Excellent workmanship! The implementation with the tools you have on hand and little consumables deserves praise.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Amazing! So simple and easy to execute; but so ingenious at the same time. Wish I had seen this before purchasing new planer blades. Thanks!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

What a beautifully elegant solution!

Wow! That is just so clever! You’re brilliant!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

BIG BIG THANKS to show out this trick.

Great idea! Thank you for sharing and your hard editing work!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Loved that sacrificial block idea on the table saw.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Супер! Отличная идея! Спасибо за Ваши видео🙌

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Absolutely brilliant and self reliant 👏👌👍❤😀😀😀😀😀

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

This one blew my mind man! What an awesome and great idea J.

@j-woodworking9573

3 жыл бұрын

Thanks friend. Always be safe.

@youtukang

3 жыл бұрын

😊🤝🤝🇮🇩🇮🇩🇮🇩

Ingenious idea. Thanks for sharing

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Thank you for the great video, so simple and effective.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@glennschatz8389

3 жыл бұрын

@@j-woodworking9573 you make some of the things you do look so easy, yet I always look for seemingly easy but always expensive ways to do the same thing. You have nothing but my respect!

Really smart ! Nice job J!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Clever. That would work for planer / jointer blades and also for my garden shredder. Thanks for posting.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

I have tried to sharpen a Makita planer blade like that and it sharpen excellently so thank you for the knowledge

@j-woodworking9573

3 жыл бұрын

I have had no problem with it so far. Happy to hear it gives good solution. Thanks for watching sir.

Very helpful. Thank you. :)

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

볼 때마다 느끼는데 정말 내공이 대단하십니다! 감사합니다~^^

@j-woodworking9573

3 жыл бұрын

감사합니다.

Great idea 👍

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

ingenious idea with the double slots for the angled grinding!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Una buenísima idea y muy bien ejecutada , afilaste las dos cuchillas juntas , con un excelente resultado,un saludo cordial y por supuesto un gran like desde Narón, Galicia (España)

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Thank you for video.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Thank you, Good job!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

If you make the block a little wider, then you can have three slots, that way all the blades will sharpen/wear at the same rate. As is now one blade has slightly more material removed, because you sharpen it more (it is supporting the block on the one side when you sharpen two different blades). I like this simple design.

@youtukang

3 жыл бұрын

🙏🤝🤝

@j-woodworking9573

3 жыл бұрын

If you make it very accurately, that will be perfect. Thanks for watching sir.

GREAT ! Thanks!~

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

suggest longer abrasive paper because in this set up the ends of the blades cut slower/less than the middle which is always on the abrasive. If the slots in the wood jig loosen with shrinkage and they may, it can be fixed with wedging a thin piece of some material to firmly hold the blades. A third groove for the third blade would be a good upgrade, so that all three blades can sharpen the same amount and be done at the same time.

Tienes mi 👍 buena idea.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

بارك اللة فيكم

Nicely done & great idea J! However, I would recommend that you get a blade guard for that planer. Your fingers are way to close to that spinning blade and all it takes is one slip for disaster to occur! Just my opinion...........

@j-woodworking9573

3 жыл бұрын

Sorry about that. I'll keep it in mind. Thanks for watching sir.

Great easy way to do this. I’m going to try it too.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@geraldnovakowski7692

3 жыл бұрын

@@j-woodworking9573 did the sharpening work good? Do the blades cut good? Where did to get the blade magnet tools from?

@j-woodworking9573

3 жыл бұрын

Yes, the jig works pretty well. No problem with the blades sharpened with it. I got the blade hight setting gauge at a local shop here.

@geraldnovakowski7692

3 жыл бұрын

@@j-woodworking9573 what is the make and model of the blade height setting gauges?

Good!🙂👍

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Excellent! What magnetic knife setting gig is that?

Smart!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Thanks will try that out

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

I was going to buy a new set of blades for $70 but then i found this. Must try

Хорошая идея. Для лучшей заточки нужно использовать длинную ленту наждачной бумаги - не менее 1 метра. Под бумагу положить стекло. Наждачную бумагу нужно хорошо натянуть и закрепить по концам. Лезвия можно закрепить в приспособлении с помощью двух винтов по дереву с каждой боковой стороны приспособления. Концы винтов затупить для усиления прижима лезвий. Винты вкрутить под углом, чтобы они прижимались перпендикулярно лезвиям. Алгоритм заточки трех лезвий: точим сначала два лезвия (первое и второе) на 50%, затем одно-первое вынимаем и ставим третье. Точим третье на 50%, а второе будет уже заточено на 100%. Вынимаем второе и ставим первое лезвие. Точим до 100% первое и третье. Успехов вам!

good~~

@j-woodworking9573

3 жыл бұрын

감사합니다.

정말 창의적인 방법입니다. 저도 한번 해봐야겠어요. 그전에 일단 대패부터 사고...ㅠㅠㅠ

@j-woodworking9573

3 жыл бұрын

시도해볼만한 방법입니다. 이 방법을 알고난 후 제가 직접 하고있습니다. 감사합니다.

Great invention, I don't own a jointer/planer yet, but sharpening the blades looks like a chore. I wanted to comment about cutting those grooves/dados without the riving knife. I had a kickback accident with my table saw last week, the first in 5 years and I was making a cut similar to the one you did, with only 1/8 in. of the blade exposed and a riving knife attached. It hit my hip like a bullet and turned it purple. It really caught me by surprise, fortunately, the micro jig grr-ripper saved my fingers.. 😅 Now I know to stand to the side when making any riskier cuts.

@j-woodworking9573

3 жыл бұрын

Thanks for comment of your experience for us sir. Thanks for watching.

@charlescote8391

3 жыл бұрын

Pretty sure you cannot make those cuts with a riving knife in place . At least not on my saw. Guessing they perform several potential functions, including keeping cut wood from closing due to stresses in the wood and grabbing the blade. Cuts like these are not thru and i am guessing are unlikely to close on the blade.

@kahoycrafts

3 жыл бұрын

@@charlescote8391 Good point. J is a pro so I'm sure he's doing it safely. 👍 The riving knife on my saw has a position for non-thru cuts, and my zero clearance insert has an opening for the knife as well, so I never take it off unless it's a dado stack. I just wanted to share my experience as it was pretty recent and kind of unexpected. I'm also extremely careful and methodical with my work and tools. 😅

@charlescote8391

3 жыл бұрын

@@kahoycrafts michael...stay safe and methodical. It is best, especially around saws. Maybe i need to update my saw system.

@garymcmullin2292

Жыл бұрын

late comment but this is a situation that reminds me of the usefulness of a good push stick which will act as a positive block to kickback objects.

👌👍👊

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

👍👍👍👍

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

What was the grid for the 1st sandpaper

Wow

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

😊😊😊😍😍😍

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

That is a great idea. What are those tools you used when setting the blades?

@JorgeSanchez-ex4mf

3 жыл бұрын

www.amazon.com/Adjustable-Magnetic-Planer-Jointer-Vernier/dp/B07KQSR7SL/ref=asc_df_B07KQSR7SL/?tag=hyprod-20&linkCode=df0&hvadid=309763890402&hvpos=&hvnetw=g&hvrand=8965815330190494962&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9027639&hvtargid=pla-607812425188&psc=1

@j-woodworking9573

3 жыл бұрын

Thanks for your kindness sir.

Show de bola amigo, meus parabéns, a partir de agora farei sozinho a afiação das minhas laminas, Deus o abençoe, sucesso e abraço

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Very smart! You should still bring the blades to be ground once in a while, if one blade is sharpened more than the others the spinning head will start to vibrate.

@j-woodworking9573

3 жыл бұрын

That is right. Thanks for watching sir.

This is a simple solution for my problem. I have a electronic handplaner, and the blades are small. This is the why.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

You're clever

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

한국은 대패날 연마비용이 비싼가요? 저는 브라질에서 목공하는중인데 30센치 대패날의 경우 한국돈으로 2000원 정도로 연마가 가능해서 보통 연바를 보내는 편입니다.

@j-woodworking9573

3 жыл бұрын

여기서도 날 1개에 3천원, 3개에 9천원으로 저렴합니다. 그러나 멀지 않지만 다녀와야하는 번거로움과, 가공업체 입장에서는 너무 작은 돈이라 반가워하지 않고, 그쪽 사정에 따라 하루 이틀씩 기다리라 하기도 합니다. 제가 직접 집에서 연마해보니 날을 탈착 연마 장착 모두 해서 15분이면 총분하고요, 연마상태도 만족합니다. 감사합니다.

이런 방법 처음 봅니다. 다음에 갈일 있으면 하번 해봐야겠다.

@j-woodworking9573

3 жыл бұрын

감사합니다.

날 다시 끼울때 사용하는 좌우 2개 도구는 무엇인가요?

@j-woodworking9573

3 жыл бұрын

장비 살 때 함께 온 날 높이 세팅 게이지입니다. 목공 전문 쇼핑몰에서 찾아보면 될겁니다. 감사합니다.

What if your jointer has odd number of blades for example 3 blades, what are you going to do with the one that is left over? Make a dummy blade?

@nickyork8901

3 жыл бұрын

I wondered that, but you can alternate in pairs to make sure they all get the same number of strokes each, for even sharpening. Would need to mark the blades not to get them mixed up. Essential that they are all sharpened the same amount.

@j-woodworking9573

3 жыл бұрын

I sharpen two first. And I take sharpened one from the jig and put the unsharpened one in the slot again. Sharpen again. I don't think there will be vibration because sharpening would be very very small amount. Thanks for watching sir.

@johnstarkie9948

2 жыл бұрын

3 slots in the jig.

Degree ?

two slots but three blades. confident they are all sharpened evenly?

@j-woodworking9573

3 жыл бұрын

I agree with you. I sharpen two first. One of the sharpened knives and the unsharpened one second. The other one of first sharpened knives and the second sharpened one. I don't think this way of sharpening makes major problem. The amount of sharpening is pretty small. Thanks for watching sir.

What manufacturer it your machine?

@j-woodworking9573

3 жыл бұрын

JET. Thanks for watching sir.

You shouldn’t tighten or undo the bolts from one end to the other... you should alternate from one end to the other, otherwise you will bend your knives

@ianplant6330

3 жыл бұрын

The correct way is to work from the centre outwards,alternating left and right.

@j-woodworking9573

3 жыл бұрын

Thanks for your great solution sir.

제가 그 빌어먹을 데우시에 손톱 2개를 날렸죠...ㅠㅠ

@j-woodworking9573

3 жыл бұрын

죄송합니다.

This way... or get a Felder/Hammer with with Silent Power

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

ОК

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

No guard when using the planer, and watch where his right hand is as the wood exits the end of the cut!! And sharpening one blade twice is not a good idea, the blades will be of balance!!!

Why can not we buy such blocks ready!!? I can not find anything on Ebay or Ali etc.. Every hardware store should offer such blocks ready. Then better made of plastic. And possibly with benefits. E.g. four adjustable wheels in the corners, which ensure an absolutely uniform grinding.

단차 안생기나요.. 한쪽이 뜨네요.. ㅠ

@j-woodworking9573

2 жыл бұрын

저는 지금도 잘 사용하고있습니다. 영상에서는 이따금 문제점이 보이기도 합니다. 아이디어만 차용하시면 될 듯 합니다. 감사합니다.

@way-of-joiner

2 жыл бұрын

@@j-woodworking9573 넵 감사합니다! 많은 공부되었습니다!

안녕하세요 목공일기님 현재 목공방을 준비중입니다. 자금부족으로 인해 복합기를 고민하고 있습니다. 헬리컬날과 일반날중 고민을하고있습니다. 일반날 복합기를 사용 하시는데 결과물에 대해 만족하시나요? 일반날과 헬리컬날 기계가격이 약 110만원 차이가 나서 고민중입니다....

@j-woodworking9573

3 жыл бұрын

목공의 가장 중요한 장비중의 하나가 대패라고 생각합니다. 저도 비용때문에 평날을 선택했지만 후회하고 있습니다. 언젠가는 헬리컬로 교체할겁니다. 시작할 때 조금은 부담스럽지만 헬리컬로 구매하길 추천합니다. 작업성능에서 헬리컬이 월등하게 우수합니다. 제 생각이었습니다. 감사합니다.

Theme song is like toram online

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

나무가 유격이 있을텐데 날각이 맞나

@j-woodworking9573

3 жыл бұрын

가능한한 홈을 빡빡하고 깊게 파면 발생하는 유격을 최소한으로 할 수 있지 않을까요. 저는 큰 무리 없이 사용하고 있습니다. 제 방식이 완벽한 정답은 아닙니다. 아이디어만 채택하면 되겠습니다. 감사합니다.

Tout à fait nul c'est pas de l'affûtage ça ,s'il y a une marque dans les couteaux comme c'est souvent le cas le fait de passer sur la toile émeri ne va pas l'enlever ,il faut les affûter avec une affûteuse adaptée

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.