I once was troubleshooting a centrifugal in a 45 story bldg and three of the attorneys that occupied one of the floors that had no a/c kept watching me and telling me it was costing them money because it was too hot for their employees and clients and they were going to charge my company for time lost. At least one of them kept leaning over my shoulder asking how much longer I was going to be. Finally I got fed up, started putting my meters away, and got up to leave. He asked me what the hell I was doing and I told him...I don't tell you how to do your business and I don't need you or your partners telling me how to do mine. If you get out of here and leave me alone I will finish as soon as i can. He looked shocked but then said...You know, you are right we will leave you alone. Fifteen minutes later the centrifugal was back up and making chilled water. We can only take so much and shouldn't have to tolerate abuse from customers.

@bobboscarato1313

Жыл бұрын

Our job in the HVACR is one of the most important jobs in the world and we should be proud and let nosy people know about. We should also be paid accordingly!

@szpl

Жыл бұрын

What freaks me out when a professional is called, then they start tell you what to do and how to do .... Mostly i try to get educational and dive in the observations and possible ways of their meanings and methods to rule out, how they work and what should i expect. If i am good then they freak out after a few minutes and leave me alone :D

@bobboscarato1313

Жыл бұрын

@@szpl Pretty funny. Good luck; you'll need it!

@WorldPowerLabs

Жыл бұрын

I'm an engineer - I understand how machines work and what can go wrong - but if I hire someone else to service something for me, I'm not going to tell him how to do his job or how long it "should" take. I'll trust his experience and judgement. I may ask some questions out of curiosity, but I'll stay out of the way. Amusingly enough, last time I had someone out to service the furnace, he asked for my help because the job needed 3 hands. No discount for my assistance, but he did give me some good, used spare parts.

@bobboscarato1313

Жыл бұрын

@@WorldPowerLabs I sounds like a good deal. Your attitude is correct. Same here.

The more we deal with people the more we like our dogs lol

@Lewdacris916

Жыл бұрын

true lol but in my case its a cat

@kg4muc

Жыл бұрын

@@Lewdacris916 that absolutely works too 😀

Making service calls for 36 years till I retired I came to the conclusion 90 percent of the customers are great 10 percent and just plan NUTS just my opinion LOL

@catlikepizzagaming8280

Жыл бұрын

That goes in all walks of life, I’ve been in sales including door to door for 10 years, should write a book about some of the looneys I’ve encountered

@chadhardwick9214

Жыл бұрын

And that 10 percent.... Most ppl wouldn't believe how they act...

@eddiekester4125

Жыл бұрын

Unreasonable people with unreasonable expectations - 45 yrs in the HVAC trade. I tell kind people that I appreciate their kindness.

@bobboscarato1313

Жыл бұрын

Very true!

@murkyturkey5238

Жыл бұрын

@@eddiekester4125 45 years in hvac! Dang you’re a tough old man lol

Never let people treat you like crap. There is such demand for quality HVAC pros...you can just ignore and head on over to the next job.

@dinodemauro4855

Жыл бұрын

Big 10/4✔️🐉

@michaelszczys8316

Ай бұрын

A lot like my job I have now. ( not HVAC ) I do a skilled job that it seems no one else can do anymore. I just do it for over 20 years and everybody is happy. Old plant manager used to actually get stupid and give me a hard time over trivial matters. I used to just smile and look at him asking him " are you really sure you want to do that ? "

I am maintenance at a police dept. They have tons of people like the lady you describe. All the new people hired are told, Don't piss Joe off or you'll be the last to get anything from him. I will totally ignore anyone that tries to treat me like a second hand citizen. Air and heat are the worst. One person freezing while someone 15 feet away is burning up and it is my fault. My boss the chief once asked me what we could do. I told him to tell the city to stop doing lowest bid and try to get me 6 units by at least the same manufacture. We had all the controls done about 5 years ago. From some company in Canada. If a board goes bad I have to ship, wait for customs, explain to customs that it is a warranty repair so they don't charge an outrageous customs fee. Glad I have 2 years left. It gets harder and harder to deal with people.

@chuckjohnson919

Жыл бұрын

Right there with ya bro. Talk to you like you're a dog.

@J-Colt

Жыл бұрын

@@chuckjohnson919 I once changed one of the secretaries tire in a rain storm because she had a appointment for her elderly mother. Why? Cause she treated me great and would always try and help me. We've been best buds for 33 years now. I cannot handle snotty people.

@chuckjohnson919

Жыл бұрын

@@J-Colt I've changed tires batteries went to their homes fixed things for them. Treat me right I treat you right. You're a good man Joe

@J-Colt

Жыл бұрын

@@chuckjohnson919 Sound pretty good yourself Chuck, thanks. I do a lot of computer work on the side and take care of a lot of them with that. Slowing down now though ;)

@szpl

Жыл бұрын

I was thinking that kind of cheap-assing is just a local speciality here... Apparently not :(

I just wanted to say that you are one of the absolute best HVAC technicians I have ever seen, love your work ethic and how professional and polite you are and have seen you go that extra mile many times. I must have watched around fifty of your videos and enjoyed every one. When I was a young man I used to be my father in law’s helper and learned how to do the sheet metal cutting, bending , securing and wrap plus install trunk lines etc. I should have stuck with him and learned the trade, stupid kid you know 😂 but I hated being under houses and in attics, didn’t bother him because he was a tunnel rat in the Green Berets in Vietnam. May he RIP a great man who I looked up to.

That air handler taller than a 10 ft. stepladder would scare me away! I would want a scissor-lift. The "Doctor" probably got a degree on a grading curve😆 That was slick finding that leak finally on a Schrader Valve👍 Great video! 🇺🇸

My instructor in college who was and still is a state HVAC inspector in KY told me. “You don’t have to put up with crap.” And in this instance that applies. Good for you standing up for what’s right and being professional and civilized. Let me do my job and I’ll get you fixed up.

@barronweir123

Жыл бұрын

I think this includes bosses

It gets hairy when you don't want to lose work from the property management company but also don't want to deal with the crazy tenants. Great video

Yes sir Curtis life is too short To fight with people that don't understand what you're doing and why you're doing it. And it doesn't matter how many times you explained to him it's not your fault but the other guy did it's still your fault! So I won't take those jobs anymore either, I don't need the drama!

I hope you told that management company they need to be sending the Doctor the bill? Her improper dust management is what is causing the issue (and doing who knows what to the lungs of the people working in there!)

@jamiepatterson1214

Жыл бұрын

The work that doctor does should be done under decated exhaust fans to keep the dust from the cutting/grinding from entering the building. Plus, anyone working for that doctor should be wearing some type of mask while doing the work. That goes for any customers entering that building. Given the dirty condition of that coil, that doctor needs a professional air filtering system installed.

@jamesbaker429

Ай бұрын

State of that air cooler some ones been saving money using it without a filter ,my old neighbour did that then complained in hot weather his system running flat out for warm air ,we had ice cold air and system running for short bursts we clean the filters every two weeks high customer count 10000 a week.

The one thing I learned years ago in business, you can't please everyone. Some you can't please at all. There is one in every crowd, and you found one. God Bless

@dinodemauro4855

Жыл бұрын

So true

My family does the same. Too busy to babysit and sometime deals with the “ I know more than you”. My brother calmly replies “ then why aren’t you fixing it”. He’s slowing down. Gets harder as you get older. Love your persistence

If a customer or in this case tenant treats you badly or nasty or is angry at you i would not blame you for walking away. I have walked away from abusive clients before. My stress is worth more then one job. Big fan of your channel. Respect

Good joss for putting up with the Doctor. I've been in IT for over 15 years, and Doctors, Nurses, and Lawyers always have severe "cranial-rectal impaction" when it comes to working with other professionals.

@calculator1841

Жыл бұрын

Those three plus accounts. They really are miserable narcissists.

@szpl

Жыл бұрын

LOL, so true on the other side of the big water too... I have friends who are in making furniture and carpenter/joiner jobs (i hope those are the correct translations for their job), and they have a regular price and they have an extra charge for "doctors, lawyers, policemen" :) Regarding policemen, respect to who really come to serve and protect, but they have their hands pretty much tied, so majority of the staff here is just there to get a living from a job where practically nobody is sent away.

@johncole3010

Жыл бұрын

One word said becomes an assumptive dialogue with nurses.

To echo the STEM Mentor; I’m an electrician. I’ve run into so many customers who say “I know what the problem is and this is how you should fix it” or “all you’ve got to do is” or even better is the “I saw a video where a guy did such and such so why are you doing such and such” to which I hold my tongue for the most part. I also did a stint as an hvac tech for 2 years. I’ve had days where I’ve gotten in my van after saying “then you know how to fix it and don’t need me”. Patience only goes so far some days.

I had a customer like that one time, it was the store manager at a staples. i was there to work on the alarm system and she was making it impossible to do my job. i got pissed off an called the project manager, i told him i wont go back if she is there lol. next time i showed up it was a diff manager, but she was on the phone with him trying to micro manage. Some people are just nuts, and are so incredibly miserable they will try to jam up a stranger.

Curtis, I am in the electronics business and not HVAC, but I ALWAYS learn something from your videos. It has saved me, and my customers lots of money. You have the right tools and the right attitude. You should NOT take that from any customer, any vendor or any company. There will ALWAYS be more work for techs like you. God Bless.

I am glad and happy you put your feelings out there. I used to work for a large medical equipment manufacturer servicing their equipment at Doctors premises. I have met with what I can only describe as abuse for not fixing equipment faster. I got so annoyed with one customer that I told him "I want to do my work properly as I cannot bury my mistakes like you can". That was the last job.

@stemmentor9700

Жыл бұрын

Think working around medical staff “many Drs” is a PITA as well as college deans. I’m an IT Security guy now, and medical and college environments are the worse with attitudes. Love your comment about burying them. “Truth hurts”. 🤣

@xj31

Жыл бұрын

I'm a mechanic and I saw that line used with a doctor once. He was not amused. I sure was!

@bobboscarato1313

Жыл бұрын

Well said! I just sent a letter to one of my doctors for prescribing the wrong medication. He told me one thing it does another. I'll be firing him soon; I've fired other doctors before; they're treated like gods! They ain't!

@danielmullane933

Жыл бұрын

I'm going to remember that response,good for you!✌️

Blower wheel sounds terrible 😔 probably packed also....

That’s right!!! You are REALLY good and it would be their loss! Thank you kindly sir. Thank you for your VALUABLE videos!!!

I was saying denture room as soon as you pulled the filter! Hell on filters

Damn, Curtis is badass!!! Good stuff brother! You are the most polite and well mannered tech I've seen on KZread and at the same time you will stand your ground. Love it!!!

I’d tell the property management company that I have a strict muzzle policy. That they tell their tenant to keep their mouths shut otherwise I walk.

Glad it wasn't me. I would have asked her how she would have felt if a customer complained they had been to three other dentists and how none of them got it right.

@fvrrljr

Ай бұрын

*HAHAHAHAHAHAHAHAHAHAHAHAHA*

Good for you Curtis!

Good job Curtis!! No one deserves to be treated like that, especially when you're trying to help them. Let her find someone else.

@dinodemauro4855

Жыл бұрын

She won't! Her attitude proves that 😆🤪

That's what I love working for yourself, you can tell them to call someone else and move on. 👍

I appreciate the videos man it’s very motivating and encouraging! You do great work we need more like you!

You are absolutely right to fire customers. Hopefully they realize that they are the problem. You definitely don’t have to put up with bad behavior. Everyone deserves to be treated with respect. Both you and the Dr. have taken time to be well educated in your respective fields.

Thanks again for taking us 🇺🇸 along with you definitely 👍 enjoy your thoughts and comments, as you explain the problem and how you figure it out thanks 😊 😀 👍 please 🙏 keep 😊 safe

I hope that you check the blower wheel. I might be caked as well.

@mediocretroll2842

Жыл бұрын

Definitely - up there would be a pain to get out and clean for sure

You can’t satisfy everyone, and that’s ok. Sometimes it’s better to just walk away from those kind of jobs.

Good for you, being nice to people matters.

Good for you Curtis no need to take that garbage from people you are trying to help.

I like the way you work, a professional in all areas👍

good job Curtis some people seem to forget your there to try to help them you did right by telling the property management company you have a job to do on there behalf

Might take a look at the rattle trap. Sounds like the blower veins are impacted as well.

@obama7325

Жыл бұрын

by that do you mean the blower wheel

She was probably huffing all that denture dust for too long, messing her up.

@michaelszczys8316

Ай бұрын

I heard that some people take old dentures ( or steal some ) and burn the material and huff it to get high. How much effect without burning?

Omg Curtis, I was cracking up at the end. Some people just don't get how easy you can walk away lol.

Keep up the excellent work. People just do not know how to talk to one another.

I do IT work and I will say that Doctors are some of the most unreasonable people I've ever dealt with.

yup learned from Dad, we are installers though, but, you GOTTA read people. My Dad has worked 6 to 7 days a week most his life running hvac company, I've heard him SAY A LOT OF TIMES "Get someone else, not interested" Gotta take the ones worth taking and walk when the walking is good.

In a nutshell, that's the reason why I left my last job. It was our own management who wouldn't leave us alone and let us do the job we were responsible for. The company was constantly changing management, and every time they did, it was like we had to "prove" ourselves all over again. And I had enough.

Yep, you don't have to put up with shit from other people. Walk away, word gets around and they soon get the message when no one will work for them! Keep up the good work.

Really can't understand why if your there to fix a problem that they go outta their way to become a problem some people don't have enough to do I guess but good analysis of regular filter replacement Curtis and maybe the next service call you'll be appreciated be careful and stay safe my friend God love ya

Good for you Curtis, you always do right by the customer! I can’t stand when people are like oh I’ve had x amount of other companies out here and they didn’t fix this that and the other thing. Well I’m gunna do it right to the best of my ability and don’t ya just love helicopters 😂 nice work Curtis!

@garrysalis4312

Жыл бұрын

Customer is always right 😂😂 . You always get a few of them, good ones who are pleased to see you make up for it 👍👍

Curtis you don't need customers mistreating you after all the work you do. Sometimes you need to fire them! I did that a few times when I was still working; you don't need this type of aggravation! At this point I'll skip the vulgarity! lol

One of the best on the internet

Great videos.They need a 5”pleated filter on that bad boy.😜

I remember a customer long ago who made dentures; had a large system with thick filters. It needed replacement/cleaning virtually daily. Horror job!

Thanx for vids but please consider sharing more of your thought process with us non pros! More narration on the troubleshooting process and explanation would be great!

Glad to see you are using a “kneeling Pad”, it a great investment 👍.

Curtis please get a one man type drywall scaffold to remove and clean that coil. Good way to twist your back trying to balance on a ladder. I hope those employees are aware of the hazard from acrylic dust. OSHA should pay her a visit. Needs an approved filter system . That scaffold rents for $55/day $165 /week at home depot

@Lewdacris916

Жыл бұрын

takes too much time to set up and tear down, he was only on the ladder for an hour or so. not worth transporting it and all the other logistics

@hughholt121

Жыл бұрын

@@Lewdacris916 A one man roll a round scaffold takes ten minutes at most to set up . He injures himself he is out of business.

@Lewdacris916

Жыл бұрын

@@hughholt121 fair enough

I’m impressed!!, You were right, there was a leak!!! 👍

Yes, I agree with your closing proposition. "Leave me alone and let me work". I would add there is a better way than just "leaving the tech alone"...but it is first up to the homeowner to step up and be competent. That means different things to different people, but here's how I do it. First, I have done the work to become a very DIY competent homeowner with high skills across a number of trades (carpentry, plumbing, welding, sheet metal, tile, woodworking, cabinetry, electrical and electronics, and yeah, I even have my EPA cert.) - I have for almost forty years done most of everything myself - like keeping my 34 year old HVAC system running without a single outside service call in my 27 years of owning it. I have made many repairs - control boards, heat exchangers, blower motors, inducer motors, wiring harnesses, LV transformers, ductwork, you name it - I've fixed it. I'm not guessing about this stuff - on my unit. I know it inside and out, from the register through every inch of duct, piping, supply, wiring, and inside the unit. I have manuals, schematics, spare parts, and a maintenance schedule. Pretty much ditto for every piece of hardware on my property, too. Funny, I'm rarely caught in a crisis with my infrastructure, either. However, when I do need to engage the trades, the first thing I do is have a polite conversation about philosophy of repair. #1 rule: NEVER call "in a rush..." I try to give one-month minimum lead-time for anything - often more. This means pay attention to my unit when it IS working. It means planning and budgeting as a habit and a life cycle. Many symptoms show up long before failures happen. Homeowners just need to pay attention, educate and do preventive maintenance. IME, few do. #2 rule: When I call, when they say "hello XYZ HVAC" I always introduce myself, and QUESTION #1 is always, "So, is now a good time, or can I schedule a time that works better for you?" If I schedule a call, I ALWAYS call back on time. Never stand up a tradesman. EVER. Don't call at lunchtime. Don't call at 4:53 p.m. etc. And, if I use more than a very few minutes of their time on the phone, I offer to pay them for their time. I do not presume it is free. Most decline this payment, but I offer anyway. #3 rule: When we talk, I first establish rapport. I explain that I am not going to be unreasonable. I then cover stuff like roles, responsibilities, limits, expectations, as well as nuts and bolts like access, scheduling, preferred payment, rates, materials, etc. I make VERY sure to listen carefully to the tradesman and make sure he or she is someone I can work with. I also try very hard to be someone they WANT to work with. It takes both - something many homeowners conveniently seem to forget. I do all this BEFORE I get into the details of the scope of work. If the person doesn't have time for this approach, I politely close out the call. They're not the one. #4 rule: When discussing scope of work, if I have HARD DATA on equipment failure, I supply those facts. i.e. "The problem is a failure to answer the call to heat. The thermostat is calling properly, the inducer motor starts, but cycles out after a failure to fire three times. I've checked the flame rollout, manifold gas pressure and the safety switch function. The problem is intermittent. It occurs more on wet days. I have checked manifold pressure, recapped the control board and replaced a microswitch. No recent changes to our gas supply, but I cannot locate the problem." I do not give half-assed diagnostic opinions I read on Facebook or Google...i.e. "I think my control board is bad" or "the unit is low on Freon". IME, you could ask 100 homeowners what's wrong with their air conditioning and about 90% of them would confidently claim their unit was low on Freon. #5 rule: I believe that "Work with" means we can be honest with each other, and that we possess inherently similar philosophies and approaches to excellence and quality (which are two different things, by the way). I need someone who is present, focused and has a basic ability to communicate in a civil and efficient tone. I need someone who respects the skills I possess, and who sees that as an advantage, not a threat. I know what I know, and I am not afraid to say what I know. Even more I am not afraid to say, "I am not qualified to say, as I don't have that skill", when appropriate. Likewise, if a tech says to me "I'm not sure about that", that's actually good. This means he/she is humble enough to admit limits too. In my experience, the guy who always has "the answer" generally has some of those answers wrong. I want someone who is skilled at LEARNING, not just an acorn-hunting blind pig parts changer. I can change parts myself. #6 rule: AFTER establishing rapport, and discussing process, materials, labor, timelines and challenges and scope of work, etc., I always politely give the tradesperson the option of opting out of the job. And, IF I have burned an hour of their time, I insist on paying them for that hour. If they opt out of the job, fine...no hard feelings. If they accept the work, I make sure to progress along MY part of the timeline and expectation line, and I try to TRUST them to do their part. Virtually every one does, and often more. #7 rule: Before we handshake and do the deal, I write down a summary of what I believe we have agreed upon. I go over that in bullet point form. I get agreement from the tradesperson. I promise to hold up MY points. I extend grace to him or her - saying 'Now this is a framework - if conditions change, we'll talk about it, because surprises do happen, right?" That way they know if we find something unexpected and legitimately outside of the scope of our discussion, it is not going to be an emotional explosion by the owner. I think this makes the tradesperson's day a lot better. Lower stress, too. In my experience, by the time I've worked with people like this, I almost NEVER have surprises. With even this cursory weeding-out process I've described, with only one exception in close to 40 years I've never ever had a problem with my interaction with the trades. Moreover, the work they've done has generally been far above average. Not too surprisingly, many of the trades people I came in contact with became friends with whom I've worked and even interacted with in social settings. Amazingly, they always seem to want to show up at my job first thing on Monday morning, too. IMO the problem with "the HVAC trade" is not so much the HVAC trade. I think it takes a little effort by the homeowner / business owner to be a good customer. That includes a little educational effort on our part. All this goes a long way towards making the tradesperson's day a lot better. Do that, and it gets better for everybody. Or folks can be jerks - like this angry doctor with whom I am sorry you had to contend.

Some people have been scammed by so many repair people they begin to think everyone is out to get them. Be professional and honest and a good reputation will get you far. Unfortunately you can't please everyone and they want to take out their frustrations on you or anyone in striking distance. Never take crap from anyone especially if it isn't your fault. (Unfortunately some people will also act like jerks or hard done by in order to garner sympathy and get service for a reduced price as it has worked for them in the past). From one Curtis to another Curtis, keep up with the good work.

This setup clearly needs some better filters. This lint catcher is clearly not enough to deal with such dusty environment.

It sounds like you did the right thing. The issue I run into from time to time is the workman that will not (or maybe can't) discuss the repair with me.

@obama7325

Жыл бұрын

if you are a tenant they might get in trouble for telling you

actually have friends in dentals labs.... most have dual or 3 stage filtration on the air. With large graduating filters. not a single filter.

Walk.. if you are good you will have all the business you can handle.

Now that I'm studying HVAC, I'm very proud of myself about how I treated a tech when the a/c stopped cooling in an old apartment I was in. Showed him where everything was, and put waters in the front in the fridge and told him he was welcome to go in and grab a drink and take one home, then let him work. He ended up making conversation the whole time while I was working on my computer.🤣🤣🤣 Uno reverse card.

Anyone who hires you gets a gem!

I love when u can fire ur customers…..BYE BYE BERTHA!!! Take my skills where they are appreciated 💪🏽✌🏽great work Curtis !!!

Zero abuse…it’s that simple 🤷‍♂️

That is why your tool bag has a handle on it, you can pick it up and walk away. There are always other jobs. Well done!

I had a customer in a small office where they did accounting for several Midas Muffler shops. Their filter was completely clogged with dust from the NCR paperwork.

Also sounds like the blower wheel needs cleaning. I once had a mouse chew thru the paper filter and get sucked into the wheel, obviously causing the fan to be severely out of balance. This eventually broke the welds on the motor’s spider mount and caused it to drop into the fan housing, locking the rotor. I replaced the welds with self tapping machine screws and she ran another 10 years 24/7. All this to say whenever I hear a fan out of balance I inspect it right away.

Would the no rinse coil cleaner help? They need a dedicated dust recovery system if they don’t have one

I used to get customers like that while doing appliance repair.

I had a lady tell me once you are the 4th guy here WTF are you going to do? I said leave good luck, then her husband ran out and apologized and begged me to find the issue.

That is so out of line to be confrontational with someone that is coming to help you. If I need someone to repair stuff at my home. I always offer a hot or cold beverage depending on the season, clear the area ahead of time where they need to work and say if you need anything please let me know. I ask and listen to their advice on home maintenance, thank them for coming and give the person a cash tip, and imagine that, when you need service again it's prompt and honest. You get what you give. Always be kind, it goes a long way. Great videos!

@mitchell8204

Ай бұрын

We love the customers like you. It’s a breath of fresh air.

In that case after brushing coil I would have used the spray on evaporator cleaner. Have a great day. The last 15 years I worked commercial refrigeration. Lots of winners.

@762531971

Жыл бұрын

Yes I was wondering if coil cleaner would have helped but I also would be afraid the drain lines would be plugged up.

We call them alternate universe customers!

You go boy! Hey I subbed again as I am signed in on my other name. I do enjoy watching your videos. 👍🏻

I once saw a sign in a business that had several different prices for Hourly labor. Examples: 1. leave me alone $10, 2. watch me $15, Constantly ask questions $20, 4. help me $50. I think they also had a busines card with that on it. Looked like that dental shop needed an in room air cleaner or they can pay you much more than they would to buy and maintain an air cleaner. I have one for working with sheet rock work where it draws the sander air through water to capture the dust; beats breathing it.

I got to where I left work because of a lot of reasons, attitude and nasty crap and there were some contractors I quit working for because getting paid in a decent time. I never ran out of work. Finally worked strictly on burners on large boilers and usually didn’t have to deal with any crap. Just knees started hurting from kneeling down working on some burners.

That system needs an improved return air system and a better intake air …. Good luck 🇺🇸👊🏼🪚🔨👊🏼✌🏼🇺🇸

respect hard working people!

I've had issues with the infinicon going off on shradders due to oil residue when disconnecting hoses. I always bubble test the cap when it's loose on the port. This will tell me if it's leaking without contaminating the shradder. Even when not leaking it goes off. The inside of the caps will have a bunch of oil when there leaking. But just my experience

That blower motor didn’t sound the healthiest on that air handler. Curtis I have fired several clients over the years, does wonders for mind knowing you’ll not have that headache again. Never need to put up with abuse, life is too short not to be happy.👍🇨🇦

They need a better system too vent all that stuff or catch it better before it gets into the A/C SYSTEM

Some people just look to vent. It takes a strong tech to stand up to some people with though personalities. I like it cuz the angrier the person the quicker they are to spend money it seams. I've had a couple BDR reps folow me in my day. Makes for an easy upsell. Anyone can fix a plugged coil, it's up to you to change her perspective or her day to day life as premium tech.

Thanks for the video sr. Quick question, What’s the superheat or subcool you look for on a system?

I see you've switched leak detectors. Thst one is pretty good 👍

I'm just starting in this business and my first call as a solo maintenance check up and a coil that was caked just like that. Almost a centimeter thick dust and grime. Almost killed their whole system.

Wow, what a dirty coil. And then have to put up with an angry person. Being in business is LOTS of fun !

Yes working with the public is a pain but every now and then you will have a good day

I had a feeling the coil would be plugged based off of the type of dust they are generating and the merv 0 rating of that filter they had in there lol 😆 I like to use viper coil cleaner spray can with a pump sprayer and a shop vac with a brush tip on stuff like that.

My favorite trouble call was when the person on the phone kept refusing to tell me where the building was since he had what he called an expensive service contract. He said I was a clown and he was going to call my manager to get me fired. He finally told me the town and building name. I quickly adjusted the outdoor thermostat interlock that was keeping the boiler off. That priest agreed all was good. Was that absolution?

Hell yeah don't put up with that BS!

Good job Curtis, Some people are just not happy about a lot of things, especially with all the depression and crime going around.

@NW_drew

Жыл бұрын

The depression is self induced and not an excuse to act negative towards others. Anytime someone explains depression to me, I ask, “what do you do with your free time?”. They always reply, “I watch Netflix, play video games, watch the news, scroll through social media, snort coke on weekends”. Well, their is the issue. Crime going up is inevitable due to recession, poor education, low wages etc but again, shouldn’t be an excuse to treat others poorly. Never live your life in fear because it will hold you back in life but always be aware of your surroundings to live another day.

@johnwalker890

Жыл бұрын

Okay sure, not doing what you think ,but whatever.

@KenKen-ui4ny

Жыл бұрын

@@NW_drew Political feuding is another reason why people seem so depressed and moody these days. No one thinks in the middle of the road anymore. They are all about one side, and attacking the other. But still like you said, that's no excuse to be belligerent towards those who are trying to help you out, like a HVAC repair tech.

The fact that the 5 other companies didn't bother to use a little blue or some soapy water the check the valves and caps ,amazes me.

Need a van tour/setup, I like to see other techs setup

I see you're a bulldogs fan! Hell yea brother!!

You ain't gone yet 🤣😅😂 Treat people how you want to be treated ...

Oh that was Doctor "Karen".

If you're ever in Kansas, I'd insta-hire you ;-) some people are just mad because they didn't get enough hugs or whoopins as a kid

Good for you ! You are a great Tech . There are plenty of "nice" people out there . Let someone else deal with the other 10 percent !

I'd walk away too . Not all BUT you ought to deal teachers. I have alot more good ones than bad