Hey Ryan. I’m a 42 year old RC guy who recently got a few track cars. Haven’t done any racing since I was in my 20’s. Your channel has been super helpful getting back “up to speed”!! Thanks bro!!

@RyanHarrisRC

5 жыл бұрын

Awesome! Hope you enjoy those cars

@agoodballet

5 жыл бұрын

Same here. It’s crazy how much has changed.

@gannongrant7121

2 жыл бұрын

instaBlaster.

I had the similar same issue with steering on a 1/8 buggy a few months ago and found out after a longer investigation that at my model there was a wrong suggested length in the manual of the steering connection between servo horn and Ackerman plate. Since then I always center the Ackerman plate first with a caliper then center the servo horn in neutral to a 90 degree angle and then connect the rod resp. Modify the length of the rod and connect it then. BTW: Don’t forget if you change the front camber it will also change your front toe out and vice versa. For this reason I change only the settings of my front in a setup station.

Saving this video to watch repeatedly!!! A ton of simple, easy to understand information. You are extremely good at explaining yourself in an informative and knowledgeable way. But still not losing everyone in technical terms. Awesome videos dude!!

@RyanHarrisRC

5 жыл бұрын

great to here dude! Best of luck dialing your car in!

Just got a B6. Really sweet little car. Good info here.

Dang your videos are good. The effort you put into their look and content is very evident. Thank you!

More helpful info and all around great job with your videos. Great production, info, everything. Keep it up!! Easily one of the best produced RC KZread channels I've come across.

thanks Ryan for your insights, Ive been racing for 30 years and im still learning.

the most informative video ive watched about 2wd buggy tuning. thanks for making it simple.

This was a great video and a lot of info for a guy returning since leaving 25 years ago. Great content!

Thank you for the tips! I especially love the diff explanation. This helped me understand the diff setups more!

Ryan, your one of my favorite RC dudes to watch!!!

Thanks Ryan, as always you've provided some great detail on car setup that will help me in a big way!

Hey ryan started racing about 8 months ago and your videos are very helpful thank you

Love the channel, watch every video! My race program is so much improved because of these videos. Thanks Sir

Awesome video Ryan !! Good luck buddy!

Drive Your Race!! Im going to remember that as I practice!! Sorry for the loss of your father.. He must of been a great dad though!! I didn't grow up with a father but im raising my children the best i can with rc cars of course :) Still watching your channel learning.. setting up some cars of my own :) Best of luck to you brother!

Love you videos. Great info. I'm picking up a B6.1D in the next couple weeks. Can't wait.

Thank you so much for the tips and tricks best KZread by far when it comes to racing and setup and how to videos

You are awesome R.S.H. your videos help me so much. Keep it up buddy. Good luck next week Ryan

Always awesome videos brother. You definitely have been one of the biggest inspirations for my channel

Thanks for this video Ryan! Super helpful was having the Exact same steering problem my self. Good vid!

Nice video again! I usually drive and watch rc drifting stuff , but i looooove your channel. It nice to feel your passion for this hobby and for video making. You really inspiring me for my channel, thank you so much and keep uploading 👍

The Nova slipper is really good!

That’s so funny!! I had a steering issue as well. Swapped a servo from my B6 to my B6.1 never looked at the manual and left the 1mm spacer in and had the same steering issue. Didn’t find it till I was checking out my buddy’s buggy and noticed his steering link was straight and mine was at an angle.

Hi Ryan firstly love your videos how you explain things and break things down is great I'm from the UK and run mainly on eos carpet have you have any set up tips or tricks for me thanks again

Hey Ryan, Thanks for showing your adventures! I dug out all my old RC stuff (Rc10T3) from 20 years+ ago. I want to get back into racings and looking at new kits but not sure what I should be looking at. I want to make it into a 1/10th buggy possibly 4 wheel drive. What do you recommend nearly starting from scratch again.

Switched to the schelle towers a few months ago. Will never go back to stock towers lol. Going to Mills tomorrow to do some regionals prep and Play with springs, suspension set ups and tires. Its funny how your video topics are always timed to come out right when im in the process of doing the same thing or preparing to the same thing with my cars. It works out well!!! Good luck at INS!

@RyanHarrisRC

5 жыл бұрын

Great minds wrench alike? haha

With it being winter here in illinois , I got a bunch of parts in for next seasons build. I just cant get motivated to build it up.

Hi Ryan! I really enjoy your videos very much and I hope, you keep up doing this! I am a hobby racer (1/8th nitro and ebuggy and 1/10 2WD stock 13.5) and an ambitioned hobby fotographer from Hamburg/Germany. So I really see the quality and effort you put in the technical aspect of your videos! Great! And I like the content as well of course! Thanks a lot! I struggle a little at the moment with motortemperature and timing and gearing my 13.5t-motor correctly. Maybe you can have this as a topic for one of you next videos. Best regards from Hamburg!

Just a helpful tip. When measuring inside length or diameter you should use the other side of the caliper to get a more accurate measurement. Thank you for the great content as usual and good luck with the new setup.

Dope hat! Literally 😂

Ryan thank so much great information I been racing two years and never understood the pill positioning thanks for explaining it cool video

@RyanHarrisRC

5 жыл бұрын

Happy to help dude!

@derickcriswell1477

5 жыл бұрын

Good luck at ins and have fun

What I'm talkn about. Respect!! Nice to see people workn on their 1:10 scale 2wd buggys. Starting my own tlr-22 3.0 spec racer build. Nothn to powerful savox 1256-tg..Orion vortex ultimate stock..skyrc ts120 aluminum edition in blue with bluetooth link..spektrum radio..nano tech ultimate shorty 2s 90c..and the mip axle pucks setup along with tlr narrow gear set and a cool R17 chassis protector in blue with pearl lime paintjob. Florescent yellow velocity wheels with few diff. sets of prolines. Honestly skyrc esc's have proved to be pretty damn good especially for the nickel. But well see. Nice associated by the way!!

Ryan Harris, Thanks for all your great videos!👍👍👍 I just came home with a newly purchased Asso T6.1. and this video came right before the assembly. Maybe you have at the next opportunity some tips about the RC10T ....? 😄

@RyanHarrisRC

5 жыл бұрын

I will do T6.1 video in the future for sure!

Hey Ryan , My Name is Ron Ehrlich I just wanted to reach out and send you a special thanx for what you do with your channel.. I currently live in IL and my hometown track is Leisure Hours Raceway. I have been subed and following your videos like there an encyclopedia to Rc Raceing ... I purchased a TLR 22 4.0 Buggy around the Holidays this Year.. and Followed all your Advice Bro! I Did just Enter my first Rookie Race at Leisure hours and I was Dialed... I TQ 'D for 2wd 17.5 buggy And Took the 1st place Win.... In The A main... I have pics to show but cant send them I Friend Requested you on Facebook... and Hopefully i can Share a run Video I have my wife took of the Heat... and would like to share some Pics of my buggy and 1st place win... !!! AGAIN THANK BRO FOR WHAT YOU DO !!! Im so happy my car handled so well and that I was able to stay calm and fast... Keep makeing videos Brother and All the Best to you and your Family!

Hey Ryan. Love your videos! They are always informative and entertaining. Question for you. I run a LCG 4x4 Slash and am wondering about weight distribution. What is recommended for dirt? I used to run kart and kept things 40/60 but I rarely jumped it in dirt (only once).

Hey Ryan, I’m in my late 40s and getting back into RC racing after about 15 years! Can’t wait, but lots has changed... tying to catch up. Any recommendations for a budget battery charger? I know you do did a video on a budget setup, but can’t seem to find it. Thank you for the content and inspiration....

What a great video (again)! Altough I do not understand everything well, because of my poor english and the technical stuff i have never seen before, I watched your hole KZread-content. I especially like the sights you are showing of your ways, if you are going to races. Your channel made me trying to get into running rc cars. I found a local track for the winter season and since october i am running a b6.1 on carpet... :) greetings from Salzburg, Austria

@RyanHarrisRC

5 жыл бұрын

Best of luck with your B6.1!

Hi, I'm from Puerto Rico and my friends want to know your opinion about which is the best servo, esc, engine and which battery would be designed or recommended by you ... if you could make a video about it, it would be very helpful for us

Great video 👍 I may have to watch this one a few times 😎

I found the same problem with my steering link this past week. Nice video and good luck at Beach. Go represent Florida dude!

@RyanHarrisRC

5 жыл бұрын

Will do homie!

Hi Ryan, I have been searching for a good explanation of turn apex and how to enter and exit the turn to maintain the most speed, etc... Was wondering if you have any advice on this.

One question have you ever read into suspension dynamics. Like what race teams use. Because all the same principles apply. F1 and Baja truck would be good material.

Hi Ryan have you ever raced on lose dirt tracks ? I'm trying to get more steering and i've changed the servo position back more as I had the same problem as you did. Front shocks are on and the outside holes top and bottom rears are in the middle . This track is an old school type track made from clay not rolled and bumpy through corners I'd like to get the car more settled mid corner as I cant use full power .

Hey. Loving the channel. How do you keep the front end on a 2wd buggy down.

Do aluminum bellcranks make a noticable impact on the steering feel?

Awesome! I am doing a rebuild on my B6 right now, and I should check whether my servo is right or not. Currently, I am looking for more steering, but I have been playing with setup stuff and I want to see if the position of the servo is wrong before I do that.

@RyanHarrisRC

5 жыл бұрын

Best of luck with the setup dude!

@robertmoore119

5 жыл бұрын

For steering if your unsure of your steering. Ensure your servo horn is installed at ninety degrees with the radio and vehicle powered on before setting turnbuckle length. Then make sure to set epa so you don't overdrive your servo, or make sure your getting full travel for left and right. If your car pushes on the track. There are many ways to get what you want from your car. Different methods suit different drivers. Make sure to make one change at a time, ensure the change actually makes you faster. If not, revert to the previous setting before trying another change.

When would you recommend using the Schelle lockout kit over their slipper kit? I picked up the lockout by mistake thinking it was the slipper kit, but am considering keeping it. Any pros or cons on the two since you’ve had this one on your car for a bit?

I had wanted to go to the JC INS race at Beach RC, but my $ has to go elsewhere. I also haven’t bought my first 1:1 truck yet, so I couldn’t have gone anyway. If you want to come to World Of RC Parts/Thunder Alley annual Xmas giveaway race on Dec.15, come on down for sure! You won’t regret it. I’ve also got a question regarding the used AE B5m CE I bought to race 17.5 off road on gray carpet. I haven’t rebuilt it yet because I need to get down to the closest off road carpet track to ask racers for setups. In testing the buggy out the way I got it used in the box,(minus some esc programming, re-soldering of all the crappy joints, and dropping in a used reedy sonic m3 17.5), it will drive straight in first gear, but when it goes up to 2nd gear it try to spin out and turn to one side. Does that mean that the diff is too loose? Good luck at Beach RC and say hi(and thanks) to Lucas Loring for me! (Just say it’s from the kid who asks way too many questions and bought his TLR 10-SCTE 3.0 and some MIP drivers there this summer and asked him more questions... my colors were orange up front and blue in the rear for the first body I painted for it and also that he hasn’t replied to the last email I sent him months ago after one of the two hurricanes lol. He should know who I am. If he doesn’t, he can scroll through his email inbox to remember.) He’s an awesome employee there. -Ev

@MX-CO

2 ай бұрын

They don't shift gears ?

Dude great video 👍👍👍👍👍👍👍👍💯💯💯 I'm watch it again lol some great info Ryan

All The Best for INS Ryan!

Good luck at INS. Another awesome video.

@RyanHarrisRC

5 жыл бұрын

Thanks dude!

When is the next video coming out? How about footage from Beach RC? Thanks for all the work you do for people like me re-entering the hobby. 👍👍👍

nice info. some ppl wouldn't share like you do. sure we could learn it eventually but you really make it easier.

@RyanHarrisRC

5 жыл бұрын

When we share, we all learn and go faster 👍

I was just on Facebook, looking at a buddies post about his INS8 experiance... And there you are in a pic, holding 2nd place hardware! Did you make a video while you were there?

Ryan do you have a link or some info on what you use to hang your cars at your work station?

Great video... great tips and diggin the beard.

@RyanHarrisRC

5 жыл бұрын

#beardgang #makesmesfaster

@evhexrc1765

5 жыл бұрын

Lololol I’m thinking about growin out too. It’ll actually look just like yours Ryan! (Gotta keep warm in the colder months...)

Good luck Ryan

Ryan, do you think that sometimes it can be easy to over think a set up?

great job with the pro tips good luck at INS

Finally another video awesome

Where did u get the supreme heat shrink that you used to hold your battery esc wires together?

Hey Ryan. Do you ever practice at the track on a sunday ?

are there any rtr buggys out there that would ever compete at a real race track? arrma 3s typhoon? traxxas bandit? or are these rtr just for fun and bashing?

Cool shirt.😁 I'll try the stuff you explained.

Hey Ryan I’m heading to port saint luci do you know of any good tracks near by

another great video. how is the wear on those octagons?

@RyanHarrisRC

5 жыл бұрын

Not bad at all!

Hi Ryan, how can you tell the the tightness of the ball diff? Do you use a torque tool or do you eyeball it? Thanks

Great video

Great video would like to see more like this 👍🏻

@RyanHarrisRC

5 жыл бұрын

Great to know 👍

I am just getting into buggy racing trying to build b6d, can u tell me why to use a 4gear or 3gear trans? what advantage does one have over the other? thanks

Love ur videos man. your content is great and i've learned a lot. Could you do the same for your B64D?

hey ryan im racing 21.5 buggy and was wondering if the revtech xfactor 21.5 certified plus 2-cell will be good in a buggy or if its for on road

Hey Ryan. I want to get into 1/10 buggy racing. I have a 1/8 RC8.2e and a Traxxas slash and I drive at OCRC a lot. My birthday is coming up and I would like to build a b6.1 factory lite but have no idea where to start. If you could help me out and show me where to start that would be awesome. Thanks

What about weights on the chassis for carpet ??

hey ryan where did you get your work mat from? thanks

Hi Ryan, what servo arm are you using? Is it an original aluminum AE 15.5mmm arm? Is that the grip type two screw or the regular single bolt servo arm? I am trying to decide whether to get the AE servo 15.5mm or the Exotek which is 15mm, what do you think?

hey man your videos are so cool

Possible to post up your set up sheets?

Hello. I am running a b6.1 on a carpet track with really tight corners. I’m not getting enough steering, and I’m wondering about your comments with your situation where you found your servo links and spacing to be wrong. What exactly did you mean by servo spacing? What am I looking for there? Thanks a ton..

is "I want to do more Rc" a good enough reason for a visa application to the US?

@timesweeper9778

3 жыл бұрын

I think it should be

@bingcringing

3 жыл бұрын

Lol

Have you ever corner balanced your chassis with four small scales to put some data around spring weight & preload settings?

@RyanHarrisRC

5 жыл бұрын

I have not, but definitely want to try!

@FrodoFett

5 жыл бұрын

@@RyanHarrisRC In theory, spring weight should be based on the overall weight of the vehicle. Corner balance should determine those spring rates as well as preload and overall shock length front->rear & left->right. Bound & Rebound would be controlled by the fluid CST. I think (maybe) valving would then control high- & low-speed bound & rebound to compensate for bumps vs jumps. There is plenty of math involved, but all the equations are out there based on 1/1th scale racecar engineering. Disclaimer: I am new to RC and learning a lot (thanks in no small part to you!), so this is all hypothetical from previous experience.

Where did you get the under lipo brass weights from? @Ryan Harris

What is ball stud spacing like what do you measure to get 3mill?

I'm not new to rc but am about to do some track days on AstroTurf so as a newb to precision driving how would I know if my setup is off besides basic setup from instructions what would I be looking or feeling for when I drive 😃😃😃😃😃

@RyanHarrisRC

5 жыл бұрын

If you're traction rolling everywhere, dial that grip down haha

Wow☺..how the pills actually work and how to test it simply.. Very cool info thanks so much! Best R/c videos on youtube!

I live in New England so what shock oil should I be using for 30 degree weather?????????

Hey Ryan... Do you use any RPM products?

I want to get into the hobby but don’t know where to even practice. There is no track near me now that Speed RC has closed. Might just get a tuggy and do off road stuff at the park.

@RyanHarrisRC

5 жыл бұрын

Sorry to hear that man, Beachrc is a days drive away? Lol

Where you get car stand block

What was the name of the stuff that you polished your hinge pins and shock shafts with?

@RyanHarrisRC

5 жыл бұрын

Brasso!

Sad that I'm not running nitro for a while but happy to run some carpet 1/10 scal

Is chassis slap on big jumps ok?

Hey Boss. What is the spur and pinion gear are you running?

Great video Ryan ! I use a savox sc-1258tg servo .I ended up not using any spacers on mine which made my steering link straight. Did you switch to the thinner spcer or no spacer at all ?

@RyanHarrisRC

5 жыл бұрын

No spacer at all!

@cliffordjohnson988

5 жыл бұрын

@@RyanHarrisRC I had to also use shorter screws to mount the the servo to the brackets.

@steeltx

5 жыл бұрын

So your issue, was the servo to close to the steering rack? So, looking down on the car, the link was not in line with the rack...?

@cliffordjohnson988

5 жыл бұрын

@@steeltx yes that is correct. That is the issue I was having with my buggy.

Hey Ryan, wondering where you get your decals for your body. I assume they are custom right?

@RyanHarrisRC

5 жыл бұрын

They are from stickit1

@giuseppe_explores

5 жыл бұрын

@@RyanHarrisRC Thanks man! Keep up the good work, I have a similar story, got out of the hobby for awhile and now im getting back, everything is so different, more advanced, exciting lol. Maybe a video suggestion, Difference in driving your 2w vs 4w buggy and what you may have to do differently driving the 4w around turns and such. Thanks again!

You have worn the hat before because I remember loving it. I'm a bmw guy too! E39 m5 here ✊

@RyanHarrisRC

5 жыл бұрын

Nice! Haha I honestly forgot. Thanks for keeping me straight 👍

@lawrenceshields8791

5 жыл бұрын

@@RyanHarrisRC I got you bro

has anyone ever swapped in a center diff in a rc10b64

Dang this is back when he had a real modern race buggy!

Good luck for JC INS