Sharping garden tools: snips and lopers, with eze-lapz hones.
Жүктеу.....
Пікірлер: 58
@rebeccamartin23994 жыл бұрын
Once again the You Tube community made my life easier, kinda like on line neighbors with helpful hints. Many Thanks!
@loud_laughter2 жыл бұрын
Quick. Easy. Too the point. I watched 5 different videos. All kinds of production values. Yours was the best. Saved me time. You should link to the products in your description though because you can get paid for that.
@geico1975
Жыл бұрын
Me too man, I thought this one was very informative, and would love those sharpening files he had. I used Smith's retractable diamond coated steel rod sharpener (SM DIMD PCKT SHP) seemed to work just as good I guess, I mean way sharper after the fact for sure:)
@AJ-bf6hw11 ай бұрын
Thanks. I've been asking my husband for years. You can probably make this video a 5 minute video. Thanks again 😊
@lhaaa1059 Жыл бұрын
Thanks !! Ordered the eze-lap set because of you. Also liked your attention to saving the blade metal by not being anal about the burrs !!
@lindajacobs55324 жыл бұрын
Thank you so much! I now can prune as well as when they were new.
@darrellmann74682 жыл бұрын
O mate great info I look after whittling ham Hall Norfolk and those tips you gave will benefit me immensely many top man u now your stuff cheers
@squange204 жыл бұрын
Very good advice, thanks.
@extremereclusefallows57795 жыл бұрын
I just went into my garage, grabbed my Dremel and sharpened my pruning tools. Wow! Makes a huge difference. Like brand new.
@ravenmooore
4 жыл бұрын
What attachment should i use?
@toreckman8899
Жыл бұрын
Yup.
@TechnologyRescue3 жыл бұрын
Great Tutorial! Thank you.
@LBB1172 жыл бұрын
Thank you for posting!
@Hahehhwgajshah72726..4 жыл бұрын
Dismantle your secateurs when sharpening them.Clean & lube them while you're at it.
@Meedav2 жыл бұрын
Good Job....Much Appreciated .....Thanks!
@sandysue2023 жыл бұрын
Awesome...going outside to sharpen loppers and a pair of snips. Thanks so much!!
@lydiarose29 Жыл бұрын
Thank you for great video
@lolly.createshelfcarrillo51094 жыл бұрын
Thank you very much great demo, very helpful. 😊
@queeneywarren94742 жыл бұрын
Thanks very well done
@MSCAMP1162 жыл бұрын
Thank you!
@gritskennedy50073 жыл бұрын
Thank you
@desireechoate7583 Жыл бұрын
Wow 777 likes! I almost don’t want to be the one to “ like” to mess up the magic numbers! Lol
@johanvandam23654 жыл бұрын
I think it is better to take them apart for beter control an do not forget de-rusting
@TheOmnipresent125 жыл бұрын
Lots of good tips here! Just some friendly advice if more for the not so regular sharpeners out there... consider wearing gloves when sharpening such tools to protect yourself from getting tetanus! Tetanus enters the body through a wound or cut. It doesn't happen a lot but surely is worth it to be careful considering the symptoms. Symptoms can include: Stiffness of the neck, jaw, and other muscles, often accompanied by a sneering, grinning expression. Difficulty swallowing. Fever. Sweating. Uncontrollable spasms of the jaw, called lockjaw, and neck muscles. Painful, involuntary contraction of other muscles.
@hhdunlap
5 жыл бұрын
Gardeners need tetanus shot every 4-5 years, much more frequently than the 8-10 years recommended for the general population. Gloves should be worn for all gardening tasks, but thorns penetrate frequently.
@queeneywarren94742 жыл бұрын
I just wanted you to know thank you I did it like you said very good
@glasswinder4 жыл бұрын
If you slip stitches hurt too.
@SlyDawg951 Жыл бұрын
Where did you purchase the files you were using?
@loisamurray96775 жыл бұрын
Ok. Thx
@craigrussomusic Жыл бұрын
Clear easy to follow technique demo. Wear some gloves though, bro!
@SimonPeters5 жыл бұрын
And the big ones are ‘loppers’, not ‘lopers’. Good video. Thanks.
@MrBiggz-cq6ux5 жыл бұрын
It's amazing these guys that come in here and try to tell you how to do the job. They just can't wait to drop in and share how much they think they know when they don't know Jack sh*t.
@jeannekinney3754
5 жыл бұрын
Dick ...what’s the point of your comment?
@SimonPeters
5 жыл бұрын
Dick Meyers , are you saying you don’t like the video?
@youpattube13 жыл бұрын
You pronounced loppers as if it were spelled low pers. Loping along, as you pronounced it, means gently running or trotting. The correct pronunciation is as if it were spelled lop pers. You lop a branch off, or cut it.
@lechandler40415 жыл бұрын
Why not take them apart, clean and remove the rust, sharpen and reassemble them?
@trev3411
5 жыл бұрын
Yes folks do take their tools apart for thorough cleaning. But most of the tools I sharpen at events are well used: dirty and rusty, so taking them apart is pretty much not an option.
@skyone4950
4 жыл бұрын
Ain’t nobody got time for that 😄
@keeganhurren99316 жыл бұрын
You don't sharpen the back of the blades it meets with the flat surface on the other side that's how it cuts
@trev3411
6 жыл бұрын
Yes, I agree you don’t “sharpen” the back/inner side of the blades of bypass pruners... you “clean” them, and most likely with the same tool you sharpened the bevel. You’re removing gunk, sap, and large nicks. Call it what you like.
@peterford93695 жыл бұрын
My biggest complaint with loppers is the bypass is so faint that after a year or so of very little use they won't cut all the way thru the limb. They barely have a 1/16th of overlap, so the blade won't cut all the way thru. How crazy is that.
@trev3411
5 жыл бұрын
Unsure what the issue is with your loppers. However I have found all-metal loppers, as pictured in video, really don’t hold up well at all. I have disposed of mine.
@loisamurray96775 жыл бұрын
How often should I sharpen then?
@trev3411
5 жыл бұрын
More important is wet cleaning, then drying after most uses... not putting them away wet after use... With that done, I sharpen mine about every 2 months with light use... after each heavy use.
@WatashiOcin Жыл бұрын
asmr?
@19Photographer764 жыл бұрын
Great job but how about an updated video?
@OGMizen4 жыл бұрын
'These will cut your FINGERS OFF!'
@TricksterQuicksterEditor4 жыл бұрын
how did i get here from memeulous?
@terrystockstill2515 жыл бұрын
I have a sharp edge on top flat on bottom with a ridge in the middle
@OnceUponAnotherTime
5 жыл бұрын
I believe you have an "anvil" style pruner. He is sharpening a "bypass" pruner. Bypass works like a scissors, but only the top "scissor" is a sharp blade. The bottom one is just a stiff jaw-like thing that braces against the stem, stalk or branch. The top "scissor" slides against the flat side of this jaw (confusingly, also called an anvil). The one you have, as you describe it, the blade comes straight down on top of the anvil. It doesn't slide against it. Your anvil-style pruners probably have a wider anvil than the ones shown here to make room for that groove yours has. If you didn't *have* that groove, your cutting blade might not cut through the last bit of stem or stalk or branch. The groove ensures it slices all the way through. .
Пікірлер: 58
Once again the You Tube community made my life easier, kinda like on line neighbors with helpful hints. Many Thanks!
Quick. Easy. Too the point. I watched 5 different videos. All kinds of production values. Yours was the best. Saved me time. You should link to the products in your description though because you can get paid for that.
@geico1975
Жыл бұрын
Me too man, I thought this one was very informative, and would love those sharpening files he had. I used Smith's retractable diamond coated steel rod sharpener (SM DIMD PCKT SHP) seemed to work just as good I guess, I mean way sharper after the fact for sure:)
Thanks. I've been asking my husband for years. You can probably make this video a 5 minute video. Thanks again 😊
Thanks !! Ordered the eze-lap set because of you. Also liked your attention to saving the blade metal by not being anal about the burrs !!
Thank you so much! I now can prune as well as when they were new.
O mate great info I look after whittling ham Hall Norfolk and those tips you gave will benefit me immensely many top man u now your stuff cheers
Very good advice, thanks.
I just went into my garage, grabbed my Dremel and sharpened my pruning tools. Wow! Makes a huge difference. Like brand new.
@ravenmooore
4 жыл бұрын
What attachment should i use?
@toreckman8899
Жыл бұрын
Yup.
Great Tutorial! Thank you.
Thank you for posting!
Dismantle your secateurs when sharpening them.Clean & lube them while you're at it.
Good Job....Much Appreciated .....Thanks!
Awesome...going outside to sharpen loppers and a pair of snips. Thanks so much!!
Thank you for great video
Thank you very much great demo, very helpful. 😊
Thanks very well done
Thank you!
Thank you
Wow 777 likes! I almost don’t want to be the one to “ like” to mess up the magic numbers! Lol
I think it is better to take them apart for beter control an do not forget de-rusting
Lots of good tips here! Just some friendly advice if more for the not so regular sharpeners out there... consider wearing gloves when sharpening such tools to protect yourself from getting tetanus! Tetanus enters the body through a wound or cut. It doesn't happen a lot but surely is worth it to be careful considering the symptoms. Symptoms can include: Stiffness of the neck, jaw, and other muscles, often accompanied by a sneering, grinning expression. Difficulty swallowing. Fever. Sweating. Uncontrollable spasms of the jaw, called lockjaw, and neck muscles. Painful, involuntary contraction of other muscles.
@hhdunlap
5 жыл бұрын
Gardeners need tetanus shot every 4-5 years, much more frequently than the 8-10 years recommended for the general population. Gloves should be worn for all gardening tasks, but thorns penetrate frequently.
I just wanted you to know thank you I did it like you said very good
If you slip stitches hurt too.
Where did you purchase the files you were using?
Ok. Thx
Clear easy to follow technique demo. Wear some gloves though, bro!
And the big ones are ‘loppers’, not ‘lopers’. Good video. Thanks.
It's amazing these guys that come in here and try to tell you how to do the job. They just can't wait to drop in and share how much they think they know when they don't know Jack sh*t.
@jeannekinney3754
5 жыл бұрын
Dick ...what’s the point of your comment?
@SimonPeters
5 жыл бұрын
Dick Meyers , are you saying you don’t like the video?
You pronounced loppers as if it were spelled low pers. Loping along, as you pronounced it, means gently running or trotting. The correct pronunciation is as if it were spelled lop pers. You lop a branch off, or cut it.
Why not take them apart, clean and remove the rust, sharpen and reassemble them?
@trev3411
5 жыл бұрын
Yes folks do take their tools apart for thorough cleaning. But most of the tools I sharpen at events are well used: dirty and rusty, so taking them apart is pretty much not an option.
@skyone4950
4 жыл бұрын
Ain’t nobody got time for that 😄
You don't sharpen the back of the blades it meets with the flat surface on the other side that's how it cuts
@trev3411
6 жыл бұрын
Yes, I agree you don’t “sharpen” the back/inner side of the blades of bypass pruners... you “clean” them, and most likely with the same tool you sharpened the bevel. You’re removing gunk, sap, and large nicks. Call it what you like.
My biggest complaint with loppers is the bypass is so faint that after a year or so of very little use they won't cut all the way thru the limb. They barely have a 1/16th of overlap, so the blade won't cut all the way thru. How crazy is that.
@trev3411
5 жыл бұрын
Unsure what the issue is with your loppers. However I have found all-metal loppers, as pictured in video, really don’t hold up well at all. I have disposed of mine.
How often should I sharpen then?
@trev3411
5 жыл бұрын
More important is wet cleaning, then drying after most uses... not putting them away wet after use... With that done, I sharpen mine about every 2 months with light use... after each heavy use.
asmr?
Great job but how about an updated video?
'These will cut your FINGERS OFF!'
how did i get here from memeulous?
I have a sharp edge on top flat on bottom with a ridge in the middle
@OnceUponAnotherTime
5 жыл бұрын
I believe you have an "anvil" style pruner. He is sharpening a "bypass" pruner. Bypass works like a scissors, but only the top "scissor" is a sharp blade. The bottom one is just a stiff jaw-like thing that braces against the stem, stalk or branch. The top "scissor" slides against the flat side of this jaw (confusingly, also called an anvil). The one you have, as you describe it, the blade comes straight down on top of the anvil. It doesn't slide against it. Your anvil-style pruners probably have a wider anvil than the ones shown here to make room for that groove yours has. If you didn't *have* that groove, your cutting blade might not cut through the last bit of stem or stalk or branch. The groove ensures it slices all the way through. .
have a snap-cut type
Robert, it’s pronounced ‘easy lap”.
Huh?
Secateurs not "snips"...
@calvinstulip
5 жыл бұрын
Here in Australia we call them "swillorienogs."
@Rbcaul
3 жыл бұрын
@@calvinstulip 😂
That's dumb