Shark is one of the world's biggest and most advanced helmet manufacturers. Mat stops in at their French factory to see how they go about creating some of their top lids.
Жүктеу.....
Пікірлер: 23
@andrewedmond77384 жыл бұрын
I have two sharks, 1 full modular and 1 full face. Brilliant helmets. Great information Mat.
@52277074 жыл бұрын
Normally we refer factory as a manufacturing facility, btw the video shown like the structure is a distribution and r&d hub instead of a real "factory".
@rigo46084 жыл бұрын
great show guys, thanks !!!!
@Marco-cl9pb4 жыл бұрын
The need to replace the helmet after falling by itself it's just a mith... With nothing inside to make it absort any energy like it's supposed too (unless it had a watermelon stored inside), the helmet will be fine unless it's a really bad drop and cracks the outside shell which is unlikely
@WolfgangVonKempelen838
4 жыл бұрын
Good luck
@donaldsoncole30954 жыл бұрын
I had no idea that SHARK was this committed to safety and tech with their products! I live in Maryland and would love to try on some helmets, but no product in the State of Maryland!!!
@davidsmolsky957
4 жыл бұрын
Donaldson Cole order from revzilla. Free returns
@donaldsoncole3095
4 жыл бұрын
david smolsky - Thanks for the tip !!!
@crm25077774 жыл бұрын
I like shark helmets and have 2,just love the fit Chips and scratches to the shell do not weaken the helmet considerably That’s why Arai sell specific helmet touch up paint
@coolhandpuke3780
4 жыл бұрын
Yea I've got an old ish S900 and it's one of my better fitting helmets..
@crm2507777
4 жыл бұрын
Coolhand Puke yeah I’ve got a Shark Raw and Vancore and love them both
@edpaoloestrada1002 жыл бұрын
Is there anything i can do to avail the warranty of my shark skwal 1? I really dont have idea where to or whom to contact. It was bought in australia by the way. And i live in the philippines. Thank you
@Budivedder4 жыл бұрын
Nice helmet
@jamesb.20644 жыл бұрын
I wanted a Shark on my last helmet purchase, but all the motorcycle shops in this area of Florida tell me that Shark is very hard to work with and they all stopped carrying them. I didn’t order on line because I always want to try on a helmet that I’ve never worn before. Not possible around here with Shark.
@dimosk73894 жыл бұрын
that looks like an offices and warehouse tour, not a factory tour
@inkalankala71064 жыл бұрын
Mat I will trust helmet when saw crush shark helmet because ride loose jaws .chins with helmet on .. why that happen if helmet are safe?
@mobilelegendsbangbangtv38122 жыл бұрын
How to become a dealer ?
@duncanfraser23904 жыл бұрын
This replacing the helmet helmet every time you drop it thing is bollox to make you spend more money.
@WolfgangVonKempelen838
4 жыл бұрын
No it is not
@ernestonoir5796
3 жыл бұрын
agree.. and if it were true, MX riders would need a new ones every week because they crash way more often than road riders, especially little kids who ride MX, they fall like every day.
@pinoyavenger8850
3 жыл бұрын
I once drop a cheapo one from my bike seat and it has a crack as big as a piggy bank coin hole. My point is if you can see it damaged you need to replace it.
Пікірлер: 23
I have two sharks, 1 full modular and 1 full face. Brilliant helmets. Great information Mat.
Normally we refer factory as a manufacturing facility, btw the video shown like the structure is a distribution and r&d hub instead of a real "factory".
great show guys, thanks !!!!
The need to replace the helmet after falling by itself it's just a mith... With nothing inside to make it absort any energy like it's supposed too (unless it had a watermelon stored inside), the helmet will be fine unless it's a really bad drop and cracks the outside shell which is unlikely
@WolfgangVonKempelen838
4 жыл бұрын
Good luck
I had no idea that SHARK was this committed to safety and tech with their products! I live in Maryland and would love to try on some helmets, but no product in the State of Maryland!!!
@davidsmolsky957
4 жыл бұрын
Donaldson Cole order from revzilla. Free returns
@donaldsoncole3095
4 жыл бұрын
david smolsky - Thanks for the tip !!!
I like shark helmets and have 2,just love the fit Chips and scratches to the shell do not weaken the helmet considerably That’s why Arai sell specific helmet touch up paint
@coolhandpuke3780
4 жыл бұрын
Yea I've got an old ish S900 and it's one of my better fitting helmets..
@crm2507777
4 жыл бұрын
Coolhand Puke yeah I’ve got a Shark Raw and Vancore and love them both
Is there anything i can do to avail the warranty of my shark skwal 1? I really dont have idea where to or whom to contact. It was bought in australia by the way. And i live in the philippines. Thank you
Nice helmet
I wanted a Shark on my last helmet purchase, but all the motorcycle shops in this area of Florida tell me that Shark is very hard to work with and they all stopped carrying them. I didn’t order on line because I always want to try on a helmet that I’ve never worn before. Not possible around here with Shark.
that looks like an offices and warehouse tour, not a factory tour
Mat I will trust helmet when saw crush shark helmet because ride loose jaws .chins with helmet on .. why that happen if helmet are safe?
How to become a dealer ?
This replacing the helmet helmet every time you drop it thing is bollox to make you spend more money.
@WolfgangVonKempelen838
4 жыл бұрын
No it is not
@ernestonoir5796
3 жыл бұрын
agree.. and if it were true, MX riders would need a new ones every week because they crash way more often than road riders, especially little kids who ride MX, they fall like every day.
@pinoyavenger8850
3 жыл бұрын
I once drop a cheapo one from my bike seat and it has a crack as big as a piggy bank coin hole. My point is if you can see it damaged you need to replace it.
Sooooo where's the factory tour... 🤦♂️
@agentpoome3045
2 жыл бұрын
real factory is in thailand