Settings for your best FT-991A CW Receive

Ғылым және технология

There are a few adjustments you can make to the Menu settings and Functions, along with “hard” adjustments to the knobs on the front of the FT-991A that will improve your CW Signal Receives.
This video doesn’t only show you what I use or what Yaesu recommends, though those are discussed. I tell why I have my rig set this way, and adjustments you can make to better suite your preferences, style, and conditions.
Summary of Settings in this video (* = Your mileage may vary) - In order shown in video…
Menu Settings
050 - CW LCUT FREQ - 700*
051 - CW LCUT SLOPE - 18db/Oct
052 - CW HCUT FREQ - 800*
053 - CW HCUT FREQ - 18dB/Oct
114 - IF NOTCH WIDTH - Narrow
115 - SCP DISPLAY MODE - WATER FALL*
116 - SCP SPAN FREQ - 50 kHz*
001 - AGC FAST DELAY - 300msec
002 - AGC MID DELAY - 700msec
003 - AGC SLOW DELAY - 3000msec
Function Settings
AGC - AUTO
IPO - Set as required for your conditions
NB - OFF
NAR/WIDE - N 150
ATT - OFF if not needed
NOTCH - Generally OFF - but use if needed
DNR - OFF or run through algorithms to find the best one for your conditions
DNF - OFF
SHIFT/WIDTH - adjust for operating comfort
Chapters:
00:00 Introduction
02:38 Menu Settings
05:56 Function Settings
16:55 Knob Adjustments
19:48 CW-LSB vs. CW-USB
21:03 Summary and Announcement
22:59 End-Notes
Please remember to Like, Share, Comment, and Subscribe
73 de Tom, ND3N

Пікірлер: 29

  • @davidschiff5615
    @davidschiff56152 ай бұрын

    Great job. Each item clearly explained and right on target in useful language. W4CLR

  • @ND3N

    @ND3N

    2 ай бұрын

    Glad it was helpful!

  • @andrewsturch
    @andrewsturch Жыл бұрын

    Another great vid, thanks for your time putting these together!

  • @stevenbata2336
    @stevenbata23365 ай бұрын

    I am glad you posted this. I recently got into CW and was told about adjusting my band width to pull in those weak CW signals. 73s de KD8VSP

  • @ND3N

    @ND3N

    5 ай бұрын

    Glad it helped

  • @jocelynve3jct436
    @jocelynve3jct4362 жыл бұрын

    Wow, that's my first time on the Channel and I'm much impressed! Thank you so much for this information on the FT-991A; it is very useful for my CW entry level as well as operating my new rig. 73, de VE3JCT

  • @ND3N

    @ND3N

    2 жыл бұрын

    Thank you Jocelyn. I have a lot of other FT-991A videos that you may be interested in. Take a look at my channel listing - I've also noticed that if you do a search for FT-991A, there are a number of my videos about this rig listed there. I'm only been doing YT for about 10 months, so I'm always surprised when I show up with the big guns... 73 de Tom, ND3N

  • @DD-gd3fr
    @DD-gd3fr Жыл бұрын

    Tom your awesome ! what a great vid .thank you so much for teaching us. first I felt intimidated with my 991a . watching your vids and spending more time with the radio its all coming together ....great teacher. KI5CDQ👌

  • @ND3N

    @ND3N

    Жыл бұрын

    Glad to help

  • @curtmyersk2cwm477
    @curtmyersk2cwm4772 жыл бұрын

    Nice, thank you..

  • @ND3N

    @ND3N

    2 жыл бұрын

    Welcome 😊

  • @jorgerueda7087
    @jorgerueda7087 Жыл бұрын

    thank you

  • @ND3N

    @ND3N

    Жыл бұрын

    You're welcome

  • @benjaminabood7945
    @benjaminabood7945 Жыл бұрын

    Hi Tom love your videos but I might have missed it but did you cover the APF filter? It is amazing in pulling weak signals. Play with it sometime and be amazed lol.

  • @ND3N

    @ND3N

    Жыл бұрын

    Thanks for the tip. After about a year, I'm still learning about the 991A. I see another 991A video coming. 73 de Tom, ND3N

  • @traderlarry
    @traderlarry2 жыл бұрын

    Great job, Tom. I do a lot of POTA and I'm always looking for best reception settings for handling pileups when hunters are all transmitting at once. The attenuator would eliminate the weakest signals for sure (although I do want to hear QRP hunters) but any other suggestions?

  • @ND3N

    @ND3N

    2 жыл бұрын

    Find a way to spread out your callers. Call call by call area on the callers ticket. Call for stations beginning with “A” then “K”. When you complete US, call for DX. If need to, operate split. Just a few ideas.

  • @traderlarry

    @traderlarry

    2 жыл бұрын

    @@ND3N yes. I do ask people to spread out but not everyone is polite. I generally lower my power which helps.

  • @mochyaman
    @mochyaman15 күн бұрын

    Apakah bisa bermain di 27mhz(11m)? Mohon pencerahan nya

  • @ND3N

    @ND3N

    14 күн бұрын

    Yes it can, but it is not type certified by the FCC, and by most other countries that are signatories to the ITU regs, and they can confiscate it if you are caught using it on CB …. I wouldn’t recommend it…

  • @mochyaman

    @mochyaman

    14 күн бұрын

    @@ND3N ok thanks (JZ10CDF) from indonesia

  • @jorgerueda7087
    @jorgerueda7087 Жыл бұрын

    Hi, Tom, I loved your videos of the 991A. I heard you say that you had problems with the computer, that is happening to me when I stop using the MRP40 in CW and I go to LSB or USB when I press the microphone to speak, the computer turns off, that happened to you

  • @ND3N

    @ND3N

    Жыл бұрын

    The problem ended up being with my computer. Called HP friends tech support and they identified a problem with my Windows 11 upgrade - it had corrupted some of my drivers. A quick fix and everything was fine. Haven't had a problem since. 73 de Tom, ND3N

  • 2 жыл бұрын

    Merci bien. F1SKF

  • @ND3N

    @ND3N

    2 жыл бұрын

    You're welcome - 73 de Tom, ND3N

  • @terrysurface8663
    @terrysurface86632 жыл бұрын

    thanks and looking forward to the ssb video, 73 de N4IQV

  • @ND3N

    @ND3N

    2 жыл бұрын

    You're welcome. Now that I have the first one out of the way, I expect that the others will come easier. 73 de Tom, ND3N

  • @edwardmanfredi121
    @edwardmanfredi1212 жыл бұрын

    Great Job Tom, for us Newbies ! Ed W4EML

  • @ND3N

    @ND3N

    2 жыл бұрын

    Thanks for watching!

Келесі