Setting up a Raspberry pi Player to be a PiSignage Screen
Тәжірибелік нұсқаулар және стиль
Looking to setup your Raspberry Pi to work as a digital signage screen with Pisignage? we got you covered in this video!
🔗 Links & Resources
1. github.com/colloqi/piSignage
2. www.raspberrypi.com/software/
Visit piSignage: Pisignage.com
Signup to get 2 free players with a lifetime subscription: pisignage.com/signup
📝 What you need
Raspberry Pi: model 5, 4, 3, 2, 1, and zero
Micro SD Card: 16GB or higher write speed of class 10 or higher
🌟 What's in the Video?
1. A guide to setup, build, register your raspberry Pi based player
2. A demo to deploy an asset to the screen.
0:00 Intro
0:29 What you need + specifications
0:40 Downloading what you need
2:14 Building and setting up the Raspberry Pi
4:30 Connecting the device to Wifi
6:20 Registering the player on piSignage
7:42 Deploying an asset
8:24 Outro
🙋🏽♂️ What is PiSignage?
Seamless, Budget-Friendly and do-it-yourself Digital Signage Solutions for every industry.
📌 Stay Connected
Don't forget to Like, Share, and Subscribe for more tutorials and insights on digital signage solutions.
Have questions or feedback? Drop them in the comments below or contact us directly through our website.
💻 Compatible with
Raspberry pi 5, 4, 3, 2, 1
Android 9.0+
Most Chromium based browsers
Most intel based systems
Пікірлер: 12
what if it doesn't bring up the screen with the code to enter / register? I put my sd card in and only get a blank screen with the letters "Pi" in the middle of the screen
If I turn the tv off the raspberry logs out, and I have to restart the raspberry also to bring it back to life again. do you have something about that?
Thanks for the video, any promo to sign up?
@PiSignage
5 ай бұрын
Every signup gets 2 free player licenses and 2 lifetime subscriptions
Thank you for the video. Just so you know, the Yeti microphone you are using to record needs to be turned around and face the speaker. You will notice at 4:17 when Rajath reaches across the microphone that his voice is clear. Here is a video for how to setup your microphone (kzread.info/dash/bejne/gq58uZiDqcXWaco.html)
@PiSignage
4 ай бұрын
Haha oops! 🙊 our next video will have this corrected! Thank you so much for the headsup!
So it won't work on clones? OrangePi, Rock64, etc?
how to reset ID, i cant login my psignage because my email has gone and that must have verify
I just purchased a PI4 so I dont need Linux OS I can just download from your site to run the OS? also They want to go back and forth on ads and TV. I can just run the ads and have someone manually change to TV input?
@PiSignage
4 ай бұрын
Yes - you can set up the Pi4 as mentioned here in the video. As for your setup - yes you could run ads on one source and as long as someone manually changes the source between TV and PiSignage you should be fine. You could also consider moving some content to PiSignage and deploying 2 playlists - one as an ads playlist and one as your content playlist. hope this helps?
The wifi-signal appears and disappears again. Impossible to connect to it
@PiSignage
5 ай бұрын
That shouldn't happen. Could you write to support@pisignage.com for us to look into the issue? Just let us know the hardware and the account and we'll take a look 🙂