I have been using sprocket Deore M5100, RD XT M8000 and shifter SLX for 3 months and the result is going well the problem is the cog of m5100 become loose, it solved by adding spacer on the sprocket

@churchofdirt-mtb

Жыл бұрын

Many thanks for sharing your results 🙂

@robertbarton993

8 ай бұрын

i've had issues with m5100 cogs as well. The lock ring keeps on coming off. I have noticed that the thread is kinda short. So i changed it with other brand 11s lockring Ever since. No more loose lockring

Try using rd m8000 sgs (long cage)

Shimano Deore RD-M5100 direct mount to that hanger works.

@churchofdirt-mtb

2 жыл бұрын

The hanger in the video is a non-direct mount type and yes it works well :-)

I'm not sure about the chain sizing method of largest cog to chain ring plus two links. In the video, you can see that the cage is hyper extended with the chain on the largest cog. I try to avoid that. On the smallest cog, the chain should run about the width of your index finger from the bottom of the mech (and you should engage the clutch). Thoughts?

@churchofdirt-mtb

2 жыл бұрын

Hi Brian, many thanks for your comment :-) Firstly, if the clutch position is off in the video, this would have been a temporary condition, I don't normally ride with the clutch off. (I say normally). So the two link method was the Shimano method for sizing for hardtails on the previous generation of 11 speed systems. (M7000, M8000, M9000). On the M5100 I believe the recommendation (for hardtails) is now 4 links. This being a hybrid approach I had to pick a number. (Although I reckon 3 links will likely work as well). My thought process was to have as short a chain as possible whilst the chain still sits on both jockey wheels in the lowest gear, ensuring as little slack as possible when in the highest gear and on a hardtail this approach has generally served me well. Why try to keep the chain tight? I'm a little old skool in my thinking but better chain retention, less noise, apparently more efficiency. (Although maybe sacrificing chain life). What approach would I take with a full sus? With the rear arm travel extended to the longest point between BB and rear axle, I would probably be tempted to have started with 4 links. More movement of the rear mech through the distance between the rear axle and bb changing to ensure not to put too much work on the clutch but at the sacrifice of chain retention (not really an issue these days) more noise and less efficiency. Hopefully that has gone some way to explain the method behind my madness anyway. I know there are differing approaches with different thought processes, some prefer the shortest chain possible, some prefer the rear mech to sit very close to the cassette in the highest gear.

@ljgmdad

2 жыл бұрын

@@churchofdirt-mtb thank you for the response. I'd just point out that a shortest as possible approach makes sense to me also. But hyper extending the cage as shown in the video is bad and an indicator (to me) that the chain is a bit too short. For what it's worth.

@churchofdirt-mtb

2 жыл бұрын

Thank you for your feedback :-) Would you be willing to share your thoughts as to why you believe it to be bad to have the cage extending to this extent? (To help balance the subject for the readers :-) ).

@ljgmdad

2 жыл бұрын

@@churchofdirt-mtb the derailleur parts will wear faster under high tension. The jockey wheels for one. Also the springs, which will then cause sluggish shifting over time. Multiple bike mechanics have told me they keep chains as long as possible within reason in order prevent unnecessary wear and keep it shifting easily over time.

@churchofdirt-mtb

2 жыл бұрын

Thank you very much for providing information to balance out this subject :-)

Hi, I have a question. I currently ride Shimano XT RD-M8000-DSGS with a Shimano SLX CS-M7000 cassette, 11-42T. I want to change the cassette with Deore M5100 11-51T, will it be possible and should I also change the chain, which is now Shimano CN-HG600-11 (114Link)

@churchofdirt-mtb

10 ай бұрын

OK, so it could work with the rear mech you have BUT I doubt the chain length would be long enough. (Amount of links required would be bike dependent). If it doesn't work then you could swap to a M5100 rear mech but retain your previous shifter. The M5100 is a good rear mech and you can upgrade the jockey wheels to the Uberbikecomponent 12 speed shimano wheels which have ceramic bearings.

Hi, man. I have XT M8000 Medium Cage Rear Derailleur. I want to buy a cassette 11-51 M5100, and chainring 36T. I dont know if in the video you are using Medium Cage so I want to make sure. What do you say about it?

@churchofdirt-mtb

Жыл бұрын

Difficult to know for certain, seems to be a mix of successes and failures but not enough information provided on failures to try and either fix them forward or determine configurations that just wont work. All I can say is, if you find the m8000 rear mech you are using is providing undesirable results, the m5100 rear mech works very well with other Shimano 11 speed shifters, such as the M8000

Will the SG go 11/50T if the B screw has more movement ?

@churchofdirt-mtb

3 жыл бұрын

Hey Lee, just to confirm is it the GS or SGS you have? Also do you know which range of mech? (SLX M7000 for example). Out of interest, which cassette are you looking to use?

Quality video. I believe I have done everything correct. (Chain sizing and what not) I think I may have direct/non direct mismatch which is probably causing the issue

@churchofdirt-mtb

3 жыл бұрын

Can you share a photo of your setup?

@gregm2557

3 жыл бұрын

Just had another look and the xt m8100 now comes with the B link so it can be direct and non direct mount. I have taken the B link out and now I get every gear without fouling the derailleur. Just abit of high and low tweaking and it will be perfect. Thanks for your help. You have gained a very grateful subscriber! Happy riding!

@gregm2557

3 жыл бұрын

Also no chain drop when back pedalling! 👍

Bro is the m8000 long cage good with m5100 cogs 51T?

@churchofdirt-mtb

Жыл бұрын

Difficult to know for certain, seems to be a mix of successes and failures but not enough information provided on failures to try and either fix them forward or determine configurations that just wont work. All I can say is, if you find the m8000 rear mech you are using is providing undesirable results, the m5100 rear mech works very well with other Shimano 11 speed shifters, such as the M8000

I have an xt rd m8000 SGS derailleur, what is the biggest cassette I would bei able to use?

@churchofdirt-mtb

2 жыл бұрын

So the GS (used in this video), Shimano spec as Max 46T (rear) and a capacity of 39T (difference between smallest and largest cog if we simply this to 1x). Obviously I have it working with a 11-51T cassette which is beyond the Max spec and a touch more than the capacity spec. The SGS derailleur, Shimano spec the same Max 46T but a capacity of 47T, which is quite a bit more capacity than the GS used in the video. Obviously I can't guarantee success if you were to use a bigger than 46T cassette on the rear with a SGS derailleur but all things being equal, SGS should work with 11-51T cassette as well. (Keeping in mind b screw tension, chain length + chain quality and full sus vs hardtail).

SLX RD-M7000-GS should work even better?

@churchofdirt-mtb

3 ай бұрын

This was a proof of concept which was shared to help provide the results to others, if terms of what will work on all models of bike frame and rear mech I really cannot advise. I can highly recommend using the M5100 mech with the Shimano XT M8000 11spd shifter though

Hello,,, i have my xt m8000 it seems that my hanger or bracket is to loose the stiffness is gone,, is that normal to an m8000 rd or should i replace the 🔩

@churchofdirt-mtb

Жыл бұрын

Stiffness is done? You mean the clutch force or the spring force? Both are serviceable items so do wear

@tibotsPADYAKatTUKOD

Жыл бұрын

@@churchofdirt-mtb The pivot motion of the hanger shaft is too loose, the stiffness is gone 

@churchofdirt-mtb

Жыл бұрын

@@tibotsPADYAKatTUKOD so the jockey cage is connected to the parallelogram mechanism, this shouldn't have any play. The parallelogram movement is controlled by the cable to the shifter, going from high to low gears and the spring, going from low to high gears. The preceived loose/stiffness of the parallelogram movement can be affected overtime by chain tension, from chain stretch, incorrect chain size and/or incorrect b screw tension. Hopefully I have understood what ypu have meant anyway 😀

1:53 mate I think someone just stole one of your dogs

@churchofdirt-mtb

2 жыл бұрын

hahahaha, nope unfortunately they were bringing the dog back ;-)

What's difference between SGS and GS?

@churchofdirt-mtb

Жыл бұрын

It's the length of the cage which accomodates the range of gears

@twosix_00

Жыл бұрын

@@churchofdirt-mtb For example, if I currently have 1x11 (11-42) and then want to change to 11-46, which would work for both?

@churchofdirt-mtb

Жыл бұрын

@@twosix_00 yep, both will support 1x11 and 11-46T cassettes

Kalo pake hub raze biasa apakah masuk yang 51t?

@churchofdirt-mtb

9 ай бұрын

I'm guessing Indonesian? If so my Indonesian is terrible but if I understand correctly (and apologies if I don't) you are asking if the hub needs changing. If you use a Shimano HG freehub spline now (11 speed), you can fit the Shimano Deore M5100 11-51T cassette.

@bambangyudistira6531

9 ай бұрын

Kalo di banding sram sx lebih baik mana kang?

@churchofdirt-mtb

9 ай бұрын

Full SRAM SX vs Full Shimano Deore M5100, probably the Shimano Demore M5100

or add one chain plus hub chain.. first

can u tray, shiftar xt m8000, using rd and casset m5100 its work or not ?

@churchofdirt-mtb

2 жыл бұрын

It is something I will be trying as although the M5100 RD works well, the M5100 shifter is a bit "mushy" feeling. (Doesn't have the direct feeling of the XT shifter). I'll post a video of my findings when I do get around to trying it so please keep an eye out for it 😃

@SunaryoAzka

2 жыл бұрын

@@churchofdirt-mtb nice i waiting that. i want upgrade my groupset for better

@churchofdirt-mtb

2 жыл бұрын

OK, it does work, though found the downshifting felt mushy, might be my shifter though