On use to work as a painter. It bugs how people are easy to criticize. Rich does finish carpentry and isn't a professional painter, so instead of criticizing him . People should give advise in a respectful manner. I work as a mason now and I do plumbing once in a while,I might not be the best but at least I'm not afraid to do the job nor is he. Good job man

I appreciate your videos. I’ve been a tradesman ( a GC )for over 40 years and love to learn new things. Anyone who says they know it all are fooling themselves. There is always something new to learn. I look forward to new lessons even through perceived mistakes. Thanks for the vids.

Used our TC Pro for many hours and jobs, but when it stopped I was shocked at how the rubber service ports were made and how easily the Allen key stripped out the rubber on the service ports. Loved this gun until it got stopped up. Normally easy to clean up, but wish they had more solid screw. Oh. 26 of the manual says you can use oil based paints but does warn that static sparking is possible and recommends using a metal pail and/or grounding.

The shock has to do with the flash point of the product being sprayed. Below 100 you should be using the hot solvent Graco Handheld. Some oil based products with a flash point between 115-100 can cause a shock and it has to do with the solvent.

@electricalron

9 ай бұрын

Interesting.

Love your attitude dude. Humble to the utmost. Love how you didn't blame the tool. I'd be petty enough to do that immediately.

Even if they weren’t the results you were after it’s still a good video. You have inspired me to take my company from general contracting to more trim carpentry. I’ve always loved trim carpentry and your videos have helped me so much by giving me extra confidence plus the know how to do new jobs! Keep the videos coming!

Great video...all the suggestions regarding build up of static electric charge is right on point and correct. As an industrial chemist we always considered static charge build up whenever organic solvents are moving through any pipe or piece of equipment. Everything must be grounded before starting any fluid transfer or, in this case, before using handheld sprayer. Using that sprayer in and enclosed room, with oil base paint, is a prime set up for a house destroying explosion if it should spark just when the vapor level reach critical concentrations. Your very very lucky you didn't finish that job with a bang! Another example of this static charge buildup is when they pull tanker trucks into gas stations to refill the underground tanks...they always attach ground wires to the truck and hoses before they transfer the fluids into the tanks. Great videos and keep up the great work!

@ralphvalkenhoff2887

5 жыл бұрын

I agree however, How would he have grounded himself? By touching a pipe? Connection with wire leading outside to a rebar pounded into the ground? And is it only effective during the transfer of liquid?

@dylan-nguyen

2 жыл бұрын

@@ralphvalkenhoff2887 the model he bought is for water based paint only! There is a more expensive grounded unit for spraying oil based paint and lacquers. It say on the box that you can cause a fire or explosion with oil based

@dereksimurphy

6 ай бұрын

It's a water based gun only. I have the ultra pro version which gives you a grounding cord . Far too much hassle so why bother using oil at all. These guns work but the graco quickshot is far better and if at all possible go for the GX 19 versions on batteries where you actually have some control. I'm a tradesman 30 years have sprayed vehicles before, and found the top version of there handheld , heavy ,noisy, messy, very little control but it has plenty of power and should be called a handheld, priming and touch up gun. That's all it is really.

I have the corded version and haven't experienced any kind of shock form it, but I only use latex paint. I love mine and I am very happy with the ease of use, the finish and easy clean up

Thank you, Richard. I bought the Graco because of your videos. I recommended to Graco to consider sponsoring you. Well done.

Love this gun, got it a few weeks ago. Didn't get shocked. Your base looks great!

I suspect the shock is static build up, the paint thinner was likely non mineral thinner

I bought the corded version, works flawlessly! Absolutely love it and it’s been making me a lot of money!

@johnc1280

4 жыл бұрын

Aaron Salvesen using it on kitchen cabinets at all ? And what model # did you get ? Thanksss

Respect for putting up with the pain so that your viewers won´t have to.

I’m going to buy one of those cordless sprayers. Makes life a lot easier. Keep the videos coming

Thank you for all the videos you put out, always good! One question i bought graco handheld sprayer i hated it bc of the pulsing pattern it would create on what i was painting. Did you experience any with this model? Thanks!!

Thanks for the demo! It was a shocking experience... 😬

Thanks for this vid I am planning to get one of these sprayers. Great feedback in the comments on the problem. Love your work great finish

Great video, thank you. However my question is where would I get pants like you are wearing in this video? I really like them.

Very cool, super interested in trying to spray some of my trim jobs. I don’t have much experience with sprayers though and typically have someone else come paint my work

Video footage is so clear and crisp. Great camera.

Do you ever paint trim with a 1st coat prior to installing, then finish with a 2nd coat and/or touch up after installation?

I'm so glad your doing this. I just bought mine from Sherwin Williams. It was great for waterbase clear coat but not the best results on trim paint. I'm sure it was us. I'm going to use it on home projects before I use it on the job sight and look like an idiot cleaning up my mess with no lunch and getting hangry.

@wallacemartin3704

6 жыл бұрын

mr.clean p

@T6Tarek

6 жыл бұрын

I own two of these guns and don't care much for them. I find they spit all over the place

@mrclean146

6 жыл бұрын

Tarek Ashurex yes, that's what I found so far. I hear so much about how good they run and it did with the water base poly but not with paint. I'm hoping it's me. I'm making some doors today and need to spay them. I'm going to experiment at home before and not do it at the job sight. I will get it right......hopefully.

I had the same thing happen with mine. I forgot until watching your video. I did not have it happen with latex although. I am looking forward to what you find out.

@mountaindoosr69

4 жыл бұрын

Mayday Properties Static build up from non mineral thinner usually, all you would need is a grounding strap....no mo shocky shocky 🤘🏻

I don’t know if people have already answered this, but the graco airless gun that can actually handle oil and flammables, they have a grounding connector that plugs into an outlet in order to ground it. I’m pretty excited to use mine soon

Beautiful work! Love your videos.

Your videos are great. I have worked as a construction electrician and construction superintendent all around the world. You’re a top hand by any measure. I would guess a wire to the switch that is bare. I’d send it back instead of trying to fix it since it’s new. You might try rubber gloves in the meantime.

So how long do you wait between coats? And how does this compare to your 360 VSP? Great work and thanks for the vids.

Have you considered a HVLP gun instead? I am a novice trying to paint latex but it goes very slow. I think it is more for small projects like furniture. Any thoughts?

Did you ever get this figured out (re: using oil/solvents in the non-plus models)? Did you return it? Did you buy another?

Would the graco tc pro do a good job (i.e. nice smooth finish) on mdf

Richard, I need to paint the Windsor one 1x6 base I installed in my house. I have vinyl plank flooring and Im wondering the best way to mask off the base so that I don't get paint bleeding on to the flooring? Im thinking a line of frog tape down on the floor up against the base on the floor and then doing 12" masking with cheap tape on top of that? Should that be sufficient?

I love using my TC Graco Pro but I'm curious as to how it handles stains and clear coats like polyurethane? I love it for paint but I'm trying to speed up the time it takes to stain/seal the furniture I make.

@seanmcaleavy2369

5 жыл бұрын

I have used mine for staining and putting on clear coats. It works well as long as you get a fine finish tip. And, of course, sand and tack between all coats of clear.

That little gun seems like a huge time saver. Not only with setup but with cleanup.... On a side note; you never produced more videos on lay out & finishing up that oak coffered ceiling. Please make some coffered ceiling videos!!! Love the channel man...

Great finish. Could you do a video on how you tape the floor to reduce paint getting on the floor. Looks brilliant

@markmurto

3 жыл бұрын

Usually with latex, just before you paint, you wet caulk with a very thin line of clear at the tape edge, and pull the tape while wet. With oil its tougher. You have to use sealing wax and wipe it off real good so it only seals the tape edge. Let it dry. Oil is very leaky. Wax is oil based and dried like oil. Wet caulk won't work with oil.

@brandonbarker6009

3 жыл бұрын

Or just get good with a brush and paint a straight edge ;)

Could this be used for painting a fence and what tip is best

Hi, which flp would you recommend for water based outdoor lacquer paint?

You took it like a champ !

@Parafinn1970

6 жыл бұрын

Legend

@AnonYmous-ny2tr

5 жыл бұрын

Ur mum ben jarmin

So the question I have is do you remove the tape before the paint dries? Sorry for my ignorance Thank you.

Did you caulk the tape during the masking process or did you just apply tape and masking?

Curious if pro painters remove the tape when wet. I was told to always remove it when it dries a bit. Sorry about the shocking but thanks for showing us how it's done.

The TC pro is from Lowe’s so guessing it’s made different cheaper for Lowe’s. Best bet would buy it at like a SW made to last

Thanks for all your cool videos! Quick question. Did you caulk the tape at the floor? And have you ever thought of pre-spraying your product before installing it and then caulking it with a colour mixed caulking?

Try using a raw union to reduce odor from paints that have stout fumes. It won’t eliminate the VOCs but it will take odor away much quicker and the onion doesn’t leave an odor behind. And yes, a grounded wire will take away the shock. Reader above/below me has sent you the link. Good channel. Love the content.

Actually oil based and solvent based material has a special gun called Ultra Max HH, the one you are using is the normal Ultra HH You need to check the manuals again

Would recommend this sprayer for cabinets to get a smooth finish?

I had one it stopped working after a couple of uses.

According to the manual, the unknown thinner was probably not compatible with the sprayer and caused static build up and shock. It says not to use non-mineral spirit thinners.

@mm-xk7pg

6 жыл бұрын

MoneyManHolmes Correct!

@doug.ritson

6 жыл бұрын

MoneyManHolmes: The video for the unit by Graco states that it can spray lacquer. Seems there is a disconnect between the video and the manual, and Richard should give them a call. I own the corded version of the gun and I love it when it works well and hate it when it doesn't.

@mm-xk7pg

6 жыл бұрын

DRitz78 Ultra can spray latex and mineral spirits based products. Ultramax is needed for laquer

@doug.ritson

6 жыл бұрын

m m: Thank you for clearing that up. Appreciate it.

@dontblameme6328

6 жыл бұрын

B-I-N-G-O ! ! Lucky he didn't detonate!

Thats funny, I just contacted Graco two days ago about spraying anti fouling paint with this gun and they told me I could not because of the make up of the paint. Today I came across your video.

Thanks for Sharing with us brother

Yo brotha. Nice vids. I don’t even do shit like that for work or hobby but it’s fun learning just in case my time is called to be the handy man lol. Keep it up

Looks amazing.

It states right in the manual that there is the possiblity of user shocks...Graco ultra can only be used with latex and mineral spirits based products. There is an upgraded gun called the ultramax that can be used for hotter solvent based products. The ultramax is more expensive and comes with a grounding cord, it can be used to spray anything. He stated the paint he was using had been thinned by someone else, that someone else had probably thinned it with a hotter solvent causing the shocks.

Can you send me info on those pants love the knee guard.

I’ve heard some say pre-paint your base. Others say paint in place. Can you give me an idea as to your preference and when one method would be preferred to the other?

do you clauk first or spray paint first?

How did you tape to the baseboard with out the paint bleeding through was there a big gap. In Australia there's never really a big gap it's usually flush to the ground

@h34th1986

5 жыл бұрын

In uk to stop bleeding il tape up then run a thin bead of chaulk and wipe to seal in

Oh! I see the reference re: grounding cord. Good to know!

I like the Purdy, but when you want that smooth finish look spraying is always the way to go. I always spray.

I had the same thing happen to me . Satin impervo with penitrol . I took it back . I used it for tiny spindles and it was an acceptable finish . I should have not worried about using extra materials and just used my old nova airless with a 209 . I was told the brushless model wouldn’t shock but it’s not worth the $500 in my opinion .

Per the manufacturer instructions, you need to use a grounding cord with the "cordless" version of the sprayer. I bought the corded version specifically because the need for a grounding cord eliminates the benefit of the "cordless" model.

@srjr2531

2 жыл бұрын

Could the paint gun turn into a flame thrower if it sparks ?

@dddvision

2 жыл бұрын

@@srjr2531 I can't say for sure, but there's got to be a reason for that grounding cord.

Nice finish on those baseboards. Sure beats painting them by hand.

Which spray tip size do use on your graco ?

How much thinner did you have to run thru that thing to clean it?

I’ve got the ultra max I’ve have sprayed oil with it , no shocks , however the tip guard and thread is different also some sort of plastic, so you can’t use standard extension poles or tip guards, I thought you can not use the model you have for oil,

This has been like waiting for a new Game of Thrones to come out!

I just got mine, it works great on latex paint. I want to use it on lacquer finish to see how it works

@rickderuiter8504

4 жыл бұрын

The Graco UltraHH will not spray lacquer. You will need to buy a Graco UltraMaxHH unit to use for lacquer finishes.

Results look great and reading the comments I assume the shock was from the information provided. Can I ask what state those homes were located?

YEP YOU SURE DID! I got the same gun. I just put a inquiry into Graco on 4/19 and they just replied with this following: "Steve, The material is alkyd based and contains some naphtha. These materials can cause static shock in the not solvent resistant handhelds. Usually if it says alkyd based it will contain a solvent that can cause shocks. I would avoid alkyd base and just make sure otherwise that it states it is non-flammable."

Which city is that in? Looks really nice there.

Thank you once again! Did you figure out why you were getting shocked by the sprayer? Also, for a small job, we have some kitchen cabinets doors, what sprayer would you recommend?

@gudrune

2 жыл бұрын

Instructions say that for this kind of paint, you must use a grounding cable.

Putting all of the other BS aside, you did a beautiful job. The results were nothing less than perfect! If I were the home owner I would’ve said, that is how I would’ve done it! It really looks nice!

Interesting product, great review and decent problem solving. Back in the day (ha) I would've killed for one of these babies. Good review! What did you finally do with the gun?

I have graco 360 any tip nozle recommendation?

maybe nerve pressure in hand. But wow it does require a ground. How is it compared to a hand held low pressure electric sprayer?

Hey man, i own the vsp 360 version of that sprayer and it does a pulsating pattern when it sprays, does this model have a consistent spray? Or is it also a pulsating pattern? Thanks in advance

Are you still using this spray gun? Been thinking about buying one.

Can u tell me what kind of work pants u have? Or sell them in your store..

Wonder if it's good for tub reglazing

How much do you charge for painting trim.

painted over the door stops that are on the trim?

Static buildup?

HA! That commitment tho.... Brings me back to those aftermarket batteries. If you get hurt, who pays the bills?

Looks amazing. How do you prep the area where the wood meets the floor? Looks like it was caulked or something. Very clean.

hi i have qestion please: where did you buy the paper with the glue tape ? i try to find this protect film with the tape but i dident find it thanks yossi

@samwallace8654

5 жыл бұрын

You need to buy a 3m handi masker. Then you just buy a roll of tape and a roll of paper, as you use the tool it puts the tape on the paper, it's right behind him at the beginning of the video, you can also get 42 and 74 inch pull down plastic, one of the best tools I've purchased

@hartmanace2764

5 жыл бұрын

it does not come with tape on it u need the 3M handi masker which applies the tape to the paper as it's being rolled out

Why did you paint over the doorstop brackets?

Dam nice tape job !

Which graco tip do you use ?

I worked as a painter in college (paid my tuition in full). Painters dont get enough love. Nice job man.

@johnc1280

4 жыл бұрын

Chris Stolle nice. Yea painting is an art too. what do you do now for a profession

@chrisstolle5664

4 жыл бұрын

@@johnc1280 A Youth Pastor, associate director of a Childcare facility, owner of a seasonal landscaping company and beginning a side job of building custom guitars. Still look back on painting with good feelings. Helped me through tough financial times.

How do you get such a nice tape line on the floors after removing the tape? We (diy) use high quality tape but never get perfect lines like you did. We're replacing our flooring from carpet to hardwoods soon and I'm going to have to repaint and replace some baseboards. I'm more nervous about that part than actually replacing our flooring.

@kevinwise982

6 жыл бұрын

Hayden I use Frog tape. Nice clean lines.

Did you use a tape dispenser to put the paper down? Or did you run the tape then put the paper down?

Very first clip. House in the back looks.like the pyramids. Nice drone transition btw.

just curious why you just dont get the homeowner to get their own painter. Does it add a good margin for you or is it about being a complete service

Well done

This exact thing has happened to me with graco true coat pro II ! I didn't know Wtf was that, couldn't finish the job ! I was using oil based primer "cover stain". When I was priming it and cleaning it there was no problem, as soon as I started spraying every 2-3 seconds - zap !

Wonder how long it took to mask up set the gun up spray the trim & clean the gun out ... I could have painted it with a brush in 15 minutes

Post another review paint doors!! PLEASE!

Have you ever used the Wagner ?

Hey Richard is the model you have compatible with flammable products? I have the same gun but mine was 699 it’s the graco ultra max. Bought it from acme tools online.

@FinishCarpentryTV

6 жыл бұрын

This one is not compatible with flammable. But It does say it is compatible with oil based. It's weird. Trying to figure it out.

@terryburgess6637

6 жыл бұрын

Could be connected because you’re spraying a flammable oil based product. Mines “hot solvent compatible” which to me says cab spray oil based products because they require (hot solvents) to clean them out . Don’t know much about this but just a thought.

Good video...did u ever find out why it shock u?