I love how we gloss over the fact that Warped Perception (who isn't even inherently a car youtuber) casually owns one of the most iconic and sought after vehicles of all time AND is willing to do random experiments to it just because we as the audience asked nicely. you are a legend my friend, never change ;)

@thebowtieguy777

2 жыл бұрын

kinda warps your perception of wjat car enthuisist are

@WarpedPerception

2 жыл бұрын

@@thebowtieguy777 that's a great way too look at it.

@WarpedPerception

2 жыл бұрын

Thanks! I actually had 3 supras at one point, also had an FD3, 88 TT rx7, 91 TT Rx7, GTR, Nissan 240 slammed... drift car, E55 AMG another iconic car and the 1000HP Tesla.

@user-nd8cs9ph4t

2 жыл бұрын

@@WarpedPerception casually has all the iconic JDM cars and doesn't flex on it, ultimate chad

@lance_the_avocado9492

2 жыл бұрын

@@WarpedPerception HOLY MOLY

Turns out, compressed air looks pretty much like uncompressed air. Who would've thought!

@volvo09

2 жыл бұрын

It's about as exciting as I'd expect :) Curious to see how long it takes for some oil to make it a way in there. Other than that, don't really think there's going to be a lot to observe!

@delta-tuning

2 жыл бұрын

I mostly wanted to see if any oil or moisture accumulates inside it.

@WarpedPerception

2 жыл бұрын

Well that's why I do these videos, I'm glad everybody thinks that because the final result is going to surprise everyone. I designed a lot of these episodes around the term Warped perception, or at least I try my best to, sometimes they are just genuine curiosities. But if you look up in the sky on any thing but a clear sunny day, you will see that air does in fact take on different forms depending on the conditions, and air moving under a lot of volume and pressure does very interesting things from a fluid dynamics perspective. Let me give you an example, if you see a fighter jet Bank a sharp turn, you see the vortices form in the low pressure regions of the wing crevices, that will happen no matter what the temperature outside or the humidity level. Because the flow Dynamics are way outside the parameters of regular clear atmospheric air that's moving at low velocity and equal pressure. (Edited because autocorrect didn't always suck so bad.)

@WarpedPerception

2 жыл бұрын

Yeah I thought the same thing, I actually thought that my intercooler had a lot of oil, but I forgot to include that clip of where I put the camera inside of my old intercooler, it was actually dry.

@MrArcticPOWER

2 жыл бұрын

@@WarpedPerception This was just a little joke, I love what you do and I'm excited to see how it looks on the dyno. The fab part is entertaining enough for me to watch.

Could you some how put a temperature gauge on both sides of the tank to see how the differ. Great video can’t wait for the next part. 👍 (edit) as you see in his new video how the TEMPERATURE on each side of the intercooler differs..

@Mrshotshell

2 жыл бұрын

You can buy dual air temp gauges for that exact purpose

@Polygonblasting

2 жыл бұрын

Very easy to do using thermocouples and a digital output reader. Did it on my car and it's cool to see

@BWADaniel

2 жыл бұрын

That's a great idea. I hope they do it! If it was me, I'd have it there anyway just for a piece of mind.

@gameonyolo1

2 жыл бұрын

I agree

@381delirius

2 жыл бұрын

he should put that temperature sensitive plastic for visual effect

I think you just need to add some colored smoke to see how the flow behaves

@WarpedPerception

2 жыл бұрын

That's coming

@scotty305

2 жыл бұрын

@@WarpedPerception thermal imaging would be fun, to show the temperature of the intercooler core during a dyno pull. Especially if you can edit the shot to clearly show the core thermals and the airflow in the same frame.

Never seen anyone pull apart a Supra front end with such little care.... I love it !! 👍👍👍

Heart in mouth moment here 4:30 😳 Glad you got it out the garage for these awesome shots, Matt 👏🤣

@hankpns

2 жыл бұрын

@@1u-77 the one x2 is better than the gopro max

@DavidB-tw9tp

2 жыл бұрын

@@1u-77 didn’t Insta360 release a 360 camera first? And then GoPro came around and also released one - not sure who‘s the copycat here

What I liked the most is that we got to see how an intercooler core becomes an intercooler for a vehicle. That was awesome.

On a random note, I think the rear diff housing on the Supra may need some bushings. I understand there's a good amount of torque being applied but it seems to have decent amount of deflection between its loaded and resting state @4:10

@WarpedPerception

2 жыл бұрын

Good eye, I'm going to get that done before part 2

@jimmygriffiths

2 жыл бұрын

Diff bushings are my nemesis. Spent 2 days on a friends driveway doing one in my E46. I am happy to share my experiences though: 1. - be stronger than I am. 2. If you are going to use an impact driver and a cheap bearing puller set, spend the time buying correctly sized and correct hardness forcing screws. Messing about with M10 threaded rod lost me hours.

Excited to get this thing on the dyno!

@WarpedPerception

2 жыл бұрын

Me too ! I'm working on beefing it up right now... It's going to look even more ridiculous in a good way.

@Wisconsingrandprix

2 жыл бұрын

Man ams is the best! Glad you are doing some work with those guys.

Christmas Day 2021 I lost 1/2 of my right middle finger as well as part of my right thumb. Setback but not devastating. For me it is really cool to see where you are and what you can achieve, currently in your life. I just happened to notice our hands look similar, and I am interested in you story 🤙

Idk what's more interesting to me, the fact that he made a see-through intercooler which has nothing visually interesting going on in the inside. Or the oddly satisfying work he has done to build this thing? No but seriously his work was flawless.

@WarpedPerception

2 жыл бұрын

Thank you very much. Well we don't know what we're going to see until I turn up the boost, whenever things get into the extreme zone they usually become visible in some way and sometimes unexpected ways. As for the work, I appreciate that! It's a bittersweet disease, it has to be near perfect else I just can't move on..☹️. In the past I would have never even posted this video because of the tank failure before the actual dyno test, but so many people asked me to just post the videos in segments if needed so yeah.. thanks again

@lukekans4570

2 жыл бұрын

@@WarpedPerception you just cassualy toss a see through intercooler on your fat turbo Supra, an icon of a car.

This is why your one of my top 5 channels I watch . Unique ideas , killer photography usual straight to the point.

@WarpedPerception

2 жыл бұрын

Thanks!

@Aeacus.

2 жыл бұрын

They're unique because they're so stupid no one else bothers to do it.

Throw some colored smoke so we can see what it looks like from the inside, if it's not harmful for the engine!

@zfloz9895

2 жыл бұрын

Exactly! Otherwise, the whole effort was for nothing. :(

@SecretSauceyjuice

2 жыл бұрын

This.

@goracks69

2 жыл бұрын

This is the comment I was looking for.

@Top10girl

2 жыл бұрын

I was assuming this was part of an April fool's video. Part 2 drops April 1st?

Wow! What an experiment! We can now see air.

@WarpedPerception

2 жыл бұрын

You will be able to don't worry

@WarpedPerception

2 жыл бұрын

Honestly we really got to look at it with the high speed camera... Then we're going to see some stuff happening I think it's really going to surprise everybody

This guy passed the vibe check. Subscribed!

I loved the energy of the two guys that foot raced you. Cool dudes.

I'm impressed by your skill set and your tool collection.

@WarpedPerception

2 жыл бұрын

Thanks! Trying to get this one done now after getting very sick.

Curious to know if the thrust from one of your hobby turbo jet engines is able to turn an actual turbo sufficiently to provide boost to an internal combustion engine. Next project idea.

@roachwerks3043

2 жыл бұрын

Energy in must be greater than energy out. So for example a 2hp aux engine is not going to create more than 2hp

@nothingtoseehere4026

2 жыл бұрын

@@roachwerks3043 Correct, but static thrust doesn't measure work (hp). I'm betting those 100 lbs of thrust engines are a bit more significant. Adding fuel to the internal combustion engine to match the boost might get tricky. That's why I said "significant" boost.

@gadnuk7159

2 жыл бұрын

@@roachwerks3043 the energy the turbo uses to compress the air will not be greater than the energy output of the exhaust used to turn it, but the energy “created” by the turbo actually comes from the extra fuel that can be added to the higher density air. So in reality the increased hp is from the fuel, not the turbo. As long as the jet engine’s exhaust provides enough wnergy to significantly increase intake pressure, more than 2hp can be gained.

@WarpedPerception

2 жыл бұрын

@@roachwerks3043 it may work if Im Able to match the tubing up correctly

@WarpedPerception

2 жыл бұрын

@@nothingtoseehere4026 your correct

I'm glad to see that you're posting. I saw the video where you talked about personal obstacles. I'm glad that you bounced back.

This is what i always wanted. Thank you❤️❤️. Need more

excellent video ! ...it would be interesting to be able to observe the difference in temperature on both sides of the cooler... congratulations on this new work.

Man, the fact you manufacture your parts if fucking awesome, keep it up 🤙🏻

@WarpedPerception

2 жыл бұрын

Haha... Thank you ! I appreciate that.

BEST montage edit on youtube. Damn this production is so clean, on point and well explained.

It's incredible how much work and love is in these videos. Keep it up man

You should put thermocouples before and after the intercooler to see how effective it is

@Mattspips

2 жыл бұрын

What about pressure too?

@crazyeyez1502

2 жыл бұрын

Hopefully you watched the next episode?

I mean the dude designs and fabricates pretty impressive mock-ups. Nice Supra too! 👍

@Ola4family

2 жыл бұрын

True but it’s kinda scary that kind of knowledge might come at the price of a couple fingers tho! Joking aside.

The amount of work and dedication for one video is intense, deserves a like!!

Bro this video does a GREAT job of showing how genius the intercooler is. I never realized it until I paused the video and saw how it worked. Awesome.

Remember the deal when we use to use water injection & I see folks asking about colored smoke, but u can’t do that because of damage that it could do to ur throttle body & other what nots so out of the discharge of the turbo u could hook up a water jet (window washer pump or something like that) & inject that way & see what happens, idk I’m not a rocket scientist or a smart ass but I’m thinkin about crazy things all the time & ur whole concept is spot on & good luck to ya sir .

With some smoke to see the flow would be crazy 😂😂😂

Really love the next level build quality. Great editing that CNC / CAD montage!

You’re a true genius and visionary. Kudos

Be careful driving when your turbos are not able to build pressure on the intake side. I did that for only a couple mins. Turbos over-sped and immediately burned the bearings up and the turbos had to be replaced. Wasn’t pretty. 😂 actually wasn’t my fault. A mechanic at the dealership forgot to tighten the clamps on the intercooler lines after some work. Popped right off. Luckily the dealership covered the $13k repair bill.

@xav1uz

2 жыл бұрын

13k?? do you drive a ferrari or what

@TsunauticusIV

2 жыл бұрын

@@xav1uz I wish. Lol. It was on a F150 with an 3.5 ecoboost platform in it.

@yungdomino4718

2 жыл бұрын

@@xav1uz No he gets his work done at the stealership exclusively

@aj2858

2 жыл бұрын

Sorry, but is the first time I hear that a turbo burn because of loose piping... to me sounds more like a fail bearing seal, shaft or lack of oil for the lubrication to do it's part. Most people forget to "cool" down the turbo rpms after a run.

@TsunauticusIV

2 жыл бұрын

@@aj2858 if you have no pressure building to maintain the turbo speed… it will continue to gain speed… since it’s still being pushed by the exhaust side. Turbos will overspeed and can burn the bearing out in short order. This was the ONLY change to the vehicle and was the only possible cause. If you still do t get it… google “turbo overspending”. It’s known as the “turbo killer”. If you STILL don’t understand… I’m afraid that you are in possession of a severely underdeveloped orbitofrontal cortex and there is no hope for you. 😂 have a stellar day bud.

That's cool and all but kind of car is that?

@WarpedPerception

2 жыл бұрын

85' Chevy Caprice...lol

@mysupergang4175

2 жыл бұрын

@@WarpedPerception alert Feb and the other day

@feildcar4578

2 жыл бұрын

Wouldn't be hard drill a small hole and put an instant read thermometer with some silicone. Hondabond is some of the best rtv you'll find and is what I would use.

@btucampbell1591

2 жыл бұрын

@@WarpedPerception funny funny 😂😂😂 I got a 90 caprice

@josephbaptiste6034

2 жыл бұрын

@@WarpedPerception is seeszzsssssssssssssssssssssssss ss ssssss ft ft byrss CT CT iIbiyi uikviviu

This is quite possibly the coolest video ever

Loved the Build Edit!

i was watching cutting edge engineering austrailia (i think) and he just bought an old swiss precision machine and i was watching it and i saw the spindle wobble. he explained about how a dril moves the tool to the work and a mill moves the work to the tool. i watched a gresham lecture yesterday about cycloids. not saying any of it adds up or match but was thinking about how that rolex mill cuts a perfect circle when it is spinning in place yet you introduce what wants cut a little along the x all the while you are adjust the y. jag out rectangle the hole but cuts so sweet?

@NGC1433

2 жыл бұрын

It's a question of resolution. At which pixel count does circle becomes a circle on a pixelated screen. And the tool is not square itself, it cannot "jag oit a rectangle" even if you want it to.

I feel like your going to have a hard time keeping those top and bottom end pieces on when you start to run any real boost.

@WarpedPerception

2 жыл бұрын

Yes, but I have a plan from my rocket work.

@nitrosrt4

2 жыл бұрын

@@WarpedPerception i think they need to interlock somehow, keyed in there, and then sealed.

Love that fabrication work

The way you fabricate and built things is fascinating as well. learning by doing. thank you sir for the footage !

Are we actually going to see the air?

@WarpedPerception

2 жыл бұрын

Yup... You will see air starts doing some crazy things once you pressurize it. As I explained in the video I wanted to do it in this episode but I couldn't get the car in the dyno because AMS is in Texas 2K, plus I got very very sick yesterday, very sick while I was filming so I just couldn't do it.

@deleteduser3749

2 жыл бұрын

@@WarpedPerception feel better man.

@ifell3

2 жыл бұрын

@@WarpedPerception hope you get better, can't wait to see this one!

4:32: Don't see any water in it.

@1187titanium

2 жыл бұрын

Air to air cooler

@DavidJohnson-hg1mz

2 жыл бұрын

🤦‍♂️

@infernalGotYou

2 жыл бұрын

This guy is correct tho, I don’t see any water in it either..the facts this is normal is irrelevant.

@Rose.Of.Hizaki

2 жыл бұрын

@@infernalGotYou The absence of evidence is not evidence of absence

@ChrisLesmerises

2 жыл бұрын

Theres a liquid line visible, but I'd bet you it's just from the abundance of adhesive used to seal the bottom part of the tank right there. Not water.

Yess a video with the Supra!! Good video. they are always entertaining

your a madddddd scientist love it

Bro how coulnot a tank will not hold that pressure are you kidding me, i hope you realize that boost is actually really really low pressure for anything beside air intake on a car, a bottle will hold like 8 bar…, a baby could handle 1.5 bar for sure…

@tazz1226

2 жыл бұрын

How 15 psi will be thousands of pounds of force if 15 psi means 15 pounds per squarw inch.. you have a tank of idk 100 inch^2??? Lmao

@WarpedPerception

2 жыл бұрын

14" x 5" = 70sq in x 15 PSI (Pounds Per sq Inch) = 1050 pounds of static force on that one side.

@briankachelman

2 жыл бұрын

@@WarpedPerception math doesn't lie, nice.... as you showed, need to take in the entire volume of the space... Dude wasn't looking at the big picture, just one inch. lol... Oh well, awesome video! I can't wait to see the tank when you're on boost!!! I always love your Supra videos! Keep up the amazing work my dude!

@7evYT

2 жыл бұрын

I'm sorry Tazz, but this is hilarious.

@toreyweaver9708

2 жыл бұрын

@@tazz1226 yew skipped maths eye sea

That was Exciting Bro! Really fun to watch

great to see you back! keep the videos coming! can't wait!

This is masterpiece!

It's a lot of fun watching you make stuff. Good luck with it bud

The turbo whine is sooo nice

Glad its split. Thanks man

This video showed up in my feed. As a former 3S-GTE owner & tuner, I salute you.

That's awesome man 👍

Awesome! Looking forward to part 2 💪💪💪

this man 1000% genius approve

This guy is unintentionally low key badass af

That's a clean supra 🔥

Dude like wtf! You really are the man. You really make all of our dreams a reality

Awesome idea!!! 👍👍

So cool, keep up the great work!

Nice content. Love the quick build of the tanks.

man u must be so cool to hangout with. awesome content man loving every one of your videos!

@WarpedPerception

2 жыл бұрын

Lol.. thanks

Youre the true Genius.

Wow, Insta360 has been making innovate products! Love the shots!

awesome! I always liked seeing the supra intake fogging! Great Stuff!

Now this is quality KZread content rigth here, very nice craftsmanship.

Love the content!

Love ur concepts

This is really cool

Work skills💯👍👍

Nice stuff man!!!!!

I’ve been wondering the same thing man!! Thankyou for doing this video!! Your awesome!!

@WarpedPerception

2 жыл бұрын

Thank you, and the next video we're going to be able to see what's going on.

superbe création belle vidéo merci

Awesome video. You are an amazing fabricator 👏

I love the videos just wish you upload more😁

@WarpedPerception

2 жыл бұрын

I'm working on it. Which is exactly why when I had the failure I still uploaded it anyway because that's what everybody's been asking me to do for over a year and a half on this channel. Normally if I have a failure like this or things don't go as planned I'll scrap the whole video or come back to it a week or two later, but I'm going to try it this way for now and the heck with it just do more videos

That camera angle while driving, WOW!!! Amazing shots man 😎

You've gotten very skilled working with acrylic. This looks super clean.

Bro your fabrication work is top notch, you did an amazing job😊👍👍👍

@WarpedPerception

2 жыл бұрын

Thank you

Love your videos! Thank you for your hard work and inspiration brother!

@WarpedPerception

2 жыл бұрын

Thanks !

Now this is pretty dope

@WarpedPerception

2 жыл бұрын

Thank you

Wow bro this is awesome ❤️

See through coolant systems are really cool to see as well

Great vid!! Subscribed 🤟

Dude your content is awesome, keep doing what u do best.

@WarpedPerception

2 жыл бұрын

Thanks!!!

wonderfull art!

Very interesting and fascinating video!

Your a brilliant engineer

@WarpedPerception

2 жыл бұрын

Thank you, it's bittersweet, on one hand I can build anything on the other no one respects my time or what I need to get done, everyone is like " can you please do this for me real quick" .. yup..no perfect world

Yow Yow yoow is that a supraaa i love your projects man .

Who would have known air is clear........amazing.

Nice man cool idea can’t wait to see the Dino run

Can't stop thinkin he sounded almost like Vin Diesel Brian, I gotchu!!

Im a little late, but im impressed!🔥🔥🔥

No words for this. Claps!

@WarpedPerception

2 жыл бұрын

Thank you

Racing the kids was my favorite part! 😂👌🏾

Very cool................ 👍👍👍👍

"I thought corn came from Indiana" you sir are awesome!

A video I finally see!

Really neat that you are able to bulid all kinds of cool items like this. Now yes broken parts and testing is always a good idea before a big run. Congratulations on the bulid. Can't wait to see the results. Be safe team.

@WarpedPerception

2 жыл бұрын

Thank you and yes exactly, the way I used to do it before this year is if I had a failure like this I would just scrap the entire episode or fix it and come back to it in a week or two, but this would always put me behind schedule and what everybody would tell me is just post the failures if it fails and do a part two. That being said I listened to everybody and that's what I did this time.

Hermano excelente video 🆗 ese carro es una hermosura 😸

My boy @ Vinetii!!!!! hell ya cool apperance by a hommie caught me off guard!