No video
Setting or Changing Vend Price in a Single Price Coin Changer.m4v
www.vendingworks.com/ This is an instructional video to show you how to set or change the vend price on Coinco and Mars single price soda vending machine coin mech. Vending Works sells coin changers, bill validators and belt kits for bill validators as well as refirgeration decks for Dixie Narco and Vendo soda vending machines
Пікірлер: 27
Thank you for this! I was struggling to change the price on my soda machine at the location and just left it at $.50, but when I restock next weekend that price will be going up!
Thank you! Your video helped me out a lot!
What do the options switches do?
Great help, thanks
Would like to know more about the options switches
Here's the deal with the option switches: Switch 1: on - will accept dollars. off - won't accept dollars. Switch 2: on - accepts US and canadian coins. off - US only Switch 3: on - stores 6 quarters for change. off - stores 69 quarters for change Switch 4: on -AC/High level pulse bill acceptor interface (9-pin connectors). off - Low level pulse (18-pin connectors) Switch 5: on - No escrow return allowed (no monies are returned and credit is held until a vend is completed). off - Escrow return allowed Switch 6: on - ETS (Escrow to Select) For cigarette venders or four-price venders (set to vend on one price only). Coin return can be requested at any time prior to making a selection, or if the selection is sold out. Use on TRC-6800's with CIGARETTE SWITCH installed. off - ETV (Escrow to Vend) For standard single price venders. Coin return can be requested at any time prior to reaching vend price.
@JAlonge017
Жыл бұрын
How did you learn all this? It’s so useful. Thanks so much.
Thanks.
If you set all the price switches to the off position will the sodas be free ? Thanks for the great clear video
Can you explain the options switches?
Hola como calibro las monedas en el coinco 9300 sin el vending teaster?
Thanks for the great help on this video! Like the Bible states... a word to the wise is sufficient! Amen!!!
thanks for the video ,, ok can it be programmed to accept my city coins and return the change i leave in the middle east in Yemen . please feed me back
If you only have 3 switches then you program the price through the machine not the coin changer
Our Coinco 9300 only has three pins. How do we change the price (to $2)?
@Vendingworks
4 ай бұрын
Sounds like you have a 9300L. With that model you would change the price through the computer in the machine and not the coin mech. There should be instructions printed on the inner door of the machine
Is it possible to have a free vend with this coin mech, by adjusting those switches?
@wparkinson4
5 жыл бұрын
Is this an option? Thanks!!
@Vendingworks
4 жыл бұрын
No, you cannot set it to free vend by adjusting the switches, the lowest you can set it to is 5 cents. There are free vend kits for some machines available online.
I only have three switches, how do I find out where on the machine?
@Vendingworks
4 жыл бұрын
This is for single price only, yours is not single price. Price settings would be through the machine, and they are machine specific. There are usually thorough instructions posted inside the machine.
I only have 3 switchs?
@williamkelliher3433
6 жыл бұрын
hi, mine too...have you found any help?
If you follow this steps, will the bill acceptor price be changed too?
@Vendingworks
3 жыл бұрын
Yes, what you are changing is the vend price, the bill validator just sends a credit to the coin changer
@jakedenly8450
3 жыл бұрын
@@Vendingworks Thank you, I will give it a try and get back.
@jakedenly8450
3 жыл бұрын
@@Vendingworks Worked exactly as mentioned, thank you.