I made one of these in high school metal shop, I'm now 56 years old and still have it and use it. Ours also had a removable storage tray, also everything was hand riveted no cheap spot welding or pop rivets. But I still liked your video it brought back great memories . 😁👍

@InsaneOil

Жыл бұрын

Thanks for the comment. I have come across a few different iterations over the years. This toolbox was definitely build a bit more robust back in the day.

@warrenmichael918

Жыл бұрын

im 48 and i still have mine in my garage too. Made it my 9th grade year in shop class. I also still have my little 2 gun wall hung gun rack with bottom drawer i made in 8th grade.

@InsaneOil

Жыл бұрын

@@warrenmichael918 That's awesome that you still have yours.

@warrenmichael918

Жыл бұрын

@@InsaneOil I dont use it and its pretty banged up with a few coats of chipped and worn out paint but its in the shed with a few very old tools my grandpa used to use. The gun rack is hanging on the wall with my old BB gun that i had as a kid. Nothing fancy just a daisy .177 pellet pump , still works but not very good, kinda like its owner! LOL

@KelikakuCoutin

5 ай бұрын

@@InsaneOilWhat gauge is the sheet metal in this video?

You do nice work you are a great instructor . There was a very Similar project when I went to aviation school ( Air Frame ) in 1982 I still have the tool box it rides around in my old truck .

@InsaneOil

25 күн бұрын

Thanks for the comments. I took a basic metals class in college and built one of these (still use it today). I thought I would bring it back for my current students.

Wow this is crazy. Like the old-school toolboxes. 👍🔧

The level of detail of instructions is astounding, thank you!!

@InsaneOil

11 ай бұрын

Thank you for the comment. Much appreciated.

professional....thank you for this hard work...

@InsaneOil

2 жыл бұрын

Thanks for the comment. Much appreciated.

Thanks so much for this video! It took me back 40 years to high school metal shop class. Take care and God Bless.

@InsaneOil

Жыл бұрын

Thanks for the comment. Much appreciated.

I inherited a sheet metal toolbox from my uncle. I don't know where he got it, I think from his step-father. So I wouldn't be surprised if it is as about as old as galvanized sheet metal can be. The quality is excellent and there isn't a sharp edge on it. There aren't any welds in it; it's all riveted.

Thank you. This was great.

@InsaneOil

2 жыл бұрын

Thanks for the comment. Much appreciated.

J C Sain of Missoula Montana (not sure if I spelled his last name correctly) if you are seeing this I still have your toolbox. Left in my shop here in the Seattle area when you were working on your Jeep. Been trying to get it back to you but have no idea where to look for ya. So J.C. told me he made his toolbox as a shop project in high school. He was our GM for a regular D&D game we played on Friday nights. He also ran a Battle Tech game and had an aquarium with a badass trigger fish in it. The toolbox I have looks pretty much like this one and so I figured if he watched this video he may see this message.

I really like your clear and concise videos.

@InsaneOil

2 жыл бұрын

Thank you for your comment. I try to make them for everyone to understand.

@InsaneOil

2 жыл бұрын

@@jeremynguyen2346 I currently teach woodworking and drafting. In a former position I previously taught metalworking, welding and precision machining.

@InsaneOil

2 жыл бұрын

@@jeremynguyen2346 This type of stuff - kzread.info/dash/bejne/m2GEyceQkqfNoZc.html

@InsaneOil

2 жыл бұрын

@@jeremynguyen2346 computer numerical control

@InsaneOil

2 жыл бұрын

@@jeremynguyen2346 At the most basic level...you draw a picture in the computer, push "play" on the machine, and the machine cuts out the picture on a piece of wood.

This is great stuff. How thick is the sheet metal?

This guy! = CHAMPION

We built these in 10th grade at Hamburg Highschool with Mr. Myers in sheet metal production class... He had one of those super thick shoes..

@InsaneOil

Жыл бұрын

Highschool shop class...good times.

Good work, thanks

@InsaneOil

Жыл бұрын

Thanks for the comment. Much appreciated.

Verry good job 🙆🙆🙌

@InsaneOil

2 жыл бұрын

Thanks for the comment. Much appreciated.

Nice sir

Thanks for sharing

Very good video thank you

@InsaneOil

2 жыл бұрын

Thank you for the comment. Much appreciated.

Great little toolbox where can I find the top handle on Amazon ?

@InsaneOil

Жыл бұрын

I would always buy my hardware from IASCO www.iasco-tesco.com/ I am sure there are other places also.

Excellent video, your video also serves as a reference for me to give audiovidaul help to students. thanks for your contribution. I'm just curious, why place lateral faces, and not make a complete drawer in a single sheet, I would like to know your reasons?

@InsaneOil

11 ай бұрын

I was just following a set of plans that I acquired.

nice vid

Where did you get that handle? Haven't seen them anywhere.

@InsaneOil

Жыл бұрын

I ordered all my parts from IASCO. www.iasco-tesco.com/

Why do you mark with dashes? I use a straight edge and a scribe and I scratch it in.

@InsaneOil

Жыл бұрын

Dashes are easier to show when you are demonstrating to a classroom with 24 students.

I’m really confused on how to make the top. I guess I’m not understanding the length, like 2.125 inches on the ruler.

@InsaneOil

2 жыл бұрын

2.125 inches = 2 1/8"

How do you bend sheet metal to make your sides so even?

@InsaneOil

3 ай бұрын

Good layout techniques and the use of a box and pan brake, as shown in the video.

Subscribed. Thanks for the content. Keep up the good work. בס'ד

@InsaneOil

4 ай бұрын

Thanks for the comment. Much appreciated.

Where do you get the accessories? Corners, hinge, latch etc. Link for those? This would be a great project for my high school classroom

@InsaneOil

10 ай бұрын

I purchase all hardware from IASCO. www.iasco-tesco.com/

@InsaneOil

10 ай бұрын

The site/company seems a little shady at first glance but it has been around for a long time and caters primarily to schools.

@geobrown9413

7 күн бұрын

What?? you still have shop classes? Where are you...lucky students.

sir... what is thickness of this sheet and bend radius??

@InsaneOil

2 жыл бұрын

I believe the sheet metal was 22 gauge.

Good project, what gauge metal are you using?

@InsaneOil

6 ай бұрын

I think it was around 22 gauge.

35:22 a punch mark on those holes will help the students immensely. And give a better result in general.

What software you use to draw it out?

@InsaneOil

7 ай бұрын

AutoCAD

This old box brake is a neat piece of equipment but essentially nobody’s got one. You need to show how this is done with angle, clamps, and a hammer.

@InsaneOil

Жыл бұрын

Agreed. Not a common tool for the average person's garage.

What gage metal are you using?

@InsaneOil

2 жыл бұрын

I think it was 22 gauge that I used.

@benjoseph260

2 жыл бұрын

@@InsaneOil Thanks. I’ve made this with 22 and 24 gage and prefer 24. But, I’ve also reduced width to 11 inches overall as I have convenient access to 12x12 square sheets. One thing I have found is that the top needs to be measured for proper length of hinge edge. Most of the time that edge is 2.0 inches instead of 2.125. This makes the top square up easier with the sides.

@InsaneOil

2 жыл бұрын

@@benjoseph260 Great tips. Thanks for sharing. A skilled craftsman can modify a plan to fit their application.

Hi Insane Oil, Just wanted to know if i could have access to those plans that you are working off. I am currently teaching metalwork and it would help out a lot. Thanks!

@InsaneOil

2 жыл бұрын

Yes, definitely. Send me an e-mail at info@insaneoil.com

@emayn05

2 жыл бұрын

@@InsaneOil hi mate, Awesome video. Would it be possible if i could get the plans to please? thanks.

@InsaneOil

2 жыл бұрын

@@emayn05 Not a problem, e-mail me at info@insaneoil.com

Recommended playback speed X 1.75

@InsaneOil

Жыл бұрын

I recommend playback speed at X 0.50

@twestgard2

Жыл бұрын

I… a…greee…. with… the…. one…. point…. seven…. five…. re…. commm… en…. day…. shun….

@InsaneOil

Жыл бұрын

@@twestgard2 You should check out my latest video. kzread.info/dash/bejne/ZJp20LujhKjTdpM.html

Sir i need this diagram.

@InsaneOil

Жыл бұрын

E-mail me and I'll get you the files. info@insaneoil.com

play this as 1.25 or 1.5 speed.

@InsaneOil

10 ай бұрын

Or play it at 0.5 speed.

@tonyennis1787

10 ай бұрын

@@InsaneOil There's a skit on Mad TV that explores this theme. It's pretty funny.

@InsaneOil

10 ай бұрын

@@tonyennis1787 I’ll have to check it out… maybe I’ll even audition.

I’ll never understand imperial measurements and how you guys still use them, metric makes so much more sense. good job tho

@InsaneOil

2 жыл бұрын

I would same the same thing about metric. It's just like learning a new language.

@DM-zs8go

2 жыл бұрын

I would be willing to switch but my biggest issue is metric doesn’t have aa unit equivalent to a foot/ft, it is incredibly annoying for eye balling measurements, also my work boots are about 12 inches heal to toe so I can use my feet for rough measurements lol.

@InsaneOil

Жыл бұрын

@@DM-zs8go Shoot me an e-mail land I'll send you a printable paper ruler. info@insaneoil.com

@danielboughton3624

Жыл бұрын

If you don't understand imperial measurements how can you be sure? People get all puffed up about metric but really it is a 10ths system and then the only things that go into it evenly are 1,2,5, and 10. Of course when you get to smaller measurements machinists have been using a 10ths system for inches for hundreds of years so no difference there. The win with imperial is you need to take a fraction of something - say divide some distance into some equal sections. It is easier to do this with fractions so 1/2 of 1/16th is 1/32 and 1/4 of 1/2 is 1/8th because you just multiply the denominator. Now try that with metric - what is 1/8th of a cm? Suddenly you are back in the fun land of fractions but your tape measure can't help in as many ways. The other issue as some have noted is that many measurements e.g. a foot just happen to be the size of their foot. A fathom is a typical arm span and so on. When you cross the machinist/carpenter bridge is where you have problems because then you get to remember things like 1/8" is .125 but hey, keeps your brain working well. I can estimate things in my head faster than most anyone can get an answer from a calculator.

Set playback speed to at least 1.5 speed

@InsaneOil

9 ай бұрын

Or you could set it at 0.5

@supabiscuit

9 ай бұрын

@@InsaneOil no disrespect intended. Great information here, just slower than my speed

@InsaneOil

9 ай бұрын

@@supabiscuit​​⁠no disrespect taken…I’m just messing with you.

Muss denn wirklich sooooooo viellllll Werbung sein? Ansonsten ein tolles Video.

@InsaneOil

Жыл бұрын

Die Anzeigen bezahlen die Rechnungen.