Excellent sheet metal tutorial

Thank you Satyendra ji

Real industrial part Great

Hi sir. very good explanation Thank you

super thanku for ur lecture

Well explained

One new subscriber. U explain so well Keep doing it Thank you

@CADxTraining

3 жыл бұрын

Thanks for your comment.

thanks

Sir make more vedios on creo sheet weld plastic ......mold

I used joining process but it's showing error.

Everyone who is having a problem in getting the form right; make the rectangle sketch a lot bigger even if it doesn't feel necessary. Only after that we can get a proper form as shown in the diagram. I don't know how many of y'all will find this useful. But a beginner like me wasted quite a few minutes trying to figure out what I did wrong.

Hi i been not able to execute the join option in the part 12:17 could u please guide me

@CADxTraining

5 күн бұрын

Try selecting other surfaces

Need some sheet work blueprints....

the thickness dimension which you give ,is it a random one or its mentioned in the drawing somewhwere?

@GregEPIC

3 жыл бұрын

The thickness is 0.2

@sidonculous

2 жыл бұрын

@@GregEPIC he gave a thickness of 0.1mm

Sir, where do i get these practice drawings?..And also how do you have the drawing on your left so that you work easily? Thank you for your efforts sir very helpful

@CADxTraining

2 жыл бұрын

Play this video on 1080p resolution and then take a snapshot. This will be helpful.

@omegaalpha5735

2 жыл бұрын

I also do Sam step in my iPad I play on 1080p and take screen shot

While using join tool "feature failed to regenerate" coming . Please clear my doubt. I'm using creo 8.0

@CADxTraining

Жыл бұрын

Send your part to me. email2cadx@gmail.com

I'm getting an adjacent flange while performing a sketch form in Creo 7.0. why is it so?

@CADxTraining

3 жыл бұрын

Take the sketch little out side.

@19arpan

3 жыл бұрын

@@CADxTraining I did. It didn't work

I am trying to modify the depth of the form It is converting in to flat, what is the reason?

@CADxTraining

4 жыл бұрын

Reduce the depth. Most there is no enough room to form the depth.

@harikumark6371

4 жыл бұрын

@@CADxTraining I followed the same procedure u did but were it goes wrong?

How to delete dimensions in Creo 3.0 10.13

@CADxTraining

3 жыл бұрын

Select the dimension and use the delete key

Merge command in not working in my creo,sir

@CADxTraining

Жыл бұрын

Which version of creo parmetric are you using?

I followed all your steps but the join command isn't working for me. It keeps saying 'Feature failed to regenerate'.

@CADxTraining

2 жыл бұрын

Driving surface should be in the same side.

How can get these drawings

@CADxTraining

3 жыл бұрын

In 1080 p resolution take the snapshot of the drawing.

The form can't increase above 30 degree.. What is the reason sir

@CADxTraining

4 жыл бұрын

There is not enough room I guess, after 30 degree. Reduce the depth of the form and try.

@chopperkrepper

4 жыл бұрын

@@CADxTraining sir, The same thing is appeared for me also and reduced the depth and tried but i couldn't increase it to 50°

how do add symmetry

@CADxTraining

2 жыл бұрын

Write down your question in detail. I will reply you asap.

@dhineshakil9877

2 жыл бұрын

@@CADxTraining thank you for the reply how to make symmetry for a line in sketch, i mean in this video the first step you have mentioned. Kind request Post more videos and help us to guide to understand the Engg drawing.

@CADxTraining

2 жыл бұрын

To make a line, there is a symmetric constraint available inside the sketch in creo parametric

Drawings are not cleared to take screenshots. Please kindly give PDF of all these drawings. @CADX

@CADxTraining

3 жыл бұрын

If you play this video on your laptop and select 1080 p resolution, you can take a clear snapshot.

@adityapatil5050

3 жыл бұрын

@@CADxTraining it's not working. I tried on laptop and on mobile also

Where is drawing available because drawing is not visible

@CADxTraining

Жыл бұрын

Play the video in 1080p and check the drawing.

Sir dimensions are not at all visible for practice please show us a snip , so that we can take screenshot

@CADxTraining

5 ай бұрын

If you play the video in 1080p you can see the dimensions.

your tutorials are very good to learn but can you add english subtitle to your videos , because it is hard to understand your pronounciate :)

@CADxTraining

4 жыл бұрын

Sorry about that. Which place you belong?

Why you draw form sketch extent more than sheet metal .

@CADxTraining

Жыл бұрын

Can you repeat your question once again in a detailed way?

@rvignesh4800

Жыл бұрын

@@CADxTraining Sir you did not place the form sketch on required sheet metal then why you put it bigger sketch than that?

@CADxTraining

Жыл бұрын

Can you write the time?

@rvignesh4800

Жыл бұрын

@@CADxTraining time:13:34

@CADxTraining

Жыл бұрын

Yes you need to draw the sketch little outside otherwise you will not get the required result. You try and see.

Hindi language pizz