Come on guys you can do better than this. It would be more helpful laying out the wiring diagram to align with your test circuit. Also stating that momentary switches are what you would ideally be using. You need to work on the documentation on configuring your products.

Alles super ok. Thank you.

Was wondering… is there an illuminated momentary switch to pair this with?

Hey can you send me a link to the blue Wago terminals?

Question: does Shelly manages to cope with more than 1 switch serving the same light bulb? Say that you have a switch upstairs and another downstairs that turn on the same light. By having 1 shelly in each switch can i still use the switches as before and can I automate them? Or is there a better way? Thanks for the replies, and have a great holiday season.

Can you please explain in details how it works with dual mode button? Is it remembering the last state or always starting from 0% or 100%? I will be grateful for information.

@martinsurrow3812

Ай бұрын

3 Xna. S f

Can i upgrade my dimmer switches with this or do I have to replace them with regular switches?

is it possible to alter the 'slow dim' to a standard instant on/off (when using the standard wall toggle switch). I only want dim settings in automation, and use the wall switch with standard effect (100% on or off)

@djftn

3 жыл бұрын

yes... if you use a single push button... L to sw1.. at first click it goes on, if you keep it pushed it dims to the percentage you want... if you leave the button and push it on an instant it goes off.. then you click again and opens at the same level you have dimmed it before.

when I did this connection my led lamp just flicker at its ON, nothing more, could you please give me some guidance, ty

Servus, ist es auch möglich wie bei manchen Dimmbaren Lampen über schnelles Ein- & Ausschalten Preset Werte der Dimmung anzusteuern? Bsp.: anschalten =100% An, aus, an =75% An, aus, an, aus, an =50% Usw. Und das ganze dann z.B. Immer durchlaufend, sowie einen bestimmten Wert als ersten Einschalt Standardwert zu hinterlegen? Lg und Danke

why don't you just connect one single push button to sw1? it makes everything just with one click... click on, click off, and if you keep it pushed it dims...

I'd like to understand this but I'm unsure what that switch with two switches is? I just need this application for a single on/off dumb toggle switch.

Hey! 👋 Can a rotary dimmer be used with this?

@WouterGrimmie

3 жыл бұрын

No, the shelly does the dimming, you'll need a switch.

@ralfiust

3 жыл бұрын

@@WouterGrimmie actually it can. I’ve been able to install both in series so they work independently of each other

@WouterGrimmie

3 жыл бұрын

@@ralfiust didn't think of that... Good to know!

Can we connect to sw1 and leave sw2 without any wires in case we only have 1 toggle switch?

@CoryFloodwayPrintCo

3 жыл бұрын

I have the same question. Where is Shelly support when you need them? Lol

@dediop

3 жыл бұрын

any solution? i have a 1 gang single switch as well...is it possible ?

@alanduffield5049

3 жыл бұрын

According to the manual: shelly.cloud/documents/user_guide/shelly_dimmer_2.pdf In the configuration it mentions "Button Type" and it sounds like it should be possible: Button Type: • One Button mode: the device is controlled with a single switch. • Dual button mode: the device is controlled dual switch. • Toggle switch one button: the device is controlled by a single toggle switch. • Edge switch: the device is controlled with an edge on/off. Which better be the case as I'm waiting on them being delivered.

@MGL83

3 жыл бұрын

@@alanduffield5049 Any updates?

@djftn

3 жыл бұрын

@@dediop yes it is possible... don t use a switch but a single push button.. read the commens above and you ll find out

Did anyone ever get a response?

I'm glad that I bought only 1 piece of test, it works with maxin 10 w, it overheats after 3, 4 minutes and it stops. I read the reviews just now, money thrown away

@brettemurphy

2 ай бұрын

"Dimming up to 230W"

Why do you use the live wire on the Output terminal here whereas in your wiring diagram you use the neutral? Same for SW1 and SW2 - you mix the colours here and don't specify whether they are live or neutral. This also contradicts your wiring diagram supplied with the device. This video is not helpful

Rff

This simply does NOT work!

I think this might be your worst product.

Crap product