Awesome job! This guy has some skill, absolutely no question about that! Well done!

@vangard9725

Жыл бұрын

you do realize that the repair was mediocre at best and downright dangerous at worse. When the actual chassis and suspension is damaged in a crash that car should not be driving especially since all he did was weld an extension onto the original chassis without replacing the whole rear drivetrain and suspension. And more about those extensions he welded on, if the weld points rusted the whole rear would practically fall off or would become loose. If the car got in a crash again it's more than likely that the rear would snap off taking the bumper and trunk off with it. So yeah pretty dangerous

@KirbyDTrim

Жыл бұрын

Guy is so skilled! I wonder if he did all this in 1 day and why is he not wearing welders goggles?

@GBuild94

Жыл бұрын

@@KirbyDTrim welder goggles lol what is that 😂

WOW I was a Body man Paint man and a frame man for automobiles for over 40 years. I was considered one of the best. This guy is better than I was. At half the age. Good for you young man. He looks like he took pride in his work. This is a rare combination and his boss better make sure he keeps him.

He must have started when he was really young to be at this level now. Great job mate. Total respect bro.

This guy is not a Mechanic he's a full-blown Master Technician!💥👑

@gcvc5311

Жыл бұрын

Master Magician , if you ask me.😉

Fabulous! Insurance companies should consider him major repairs done under 10mins...cheers mate 👍🍻

@tabryis

2 жыл бұрын

The entire integrity of the cars frame had been compromised. No insurance agency in the US would give this comprehensive coverage

@johnsonluk3468

2 жыл бұрын

Looks like all damaged parts are replaced with new. The only thing that is different from the factory is the quality of the weld. This guy works for Nissan in China so the repair must be approved by the factory.

@kyle8952

2 жыл бұрын

@@tabryis No it hasn't, don't talk bullshit. This isn't even a body-on-frame car, it's a monocoque, and all damaged panels have been replaced in their entirety, and joined in the factory weld locations. It is no different from a newly built shell.

@Matt-nq4du

2 жыл бұрын

@@kyle8952 The fact that he's using the frame puller after welding on the new panels and subframe pieces tells me otherwise. They don't do that at the factory champ

@theshield1613

2 жыл бұрын

@@johnsonluk3468 most cars In the U.S dealerships sell wrecked cars and no accident report for most vehicles.

Hard to believe you did all that in 6 minutes and 32 seconds. 👍

@globetrotterbengaluru

Жыл бұрын

No need to be sarcastic. He did a good job. Your joke aka sarcasm isn't appreciated.

@brianpeterson1962

Жыл бұрын

I thought it would take him atleast 8 minutes he is fast for sure

@tyndalewashington8457

Жыл бұрын

Totally childish and in poor taste!

@tekkeat1457

Жыл бұрын

Now you try to do that in 6 minutes and 31 seconds.

@klaushorn8557

8 күн бұрын

0:17 😅

You sir are a master craftsman! I build race car chassis and appreciate the effort you put into doing job right

@wilfredocaban3542

Жыл бұрын

Would you drive in the back seat after those welds .

Não acredito!! sozinho desmontou, a parte amassada, e remontou tudo com perfeição. Este cara é um genio!!

@sempregalo8839

Жыл бұрын

Vdd

@drewh3224

Жыл бұрын

He is skilled, talented, and a young handsome man. What's else anyone asking for!

@vangard9725

Жыл бұрын

@@drewh3224 surely you guys do realize that the repair was mediocre at best and downright dangerous at worse. When the actual chassis and suspension is damaged in a crash that car should not be driving especially since all he did was weld an extension onto the original chassis without replacing the whole rear drivetrain and suspension. And more about those extensions he welded on, if the weld points rusted the whole rear would practically fall off or would become loose. If the car got in a crash again it's more than likely that the rear would snap off taking the bumper and trunk off with it. So yeah pretty dangerous

I would never knowingly buy a crashed car. This young guy certainly has super level skills though. Respect.

@jma7617

Жыл бұрын

Youre right. You never know how they fixed it. This one is as safe as the 1st day it came out of factory though. He just welded new panels in place of old one. Just what the factory does, weld all panels together. Now if he had repaired structural rails, then it would not be safe.

@adamv242

Жыл бұрын

I'd still never knowingly buy a car repaired like this.

@ShuotongLi

Жыл бұрын

If you have the knowledge to evaluate a crashed car you can still safely purchase cars with minor accidents. Minor means no frame damage so the structural integrity is not compromised. For cars that unfortunately had structural damage(the one in video is SERIOUSLY damaged), it’s impossible to restore original crash worthiness, but they are priced accordingly as well. Depends on the buyer’s circumstances they’re still safer than motorcycles.

Craigslist china : Nissan Sylphy. One owner runs and drives like new. Female owned. No rust or dents. Super low miles. This one is going fast.

@customjwarriorcustomjwarri2960

2 жыл бұрын

Price

@adamh7972

2 жыл бұрын

LMAO, I was thinking this the entire time!

@baderalshehri4203

2 жыл бұрын

😂😂😂😂😂👍

@diciplinex7407

2 жыл бұрын

After mechanic like this I wouldn’t worry about safety in this car

@mahfudmahmuddin3161

2 жыл бұрын

Bruh even if he came out straight, i would consider buying if he included video of the repair in the craigslist👻

Simplesmente espetacular, ótimo serviço executado com muita perfeição! Parabéns!😊🇧🇷

@toxichammertoe8696

Жыл бұрын

Dude, that car's Structural integrity has been compromised, its basically a death trap

dude protect your eyed when welding

@MichaelRoberts-ot9vd

2 жыл бұрын

The helmet is not only your eyes but directs fumes away from being inhaled.

@Kakovac

2 жыл бұрын

@RL CL definitely not. Covid mask bs is bull crap but I can tell you what he's doing he will be blind in no time

@louispd6828

2 жыл бұрын

My same thoughts, he is to become a one eye body repair tech soon...

@NordlandMTG

2 жыл бұрын

Mask are helpful in both cases.

@jeremywallace5961

2 жыл бұрын

@@NordlandMTG actualy not, that mask is NOT for smoke protection, only particles which is why they are not very effective against viruses...

This guy knows where exactly each and every stich of OEM weld marks are and to have access to all the parts that he could gather and redo everything is amazing. He's so super at his work too.

@jeremywallace5961

2 жыл бұрын

Thats because if he doesn't he will be executed...

@littodevilish

2 жыл бұрын

The OEM spot welds are visible so body guys know where to drill to remove them 😅😜

@fabulousprofound

2 жыл бұрын

I thought place he works at is an authorized Nissan repair facility?

@alcasey3551

Жыл бұрын

@@fabulousprofound Indeed it is and the parts are OEM Nissan.

@Cryaboutmyhandle

Жыл бұрын

Because that's the job, what's it like having a room temp iq?

Impressionante. Parabéns meu jovem pelo ótimo trabalho!!!!

One of the best collision specialists I have ever seen.

I love it! Much respect to mechanics who perfect their craft!

So fun to watch how he uncrash and restore metal shaping. Also expert in jig saw puzzles. Respect!

Excellent mechanic skills. Thank you for solving everything within a short period of time. Sign of maturity.

Мастер шикарный, и всегда с улыбкой

Amazing and straight up brilliance! Truly

OMG!!! Nothing but pure craftsmanship and talent. Awesome job.

Gorgeous! Fantastic job!

This would be considered totalled in the US for the labor costs alone, but watching this repair was impressive, with the fit and finish of the panels *better* than OEM.

@jeremywallace5961

2 жыл бұрын

Labor costs are not an issue in communist run countries...

@thrash1337

2 жыл бұрын

@@jeremywallace5961 Your social score just dropped. Winnie the Pooh has been alerted about your online misdemeanor.

Wow. Amazing work.

Panel beating used to be my old job. This guy is amazing. He deserves a raise. 👍

Wow, we need good workers like that here in the US.

Esses caras são demais, muita conhecimento ferramental e qualidade técnica

Наконец то вернулся наш улыбчивый друг))

As a ex panel beater and chassis repair specialist this amount of realignment is very dangerous.... This vehicle has no structural integrity left

@eduardoarty1228

2 жыл бұрын

For some reason they don’t do it in the 🇺🇸 that car is totaled not even salvage that shit is gonna run sideways 😂😂😂😂

@davewalker1070

2 жыл бұрын

Trudat

@youcantmakemetosuscribe4745

2 жыл бұрын

@@eduardoarty1228 why its gonna run sideway?

Был горький опыт, отремонтировали подобным образом 5 лет уже езжу, полёт отличный, не ржавчины ни трещины. А все потому что силовая часть автомобиля не вырезается а лишь внешняя часть, т. е. Крылья и различная обшивка. Молодцы!

@user-ki4zy7hr5l

Жыл бұрын

Конструкция наверное сильно ослабевает?

@user-ox1km3fc8u

Жыл бұрын

@@user-ki4zy7hr5l нет, на заводе посмотрите, собирают так же, не все автомобили, но есть модели у которых есть жёсткая часть а есть внешка в виде крыльев

@user-ki4zy7hr5l

Жыл бұрын

@@user-ox1km3fc8u я имею в виду, что выпрямленный металл, был гармошкой, рёбра уже переломаны.

@user-ox1km3fc8u

Жыл бұрын

@@user-ki4zy7hr5l с ровного донора берутся крылья и все навесное, если лонжерон загнуло как на видео то вваривается новое, у меня лонжероны были целые, только кузов искорëжен. Я не сталкивался с заменой лонжеронов, судить не могу хорошо или плохо их замена, а вот замена внешки это норм. Старую внешнюю часть можно сдать на металл.

Parabéns você e um excelente profissional que Jesus abençoe grandemente.top demais seu serviço Parabéns

That was amazing love from England 🇬🇧

Perfeito! Serviço de primeiro mundo!

@toxichammertoe8696

Жыл бұрын

Yeah service to an early grave

Impressive work and brilliant to watch 🤩🤩 well done and thank you for sharing 👍

كل الحب والود والإحترام لفريق العمل هذا ، في بلادنا نقوم بالتصليح بدون تغيير الأساسيات وبإحترافية عالية جداً . All the love, cordiality and respect for this work team. In our country, we do repairs without changing the basics and with very high professionalism .

I wish you would make longer videos, this guy is awesome in his work. Love these videos when their fixing these cars.

Sou fã demais do trabalho desses caras 👍🇧🇷

Gives an excellent insight into car repairs. Good on ya mate👍🙏.... A tip....check the gap between the wheels and the arches, wheel well of the car...bent frame and it's different gap readings. 🙏👍

Ficou show de bola, profissional de primeira qualidade

Oficina da própria fábrica?? Muito bom o trabalho deles!👏🏼👏🏼👏🏼

Truly Amazing at your skills 👏 But protect your eyes for long term use ... the harmful light from welding penetrants the eye lids and has a cumulative effect. 👍😎👍

Amazing work bro, brilliant 👍

Very professional, clean and tidy job.

Caramba tu é bom viu tenho orgulho desses caras assim

Wow that's awesome this guy he's really doing a great job he's really active and I can see he's really professional

Excelente trabajo y video gracias por compartir tu gran esperiensia desde costa rica Maestro

Great repair and fascinating to watch, I used to do work like this in the early 80's. The problem for the near future will be rust. After welding, in the original manufacturing process cars are dipped to get a seal inside all the hidden box sections at the backside of welds where the metal has been oxidised. This repair has rust pre-built into many structural areas and won't last long.

Parabéns ótimo trabalho você tem 👏👏👏👏👍

Wow you guys do it all!

Definitely doing it right. Take it all the way back to undisturbed metal, drill out factory pinch welds, remove damaged skins and replace.

@evrik796

2 жыл бұрын

Если забыть про то что черный транспортировочный грунт надо удалять перед покраской то наверно и кажется что делают все правильно...

Je reconnais le métier que j ai pratiqué 44 ans. Super boulot, et un artiste de carrossier👌👏👏👏👏👏🇲🇫👍

O cara é muito profissional!

Parabéns lindo trabalho

Totalled car back to life. Amazing skill!

Love watching these repairs. Well done

It's great to see a car that's not considered" totaled", when the rest of the car works good.. Amazing work. Maybe some extra reinforcement in critical frame areas though

@audrunasgruslys9243

5 ай бұрын

A “totaled” car does not imlly totaled components. Ofte ditching a broken body is the best approach

Amazing, I never saw him once pick up a tape measure and check the squareness, does everything by eyeball and all the gaps are within 6mm.

@adriann9027

2 жыл бұрын

You mean within 6cm? :D

@Neildo430ci

2 жыл бұрын

A skosh.

@rdgreen5967

2 жыл бұрын

He doesnt have to check. Each panel is literally brand new from factory. If it is not square, it wont align/fit well.

@mkm692

2 жыл бұрын

@@rdgreen5967 I watch somebody do something like this years ago it all starts with the frame rails and when the frame rails get bent and they’re not square nothing is going to line up correctly. And certainly not down to a quarter of an inch or less. That’s why when a car is made at the factory the frame rails are put in jigs and are lined up perfectly with crossmembers and then everything is spot welded while in this jig.When the frame is released from the jig, measurements can be taken crisscross from one side to the other and the measurements should be identical.Kind of like when a carpenter measures a door for square, if the frame is not square the door is not going to line up and close right.

@richiebasdeo1480

2 жыл бұрын

Yeh no tram no x measurement but perfect gaps bullshit

Что можно сказать если и так все видно,работа супер 👍👍👍

@abbasaziz4561

2 жыл бұрын

نعم العمل رائع بحق..لكن هذا فقط في الصين أما بقية الدول الاخرى فصعب جدآ لانه لاتوجد مثل هذه المواد الاحتياطية ألهيكلية...تحياتي من بغداد ألعراق

@Bublik.001

2 жыл бұрын

@@abbasaziz4561 согласен

@101picofarad

2 жыл бұрын

@@abbasaziz4561 теперь любой человек из глубинки может читать комменты на багдадском ;)

These guys are awesome. They can do anything to make it look like brand new! Thanks for a job well done…

Good work, you two are Amazing

Outstanding! This guy is a mechanic, an artist and a master craftsman!

@flitsertheo

2 жыл бұрын

Exactly the man you need for dodgy repairs.

@michaellombard894

2 жыл бұрын

@@flitsertheo or Plymouthy repairs!

@waynecrothers2012

Жыл бұрын

He is top notch at his trade,very clever,diligent young man....respect

Profissional! Parabéns!

Excellent, incredible restoration

Cara vc é incrível! Muito bom! Parabéns! Nota mil.

Repairing by going back to the very component and method of assembly from factory not only maintains the safety of the original factory safety standards but also keeps jobs and saves the environment by reducing pollutions, minimising energy used to manufacture new products/ transporting it and to recycle the waste. Throw away and laws preventing repairs (totalling/write off etc) is to increase profits.

@Mrhellacat

2 жыл бұрын

Truth. Major issue in the tech industry too. So many companies use the idea of "safety" as an excuse to screw over the consumer and pass useless laws that serve to make them more money.

@steelisthemeal

2 жыл бұрын

True

With knowledge and tools everything is possible. Great job! 🇨🇳

@stanleyyager4941

Жыл бұрын

Yes, tools, knowledge and adecuate and correct material and parts.

You really are a teacher in the repair of the car actually the top of the magnificence and the real beauty you are good. 👌👌👌

Very nice job. This car is safe to drive again. Thanks for your nice videos.

@user-ez5mn1rq1m

Жыл бұрын

Seriously doubt it's as safe as before. Modern cars aren't meant to be repaired like that. Looks nice though.

El mejor técnico que he visto . Su experiencia es asombrosa

@user-gj2wj6hm3j

Жыл бұрын

Hay quedó listo para otro vergazo esos pinches carros ya quedan salados

Интесно как они размеры все выдерживают, варят всё сразу не парятся и всё ровно получается. Работа класс 👍

@nurlansha7406

2 жыл бұрын

Действительно работает класс. И быстро. Наши мастера месяц тянуть будут и в итоге гавно накидают полтонны.

@user-yl1zp5kp5k

2 жыл бұрын

Думаю ,там все заранее подготовили ,чтобы видео не было длительностью три дня.Да и авто конструктор все панели заменил, четко и быстро.Там никто не будет заморачиваться искать бу донор и так далее все быстро.

@AAA77771

2 жыл бұрын

Меня больше интересует вопрос где они новые внутренности брали, видимо напрямую с завода заказывали. И тут же возникает вопрос, а так можно?

EXCELENTE TRABALHO ,DÁ PRAZER EM OBSERVAR ,PARABÉNS . DESDE BRASIL .

O cara tem um conhecimento e uma habilidade incrível.

И на авито! Не бита не крашена, бабушка за хлебом по выходным ездила! Отличная работа 👌👍👏

@user-en2gg9nv1y

Жыл бұрын

Да не бита не крашена вся безопасность на месте .в случае удара сложится как карточный домик ....но работа конечно класс трудоёмкий процесс

@Nikolajs-ek9yb

Жыл бұрын

Не удивлюсь если эти ребята,такую работу за пол дня сделали😀,молодцы!!!

Just brilliant! Very skilled. I wish I knew someone who could do that for me.

Wow!! Superb job!!! Thoroughly enjoyed watching this....

that was epic

Having the frame rack plus knowing how to deal with the stitch welds is key. Very interesting stuff! ✊

This guy is a Master, Respect to you Sir.

Wow 😳 that's an amazing job and I never would have thought it would look that good 👍

Ficou muito top

Ушел ниссан во Владик, на зеленный угол, Ванька его его уже продает

Muito bom o serviço seu parabéns isso que é um serviço bom

Parabéns pelo serviço sou do Brazil

This guy is awesome...knows what he is doing and just does it...to perfection...that is hard to find today...due to the fact everybody wants done right now,great work..

I must say that this guy did an incredible job. You can repair most any thing if you have the right tools and intelligence plus the desire to do a professional job because your name is on it. Fantastic work. A plus my friend. 👍🇺🇸🇺🇦

Молодец ☝️ золотые руки 🤝

Amazing results. Wish I could do as quick as this chap 👦 🙄

A true craftsman, we used to have good tradesmen like this...a lot of the working population & businesses can't be bothered these days.

@momtenjillian987

Жыл бұрын

Are you kidding? The U.S.skilled labor force is second to none. Where is his skill for protecting his eyesight? Typical 3rd world country with ZERO standards to protect its workforce. Let me guess, you are a republican with no respect for labor. Are unions an evil enterprise to you?

@georgechecker4941

Жыл бұрын

@@momtenjillian987 you got a very good point.

Great job, well done. The main thing is that there are spare parts. If they are not, then it is very difficult to repair it.

@davidfagerberg9283

Жыл бұрын

No shit, Sherlock

Outstanding! A very young man with skills like that.

Incredible job!! Very young man to be such an artisan

Филигранная работа кувалдой! ; )

Yes I agree he does amazing work fixing these mangled cars. But I wonder if that’s safe ? in the USA a car like that would be declared total loss and I wonder if doing all that work labor and parts exceed the value of the car ?

@niro5053

2 жыл бұрын

This car is total loss to my opinion as well i dont want to know what will happen in the next crash behind this car.the chassis was damaged , theres thing you just dont repair

@xavilopez4716

2 жыл бұрын

@@niro5053 that’s what I’m saying . 👍

@Jeroensgambling

2 жыл бұрын

The repair you see is pretty much a optical one, and cant be compared to how it really should be repaired or simple put as a total loss. The frame obviously took a dent, and i bet there has'nt bin any analysis other then the back of the car. It wont perform as intended in a second chrash; aluminium frame has just bin stretched out to it's original form and thats it. Simular as chrashing a can the first time. It's difficult. Now put the chrused can back together as much as you can, and chrush it again. You'll see the 2nd time its alot more easier. Thats pretty much what this car is all about.

@xavilopez4716

2 жыл бұрын

@@Jeroensgambling I guess they have different laws and DOT regulations in those countries . But yea if the chassis is bent or mangled it won’t perform the safety as when original from factory.

@Jeroensgambling

2 жыл бұрын

@@xavilopez4716 So from i understood from USA is that some written off cars are simply put to states where they have low regulation and being brought back into the market. Same as "water flooded" cars. We see it in europe too; it's a mass scale scam really, buy chrashed / written off cars, apply a repair and re-sell for market value with profits obviously. Next buyer woud'nt even know the history of the car. its not a joke to drive around in a chrashed car. Ive bought a merc cabrio one day; looked OK and it did had warranty. Once i had it and attempted to install a subwoofer i realised the car had bin in 3 different accidents, front, side, rear, with all poorly done repair jobs. Now the part where you and your passenger normally put your foot down, was absolutely rusted up and standing on it just crushed with your foot going straight through it. How on earth did that pass through MOT here in Portugal. For a price class of around 12.000 euro you expect something decent but that price was only based for being a "mercedes". Lol. I gave the dealership the worst of the worst and traded in the car. This is so utterly dangerous.

Trabalho primoroso parabéns!

Except for camera work, he is one man show doing restoration work from A to Z👌

Brasil está longe de chegar nesse nível de profissionalismo, onde adquirir essa base onde são colocados os veículos para reparação. Parabéns pelo alta qualidade.

@jpmerces

5 ай бұрын

Essa base e uma versao mais evoluída do famoso Cyborg. É como se fosse uma mesa de.alinbamento com vários pontos para a ancoragem do gancho. Nunca vi uma dessas em oficinas aqui. Talvez porque nao valha a pena

Крутой чувак у нас бы делали в России так машины

@Rysev1983Artem

2 жыл бұрын

Да есть у нас такие же ребята

@user-ur3th8ig9x

2 жыл бұрын

Да у вас так и делают, на заводе

One can't help but be impressed with his skill set, especially given his age. That said, I take a dim view (no pun intended) of the long term damage he can be doing to his face and particularly his eyes (retinal damage) by M.I.G. welding without a hood.

@JG-fi9ub

Жыл бұрын

I've known exhaust shop workers that weld 8-10 hours a day 5-6 days a week for years with no protection and no known problems. That said I weld on occasion and will absolutely not make so much as a tac weld without my mask on with safety glasses underneath to protect from sparks. Its just not worth the risk.

Fantastic job wish uk body shops were this good

Es un chingón ese muchacho y como siempre con su sonrisa, saludos desde México.