It is really incredible to see how many people have no idea how to tension the timing belt properly on b series. The tensioner spring is calibrated to pull the correct amount of slack out on the right side.

@Naturalgainz

5 ай бұрын

How abiut you make a video for us mr smarty pants

@Lafue108

5 ай бұрын

@@Naturalgainz Making videos to try and make money on youtube is a waste of time.

@Goblinchi

4 ай бұрын

@@Lafue108 it is really incredible to see how many people have no idea LaFue108 is a dumb ass 😂😂

After timing everything i put #1 piston a tdc and my cam gear aligment marks arent aligned is that okay?

@Naturalgainz

5 ай бұрын

Get it right or do it twice bro. Its gotta be perfect . As someone whos broken it down 10x because of it being off a tooth, it has to be spot on

👍

Hello, I have done the timing job three times now, according to how it is done in the haynes manual and also this video, It rotates freely with a small amount of resistance(spring resistance I assume) but when I move it to tdc and examine the position of everything, the intake cam will be at tdc, the crankshaft sprocket will be at the mark(tdc) BUT the exhaust cam is one tooth to the clockwise(top goes to right if looking at motor from the crankshaft side), Is it wise to move the exhaust sprocket over one tooth? if it spins with minimal interference is it worth trying to rotate that gear one and then seeing if it spins? Worried I have messed something up. Thanks

@civilengineer2024

17 күн бұрын

Dont use this video, it sucks. The video by those guys who restore hondas is better. Use a cam gear holder tool, theyre cheap and make life a lot easier

Aren't You Supposed To Align The Timing marks before You Remove The Old Belt First????

@MrJayDM

2 ай бұрын

You can if you want but you wont be able to see the bottom mark with out having it all removed. There is really no need to set the marks before removing the belt.

Your way of tensioning the timing belt is not as described in the workshop manual 🤔.

@forensic8385

3 ай бұрын

Yes, the OP has no business publishing videos on b-series engines. This is a hack job.

D15z