I never used it because the battery 🔋 drained much faster..thanks for sharing..😎👍
@manuelgarcia3184 ай бұрын
Question, I recently had all three batteries replaced and now can’t get the hourly beep enabled. The watch repair guy didn’t know how to get the beeping back. Thanks
@plasticindices3385
4 ай бұрын
Hi Friend. That is strange I really dont know. Try pressing all 4 buttons together and rebooting.
@gggboy776 ай бұрын
Thank you I have one aqualand doing that
@plasticindices3385
6 ай бұрын
thanks for watching friend
@alexb867011 ай бұрын
How are bezels attached to the case on these 1st generation aqualands? Is it with metal spring or rubber gasket? Thanks
@plasticindices3385
11 ай бұрын
Hi friend, unlike seiko divers, these aqua gen 1 models do not carry any rubber seals along the inner edge of the bezel. Thanks for watching
@josephstuart444011 ай бұрын
Hi mate. I have just acquired a beautiful c022 and I love it. However the setting button does not work properly. It’s pushes and decompresses ok, but the funtion does not. Any idea why?
@plasticindices3385
11 ай бұрын
Hi. This problem happens when the copper layer on the electronic plate either wears out or is dirty. If it is the former, then you must apply a little solder in that area. Hope this helps
@josephstuart4440
11 ай бұрын
@@plasticindices3385 are you able to do a video explaining this? Thanks mate
@plasticindices3385
11 ай бұрын
@@josephstuart4440 good idea let me try 👋🏻🙏🏻
@josephstuart4440
11 ай бұрын
@@plasticindices3385 that would be so helpful!!! Thanks from Australia. I also own the JP2000.
@plasticindices3385
11 ай бұрын
@@josephstuart4440 Please check out the last video i put out. I show a circuit plate which was worn out around that area. Thanks for watching! 👋🏻
Пікірлер: 15
I never used it because the battery 🔋 drained much faster..thanks for sharing..😎👍
Question, I recently had all three batteries replaced and now can’t get the hourly beep enabled. The watch repair guy didn’t know how to get the beeping back. Thanks
@plasticindices3385
4 ай бұрын
Hi Friend. That is strange I really dont know. Try pressing all 4 buttons together and rebooting.
Thank you I have one aqualand doing that
@plasticindices3385
6 ай бұрын
thanks for watching friend
How are bezels attached to the case on these 1st generation aqualands? Is it with metal spring or rubber gasket? Thanks
@plasticindices3385
11 ай бұрын
Hi friend, unlike seiko divers, these aqua gen 1 models do not carry any rubber seals along the inner edge of the bezel. Thanks for watching
Hi mate. I have just acquired a beautiful c022 and I love it. However the setting button does not work properly. It’s pushes and decompresses ok, but the funtion does not. Any idea why?
@plasticindices3385
11 ай бұрын
Hi. This problem happens when the copper layer on the electronic plate either wears out or is dirty. If it is the former, then you must apply a little solder in that area. Hope this helps
@josephstuart4440
11 ай бұрын
@@plasticindices3385 are you able to do a video explaining this? Thanks mate
@plasticindices3385
11 ай бұрын
@@josephstuart4440 good idea let me try 👋🏻🙏🏻
@josephstuart4440
11 ай бұрын
@@plasticindices3385 that would be so helpful!!! Thanks from Australia. I also own the JP2000.
@plasticindices3385
11 ай бұрын
@@josephstuart4440 Please check out the last video i put out. I show a circuit plate which was worn out around that area. Thanks for watching! 👋🏻
It’s not hidden nor secret
@plasticindices3385
Жыл бұрын
A lil suspense 😃... thanks for watching