Would have been a useful tutorial if it showed how to actually use it with an off camera flash

@primetimegrant

2 жыл бұрын

Dawg that’s why I hate that KZread removed dislikes cause this wasn’t helpful at all

@timd4524

Жыл бұрын

Did you read the title.

@marekward6202

Жыл бұрын

The set up menu he was referring to didn't even come up for me. Let alone syncing with my V1 flash, channel selection etc etc😄

Very interesting and useful tutorials. I just received 3 TT600 and this trigger. Your videos have me up and running in only a few minutes. Thanks.

Just picked up the X Pro C and an AD200 Pro. This was very helpful. Thanks!

Simple, clear and straightforward!

Simple and clear , thanks buddy

MAHALO, Alex!!! Great video and information! Keepʻum coming!

Thanks for posting. Waiting for my V1's and transmitter to come in.

Nicely explained! Thank you!

@alexsilva_co

3 жыл бұрын

Glad you enjoyed it!

Thanks for the video sir, good stuff 🙏

Thanks for the info on batteries, was wondering why my level wasn't showing as full

So many unanswered questions: Why a preference for CH9 & 16? How to sync w/GODOX flash?

Very helpful. Thank you.

Excellent video. Made setting up this transmitter so easy. Tried to follow the instructions that came with the unit, but was too hard to read and follow. Thanks

@alexsilva_co

Жыл бұрын

Great to hear!

Well explained sir. Thank you so much......

great video - thanks!

@alexsilva_co

3 жыл бұрын

You are welcome!

Please do more videos using Xpro and Godox V1. Thank you!

@alexsilva_co

3 жыл бұрын

Thanks! As soon as I get my hands on a V1 ;-)

Wow, stil have no idea how to trigger my Godox flash with this unit.

Great video. I tried to sync the R2 transmitter to my eVOLV 200 R2 flash, both on Group A, CH1 TTL. It didn't fire. Any suggestions? Thank you.

Excellent guruji

Thanks man, you saved me today lol..

Hi there, I recently purchased the flashpoint r2 pro and a R2 receiver. Upon testing the units I noticed that on highspeed sync my photos are coming out under exposed, even though I'm using the correct exposure. However when I shoot the same shot with the flash attached to the camera on highspeed sync the results are quite accurate. Do you have any suggestions? Thank you for your time and great job with the vid.

Can we change the power up and down in full stops (the xpro1 only provides 0.1 or 1/3 increments, as far as I could figure out) that would be very helpful

you did a great job explaining!

@alexsilva_co

3 жыл бұрын

Thank you!

Hello, excellent review Please answer. I have Panasonic camera GX8. Can I control Canon TTL flashes only with X PRO-o Olympus controler ? If I can, would I have full TTL functionality or just manual? I have two great Shanny flashes for Canon I would like to not change them for specific Panasonic flashes. Thank you

I would like to know if this is also compatible with Nikon z6?

hola tengo transmisor y flash neewer en mi canon 80d pero solo funcionan por el lente visor y no por la pantalla táctil, sabrías que podría hacer. gracias

My trigger works fine with my AD100 PRO, but inconsistent with my V1N. Can't figure out why.

Can I ask with a-e. If for example your one channel say ch2. With the a-e and they are different powers if you would like one choose 4th power in group A then group be would B would 2nd power and c would be full power as set in advance. If they are all on channel 2. Would it just be a matter of selecting a b or c if already prepared in advanced?

I bought this trigger Godox XPro-C for my Canon 5D Mark III, my speedlite Canon 430EX II but I can't get it work wirelessly. Is there anything I am doing wrong? Please kindly help.

Can someone please show how to connect the Ad200 to the godox xpro? On the same group, same channel and no communication. Any help would be greatly appreciated.

Great video! Can you share why you would use TTL versus Manual? Also, how do I change exposure compensation in TTL so that it also shows on my Godox flash?

@alexsilva_co

3 жыл бұрын

Hi! The TTL vs Manual comparison is on my list of future videos. May I suggest this other video in the mean time? It shows TCM, in which you can start shooting in TTL and then convert to Manual: kzread.info/dash/bejne/l5yHmM6OdZC_maw.html

@jakepaddyfield4767

3 жыл бұрын

TTL- the exposure will be automatically calculated and set by the camera, though you can override a little, Manual, you have to do it the calculation and adjustment yourself...

how do i get the transmitter to connect to my flash? i can't seem to connect them

The LCD display is only showing Single Group, how I can change it to see a Multiple Group display? Thanks!

can you use this other brand transmitters on different camera bodies?

you did good but I can't figure how to change from TTL to Manual?

I have the R2pro, I can't Get the group D and E to TTL mode, only A,B,C , why is that ??

Hey Alex do you know if the Godox Xpro-N trigger can work with a Flashpoint R2 lll flash?

I just bought this and noticed the when i turn it on all i see is the blue screen. After about 5 minutes or so i see the display..Is this normal?

Can I only use 1 channel at a time? For example, can I have one speed lite on Group A Ch 7, and a speed lite on Group B Ch 3? Is this possible with this transmitter?

Why my godox xproc cant fire or control 2 flashes. Only single flash at a time im using V1 and TT600.

Question...I have a 430ex rtiii. How do I use it with the godoxpro-o installed on a lumix s1?

@alexsilva_co

3 жыл бұрын

Hi! The 430EX will not understand the radio signals coming from the XPro-o. However, you could place the 430EX on a X1R-c receiver. You can see a similar setup in this video: kzread.info/dash/bejne/Y2h3ydOToKmwiqg.html

I'd rather change the settings for the flash in camera than in the transmitter. The settings in camera also overrun the transmitter

My Godox X-Pro does not allow me to use the 2nd curtain sync on Canon 700D (Rebel T5i). I am not able to enter the camera menu “biult-in flash settings” when the trigger is attached. Does anybody know how to solve that?

This would help a lot, can this Xpro Transmitter Be synced to Neewer Vision 4?

@alexsilva_co

3 жыл бұрын

I don't have access to a Vision 4 but, based on a quick google search, I don't think it will work.

It didn't help me. You didn't tell and explain how to connect the flashes to the trigger?

Help! My screen doesn’t show M for manual by group A. It only shows ON. I am so confused.

how can i set in high speed?

Why you like chanel 9 than 1? Curius 😁

I have a canon 470EX-A1 speed light and I cannot for the life of me find out how to connect this and fire the flash wirelessly

Will it work well with Hasselblad X1D?

@jakobjohannsson1045

2 жыл бұрын

It works with 907x (The Nikon version)

Will the xpro-o work with x1r-c/n/s?

@alexsilva_co

3 жыл бұрын

Yes, I actually tested the X1R-n with this transmitter :-)

Has anyone tried using this with the canon EL-1?

@alexsilva_co

Жыл бұрын

Even though the EL-1 has radio capabilities, it's not compatible with the Godox radio system. In order to control and fire the EL-1 remotely, you need Canon's ST-E3-RT transmitter, or something compatible like the Phottix Laso transmitter

Do Godox - have TCM ⁉️... if so - Video Please ❗😃

@alexsilva_co

3 жыл бұрын

Hi there! I think this is what you asked for :-) kzread.info/dash/bejne/l5yHmM6OdZC_maw.html

@mariobravo8253

3 жыл бұрын

@@alexsilva_co Thank You 😃❗👍 it's EXACTLY what I was hoping for...and even a little more

I thought this was about setting up the unit??

I have s godox x2t, instead. Having a problem getting it to fire my tt600. Settings match on both units - both on A, manual mode, channel 3, 1/128 shutter speed. I'm using a Nikon D850. Maybe my camera settings are incorrect? Would you help me, please?

@darryl_andrew

3 жыл бұрын

probably you figured it its been 4 months but i just changed my channel from 3 to 1 and my godoxad600 fired. My xt1 was only firing intermittently so i got this pro version for my Sonya7rmrk4 and left the XT1 for my other sonys which work fine

@denniscrabtree2170

3 жыл бұрын

@@darryl_andrew thanks for responding. I have had 4 different units. Only 1 worked right out of the box, for about 2 months. I start at channel 32, then proceed down towards 1, looking for a channel that works. No luck so far. I contacted Godox, and their solution is to have me share a video of the unit not working. I purchased a cable until I get it to work the way it's supposed to, if that ever happens.

@alexsilva_co

3 жыл бұрын

Hi Dennis! It's been a long time but, did you manage to get your gear working?

@denniscrabtree2170

3 жыл бұрын

@@alexsilva_co i chose to buy a cable that links my camera to the godox x2tn. Tired of returning units and the new units not working either. Thanks for asking.

That really sucks that they need alkaline batteries. Should have given it a LI-Ion battery if you can't use rechargeable. I've bought some expensive LADDA rechargeable batteries which I'm hoping will be fine.

Has not covered all the buttons

Dude, you didn’t explain anything about how to connect the various flash units to the transmitter, you never explained what groups and channels are for and how they relate to connecting and controlling various flash units at different power settings…

Not really a set up tutorial. A set up tutorial would show how to set up this unit working with a godox flash light. Pairing them and running them together. Now that would have been a setup video. This just shows the interface in the trigger.

Got bored so gave up

Not helpful

What's wrong with your voice man?

Tutorial rating: Terrible. No setup instructions or walkthroughs