum and just have it hinged to the carbon steel. It was cheap to build then and I didn’t have the ability to weld the aluminum when I first built the skid

Hey Mark about how much was the matierals

@Markyusishen

3 жыл бұрын

$1200 Canadian. Metal supply store I purchased from is more on the expensive side too. They have no minimum order sizes and sell to everyone which is convenient but more pricey. I bought 4x8 3/16 for the deck $302 Cabinets 2 sheets of 14 gauge $275 40’ of 2x2” HSS $245 60’ of 1.5”x 1.5” HSS $268 20’ of 1” angle and 20’ 1.50 angle $80 for the lips on the cabinets. All Canadian prices

Fucking nice

What kind of pipe stands are you using where theyre elongated, for you to drive under it?

@Markyusishen

10 ай бұрын

I just used length of pipe instead of sleeve it came with for extra height. You can buy pipe stand extensions though. I know Javelin makes them. These stands I think are GRB.

@HughesMWS

10 ай бұрын

Would you mind writing out a material list?

WHERE DID YOU BUY YOUR REELS?

@Markyusishen

Жыл бұрын

Castleweldshop.net they are Alumareels

What are you floor dimensions if you don’t mind me asking? The ones for inside the box?

@Markyusishen

2 жыл бұрын

It’s 1270mm between wheel wells. 1450mm wide after the wheel wells on tail light end. 1890mm long. 530mm high to get cabinets above box sides

@wolfe9905

2 жыл бұрын

Is the height from the floor? It’s a nice set up! Do you mind if I copy the design?

@Markyusishen

2 жыл бұрын

Height from bottom of skid to bottom of cabinets. And not at all

@wolfe9905

2 жыл бұрын

Why didn’t you put the acetylene holder behind the machine? Just curious, because I see they are commonly mounted there. Also what size tool boxes?

@Markyusishen

2 жыл бұрын

@@wolfe9905 I added my propane bottle and rod oven behind the machine after the video. I didn’t want to lift a big acetylene bottle in that awkward corner of my box with thr truck being lifted. Boxes are a weird size like 30” made them specific size for thr room I had

Remove skid to pull out of garage or do the reels swivel down

@Markyusishen

Жыл бұрын

No it fits lol. Couple inches to spare.

Do not store gas tanks on their sides. Especially acetylene

@Markyusishen

Ай бұрын

The Acetylene is vertical… oxygen and inert gas does not matter if it’s on its side

@natenate2280

Ай бұрын

@@Markyusishen ahh

Why didn’t u just build a bed all that work and it’s still bathtubed doesn’t make any since to me

@Markyusishen

3 жыл бұрын

Worked better for me at this time. Don’t have space to store my box once I take it off. Or means to lift a heavy deck from my garage on to my truck. This was cheap. Easily removable with pipestands if I want my box back if I’m not working. And I’ve never been a fan of short box single wheel decks. I 100% agree with you decks are way better to store tools and work off. When the time comes and I get another truck I’ll be getting a long box dually and I’ll do a deck for it.

@adamw.6488

3 жыл бұрын

Isn't a shitty tub skid tho. These actually can hold a lot of shit in comparison. A large majority of rigs in Canada are this way. We carry a lot more things than a pipeline style tub would hold.