Helpful Mark. My Crystal is finally in the mail. Took about a month to ship after the initial shipment notification. They needed to to do mold maintenance before they could get the orders out.

Great video, Mark! I changed a few settings, looking forward to experiment some more again tomorrow, with those settings implemented. Greetings from Norway 👍👍👍

Spot on video Mark, your settings mirror mine almost exactly. Thankyou for all you do for the simming community. Take care.

@idiscovertv

10 ай бұрын

Hey Hey man !!!!

@VRFlightSimGuy

10 ай бұрын

@@idiscovertv Hey! 👋

@SimHangerFS

10 ай бұрын

No real surprise our settings are the same…I started with your recommendation and couldn’t better them 🤣

@VRFlightSimGuy

10 ай бұрын

@@SimHangerFS That did make me chuckle 😅

@tomc1380

10 ай бұрын

@@SimHangerFS kinda surprising you could even match those settings with your older 10th gen intel cpu vs Steve’s 13th gen i913900k. In any case I’m glad you’re getting good results with your Crystal mate. It’s still on my radar and I’ll definitely be considering getting one once it’s Fully Functional with all promised features, and available from Amazon. Thanks again for all your interesting and informative videos mate and best cheers from Australia.

Awesome - Just what i Need

Great video Mark, thanks, i have the same results with AMD 7950X3D and RTX 4090, this week enjoy every day flying with the Pimax Crystal in my new DOF Reality H3s with basshakers and Simhaptic

@SimHangerFS

10 ай бұрын

Assembling my H3 next week ! 😀

Hi, nice video, congratulations on the content. I recently purchased the Pimax and I'm quite happy with the difference and improvement I got from the Reverb G2, I was trying to record a video with DCS and flight simulator but I can't record full page like you do. I use obs but then how do I get a single large window and not two? Thanks for any replies and congratulations again for the videos

Hi Mark! As always amazing content! Question, did you tried the Pimax with the latest Fenix 214 version? Did it work for you? I was having some issues not being able to dial stuff in the AP or MCDU…

@SimHangerFS

10 ай бұрын

No I have used the PMDG 737, but not tried the Fenix yet. I have noticed FLOW can be a bit awkward sometimes though. There is also an intermittent issue with wireless mouse and Kb combos.

Excellent video ! I have done exactly as you and also I’ve tried DLSS-DLAA. I’m getting some shimmering effects with buildings that have lines close together such as corrugated steel hangers with TAA, but I agree that it does look better than DLAA and I’m getting a solid 45fps. DLAA doesn’t have this issue but I can’t get above 30fps. Running i9-14k, 64GB RAM, 4090 GPU. Also noted - I can’t seem to use my mouse when the single mirror window is selected - it’s not the active window. You’d have to have a separate monitor to use this.

Hi Mark What setting will help the blown out over exposed appearance in the crystal? Thx Lee

I've been itching to upgrade from my G2 to a Crystal but I've read about some production and QC issues which makes me hesitant.

Impatiently waiting on eye tracking for DFR.

Brilliant video, thank you. Have I read somewhere that if you have an AMD CPU motherboard you need to disable the onboard graphics in BIOS?

@SimHangerFS

10 ай бұрын

Yes you do.

Found it thanks ks for thus

Since I don't own a PIMAX VR device, all this information is meaningless to me right now. Should I ever get one of these headsets in the future, it is nice to know that your video exists. Take care.

Ordered July 25th. Ships today and apparently with glass lenses according to the e-mail.

can you tell a bit about Chromatic aberration people are experiencing? There are topics on reddit and discord, people see CA in the middle. Can you elaborate on that and tell us where do you exactly see CA looking at e.g. Garmin panel

@SimHangerFS

10 ай бұрын

This is a failure of a lens to focus all colors to the same point. Typically you will see a red line underneath black writing, especially noticeable on a white background. There is some Chromatic Aberration visible on the menus etc. but it is not awful, I’ve seen worse. It is more noticeable with local dimming off. I have noticed this on Mcdu/fms etc. I haven’t especially noticed anything on the Garmin units.

Hi Mark (and Steve) - great video . I have my FPS locked to 45 globally thru the Nvidia 3D settings.Does that have the same effect in your opinion as locking it thru Pimax XR app? - many thanks

@SimHangerFS

10 ай бұрын

Better to lock via Pimax app, then it will always apply and not get overridden.

@kam_a3216

10 ай бұрын

@@SimHangerFS thank you Mark.

If you fly VFR steam gauges planes on 4090 try resolution in OXRT 4700 x xxx and DLSS Quality in the sim. You might be surprised with the quality of the external view. I thought that TAA 100 and 3500 x xxx is the best for VFR - until I tried the settings above.

@donc9751

8 ай бұрын

Just wondering if by adjusting the 1st number for resolution to 4700 x xxxx changes the 2nd resolution numbers automatically? And changing those numbers in the stean vr settings is reqimuired enmven though the PimaxXR Control Center is set to PimaxXR? New to this, thanks for any info!

Hi Mark, how do we download the beta program like this? if it is only available to developers, do you know when the Beta version is going to be made available for normal issue? I also noticed that your headset has a higher version than what I have, yet when I press the 'HMD update' button it states that there are no updates available. Thanks for your excellent content, its just a bit frustrating when I'm unable to follow exactly your instructions at this time.

@grzegorztomasiak

10 ай бұрын

only 100 random people got BETA version. You need to wait for them to release. I think it will be in a couple of weeks starting from now.

@SimHangerFS

10 ай бұрын

I didn’t realise this was not out in the wild…so not sure. Hopefully soon.

great video, how did you get the full screen recording? If I use the mirror in xr it has two black bars on each side.

@SimHangerFS

3 ай бұрын

I zoom in

@Likes2fish-rk1kf

3 ай бұрын

@@SimHangerFS OK I'll try that

@Likes2fish-rk1kf

3 ай бұрын

@@SimHangerFS I tried zooming in with OBS and the quialty is bad. steam vr would be the best route for recording but using it cost me 10fps. I need to gain frames not lose them. I can't set my monitor to 4k I don't have the head room. I have the 4090 and i9-13900k. If I set my headset to 90% in msfs I can get mid 30's fps but I do lose some sharpness

Does this set up work with the crystal light?

Great content …quick question…So do we even need open composite anymore?

@SimHangerFS

10 ай бұрын

No you do not need OC..don’t use it for MSFS.

@la-codeband

10 ай бұрын

@@SimHangerFS ok cool and same for DCS?

@SimHangerFS

10 ай бұрын

@@la-codeband I don’t know the answer for DCS. I suspect it is still required.

@SimHangerFS

10 ай бұрын

@@la-codeband Not sure, but this may help pimax.com/dcs-best-vr-settings-optimization/

can you tell me why did you put Render Quality to Maximum and then downscaled it in OpenXR? What's the benefit, can we just not override and set Render Quality at Custom providing e.g. 0.80 or 0.85 value? The resolution should be similar in that case

@SimHangerFS

10 ай бұрын

Yes it would be, but the slider bar in the Pimax app does not seem to move in small enough increments to do this. It seems to move from max straight to balanced etc.

I'm just stepping up from the G2 headset to the Crystal. I have it looking great, about 45 FPS with nearly all high and ultra settings, but one issue I'm having is when the aircraft are on or very near the runway, there is a lot of shimmer or jitter on the edges of the aircraft windows or wing struts. I had this ironed out with the Reverb G2, and it was like butter, but I cannot remember what setting I used to fix that issue... Any thoughts? I'm Running a RTX4090 and a 13900KF (Also I keep getting black screen crashes causing me to have to restart the PC. I can play for about 30 minutes at a time)

@SimHangerFS

10 ай бұрын

Check, you may have fixed foviated rendering on in OpenXR toolkit.

@sep2345

9 ай бұрын

Regarding the black screen crashes… I’d be willing to bet you have HAGS on. Turn it off and let us know if the crashes go away!

I just got my Pimax Crystal and 1 thing that is confusing me some is, if its best to set the PimaxXR OpenXR Control Center to PimaxXR do we still adjust those resolution settings by going into the SteamVR settings?

@SimHangerFS

8 ай бұрын

No you don’t. Use OpenXR Toolkit.

Hi, tyanks again for your great videos. I am just wondering with my pimax crystal/4090/7900x cpu my vram is only 40% used at max doing the same settings you use here. I tried even some higher settings, it remained there. You know how to make it use more vram and make it smoother. It runs ok by the way but i thought it should use more of it. The gpu headroom is anywhere between 20% and 0 at 45fps locked. Thank you

@SimHangerFS

5 ай бұрын

Single core limitations.

@Di011

5 ай бұрын

@SimHangerFS thanks but i wonder why that would cause lower vram. The gpu does hit 100%

@Di011

5 ай бұрын

@SimHangerFS by the waybi changed my ram, it was CAS 40 corsair, and I went to CAS 30, and my fps jumped up 30%, i get 60fps now, but interestingly the vram is still the same only using 40%. So I ordered 7800x3d and gonna see what that will do hopefully i can get more of the vram

@Di011

5 ай бұрын

Hi My man, I installed 7800x3D last night, I got the same exact framerate. Also with your setting I get around 40% VRAM same as before, no more than 10GB. But when I go to native Resolution I get about 12GB of VRAM used and when I choose super Resolution like 120% it goes up higher to 14GB. This is flying in Manhattan New York. My fps is good, but I still wonder why my VRAM is not being used. My case is super cooled, my GPU and CPU temperatures stay around 60s. I even have switched most of the settings to Ultra with world LOD 200%. I get a solid fps. Anyways thank you, now I have to decide which CPU to keep 7900x or 7800x3d

Thanks for the video Mark. Do you recommend the Crystal or Aero for a PC with a i7-10700 CPU @ 2.90GHz, 32.0 GB, & 4080 for MSFS? Which headset (between Crystal and Aero) requires more CPU or GPU resources in MSFS since I only have a 4080? BTW: For my current Win 10 system, DX 12, & DLSS Quality or Balanced works best.

@SimHangerFS

10 ай бұрын

The Aero has a considerably lower pre-rendered image, thus less demanding, but marginally lower image quality.

Do you have set up for the new Pimax Crystal Light?

@SimHangerFS

6 сағат бұрын

Coming soon.

i recomend the tobii 5

Do you know where to get the thicker face cushion?

@SimHangerFS

9 ай бұрын

No, using the one that came with the headset. Not sure if third party products have hit the market yet.

Is anyone else's local dimming appears not to be working? Flying in a black night it appears like I'm looking through fog covered goggles with all the blooming.

@SimHangerFS

9 ай бұрын

Known issue, turn LD down and it goes away.

Awesome Mark! Do you have X-Plane 12 by any chance? I have a Pimax Crystal, 7800x3D, RTX4090, 32GB DDR5 6000Mhz RAM and 2TB NVMe drive. Identical to your system! If you could do a similar tune up video as this one for X-Plane 12, I would be so in debt with you! 🙏🏼

Hey Mark so I have followed this video to a T within the Pi Play, PimaxXR and msfs settings and wow I am getting such bad performance and Im not sure why. I also have a 4090 GPU accept I am running a I9 9900k witch I cant afford to upgrade yet, Maybe within a year or two. Other then the much lower CPU can this be the cause of my stuttering and really bad gosting? Could it be my nvidia control panel settings? I even went into my nvidia controll panel and reset everything both in Genral and MSFS and it didn't help at all. Please help. Nevermind, Im knocking on my head and working it out.

@grzegorztomasiak

10 ай бұрын

it may be, because 4090 only is flying with high end CPU like Ryzen 7800X3D. You have to tell us what is your render resolution and how many fps you get

@GT1GT

10 ай бұрын

@@grzegorztomasiak render resolution is at 3500 X 4142 in TAA mode and 42 fps locked but nevermind I am working it out.

@SimHangerFS

10 ай бұрын

Check smart soothing is off and turbo mode is on. This helped me push up the fps.

Hi all , I m a Pimax Crystal owner and i tried to apply the same settings shown here on my system( 5800X3D , RTX 4090 , 32 GB ram): - in MSFS: AA TAA and Medium to High settings , TLOD 150, LOD 130. - in OpenXR: resolution set to 3500*4142 ,turbo mode on, refresh rate locked to half(45) and i also activated DFR. The issue is ,even if frame rate seems stable, i m experiencing terrible re-projection when moving my head around. the issue goes away if i change from TAA to DLSS quality or if i keep decreasing the resolution with TAA. I found a good balance using DLSS Quality and increasing the resolution higher than 3500*4142 but i m curious why following these settings i m not able to have decent performances? Is there some other of you with similar configuration struggling to achieve good performance following these settings?

@fizzman911

6 ай бұрын

Did you ever figure it out? Same issue.

@nicknerd7099

6 ай бұрын

@@fizzman911 yes in my case there was HAGS activated on Windows..disabling it solved my issues

HAGS on or off??

@SimHangerFS

10 ай бұрын

As mentioned in my previous video…HAGS ON