This was for Rich who was confused with electronic phasing for the rotor head....hope this helps Rich!!
Жүктеу.....
Пікірлер: 7
@eatsleepreef95654 жыл бұрын
What is a good head speed you would recommend for this heli? I’ll be running the scorpion 450kv setup.
@amitten6 жыл бұрын
I've tried the Demon and couldn't get the damn thing to work. I went with ikon and everything runs pretty smooth. Btw do you change your mix setting on your radio for multi blade heads?
@amitten
6 жыл бұрын
JestRR I'm not sure the circumstance of the guy you mentioned in the video, I'm just not used to the Demon as I am the ikon.
@eatsleepreef95654 жыл бұрын
Question. Seen this looks to be a 120deg swash setup, if the radio has no mixing since all is done on FBL why when you give it forward elevator does the swash not move forward like a regular 3d heli? The only way I can see it doing what yours are showing would be a mixing in the radio or telling the FBL it’s not a 120deg swash.
@eatsleepreef9565
4 жыл бұрын
After thinking about it. I think the only way to get a 120 swash to do what your shows is having front left servo be aileron front right elevator and rear being pitch. I believed this is called a 120deg side configuration.
@eatsleepreef9565
4 жыл бұрын
JestRR thanks much for taking the time. I will Be building one next week so that certainly clarified my thoughts. Thanks.
@roachcoachhelis63873 жыл бұрын
I finally found someone else using a Naza cool can I pick your brain for your gain set-ups please
Пікірлер: 7
What is a good head speed you would recommend for this heli? I’ll be running the scorpion 450kv setup.
I've tried the Demon and couldn't get the damn thing to work. I went with ikon and everything runs pretty smooth. Btw do you change your mix setting on your radio for multi blade heads?
@amitten
6 жыл бұрын
JestRR I'm not sure the circumstance of the guy you mentioned in the video, I'm just not used to the Demon as I am the ikon.
Question. Seen this looks to be a 120deg swash setup, if the radio has no mixing since all is done on FBL why when you give it forward elevator does the swash not move forward like a regular 3d heli? The only way I can see it doing what yours are showing would be a mixing in the radio or telling the FBL it’s not a 120deg swash.
@eatsleepreef9565
4 жыл бұрын
After thinking about it. I think the only way to get a 120 swash to do what your shows is having front left servo be aileron front right elevator and rear being pitch. I believed this is called a 120deg side configuration.
@eatsleepreef9565
4 жыл бұрын
JestRR thanks much for taking the time. I will Be building one next week so that certainly clarified my thoughts. Thanks.
I finally found someone else using a Naza cool can I pick your brain for your gain set-ups please