Thank you for showing this, i have an unrustered one but i dare say, might be same problem, heres to me drilling out riberts

@tick_go5989

3 ай бұрын

Yes, you can do it. Easy does it! 👍 Best to you 🤞👍🤗

Been searching this morning to see how to make better use of the cargo box I have and how to fix that stuck LOCK - Can't even get my cylinder to turn! Thanks for the help on removing and maybe saving the lock.

@tick_go5989

3 жыл бұрын

Yes, at first my cylinder can't even so lots of WD-40 and lightly working it back and forth and eventually it turns. But still have to drill the rivets then clean out the inside rust. Thanks for the comment and good luck with yours.

Thank you-had to make repairs to mine today.

@tick_go5989

3 жыл бұрын

Glad I could help!

Just got one of those today. I'll drill my lock too. Mine didn't come with any keys. So I'll probably put a new lock on it. Thanks for the info. Good luck with yours!

@tick_go5989

10 ай бұрын

Thanks for the comment and have a wonderful rest of the Labor Day holiday! 🇺🇸

I lost my key and I’m trying to figure out my options lol think I’m going to drill it open and then put a bracket on the outside with a master lock

Thanks!!!!!

Thanks for the video. Gave me the idea to check for cracks before i take it a locksmith and have a key made as that is my issue --- a missing key. I did subscribe to your channel. and i also shared and like... nice video.

@tick_go5989

11 ай бұрын

Thank you so much and good luck with yours!

Nice. Where can I get a replacement lock and key from. Thank you.

Can you replace cylinder on this lock? I have the same cargobox with lock broken. Trying to figure out if I can extract cylinder and replace it. Do you remove it with lock open or closed?

@tick_go5989

9 ай бұрын

The answer is yes but you got to get the cylinder in the unlock position (which means you got to have the key in the cylinder), remove the C clip on the back side of the lock then the whole cylinder will come out. Thanks for the comment and good luck! 👍

@Sidorvm

9 ай бұрын

Thanks for prompt response! For some reason it won't come out in unlock position with C clip removed. but lock is damaged from the inside. Do you have a picture of the core when you took it out? @@tick_go5989

Ya know what sucks, I think my lock broke, when I put the key in and twist it back and forth there is no resistance. It's locked and FULL to the bring with my stuff. I can't drill cuz I will damage things inside, I have no idea how to get this damn thing open! :(

@tick_go5989

3 жыл бұрын

Hi, mine had no resistance either so I don’t think your is broke. You just have to carefully drill it out and see. As you have stuffs in there I would just carefully drill and not to let it go in deep. The main thing is to popped the head off the rivet or maybe a small Dremel cutoff wheel might do the trick. Good luck!

@cruisey9857

3 жыл бұрын

@@tick_go5989 Thanks! I gave it another try and I gave it a good wack on the top and it popped open LOL, I think I put so much stuff in it that the plastic was bowing outward making it hard to open and align the lock. I was moving and running out of cargo space! Thanks!

LMFAO, the reason you can’t drill through it is because your drill is on reverse 😂

@tick_go5989

2 жыл бұрын

Thanks for the feedback. Another member left the comment about a year ago and my replied: “It is just the fast speed of the bit that look as reversed. Focus on the chuck and do see it goes forward.”

Bro why is your drill on reverse?

@tick_go5989

3 жыл бұрын

Thank you for the comment. It is just the fast speed of the bit that look as reversed. Focus on the chuck and do see it goes forward.

only thing I heard was the drill.

would be real nice if we could hear you....how not to make a video