Any questions? Leave them in a separate comment below. ⬇️

@zacheryzimpelman4676

4 ай бұрын

How thick is the typical layer of sealant

@semondemon3787

3 ай бұрын

That house is beautiful

@SEALCOATINGISLIFE

3 ай бұрын

Very thin

Just love watching true professionals do thier jobs. You make it look easy and it's not.

@SEALCOATINGISLIFE

11 ай бұрын

This one was brutal. Last job of the day. I almost didn't make it.

@cotter3390

10 ай бұрын

Where do you get those brooms

EXCELLENT work as always. every detail PERFECTION. thanks for the post…. ✌🏼✌🏼

@SEALCOATINGISLIFE

Жыл бұрын

Thanks for watching!!!

Original audio is a nice change up 👌

@SEALCOATINGISLIFE

Жыл бұрын

I think so too!

Hello guys , wow a big driveway this time, i enjoyed to see how you get it Sealcoating, you did a great job , thanks for showing guys, see you next time 😀👍💪👌

@SEALCOATINGISLIFE

11 ай бұрын

Glad you enjoyed it. Thanks for the visit.

From here in Scotland, well done again, always love the longer videos, from start to the end results,well done,

@SEALCOATINGISLIFE

11 ай бұрын

Glad you like them!

I love the close-up shots at 13:05.

Impecable tu trabajo te felicito.

@SEALCOATINGISLIFE

Жыл бұрын

Thanks, Eric.

thanks for posting fellas..

@SEALCOATINGISLIFE

Жыл бұрын

No worries! Thanks, Jule.

Beautiful job as always! When doing the fine cut-in along sidewalks, cobblestone or pavers, which direction do you prefer working from, left to right, right to left, or doesn’t it matter?✌🏻

@SEALCOATINGISLIFE

Жыл бұрын

I would say that I prefer the edge to be on the left side. But it sometimes depends on the slope of the asphalt.

you should consider mounting your brush stick the other possible way to the brush head.

Head camera... Whoa!

@SEALCOATINGISLIFE

11 ай бұрын

I wanted to head-cam the whole thing, but of course it overheated 10 minutes in.

Wow that guy did the whole community $$$$

@SEALCOATINGISLIFE

11 ай бұрын

💯

Out of curiosity how mwny clients do u usually have i really love these videos there relaxing

@SEALCOATINGISLIFE

10 ай бұрын

There’s a lot. Thanks for watching.

I've watched your videos off and on for the last few years. Great content! Its been neat seeing how you've grown! I'm located in IN and just started my sealcoating business. I like to do quality work and would like to know where you buy your supplies...Wire brushes? If you have a video that references this, would you please link it for me under this comment. What is your sand/sealer ratio? What are your thoughts about additives? I use the pave gel from sealmaster. I love the idea of additives in my sealer for a nice quality look and wear! Interested in what additives you might use if any. Looking forward to your reply.🎉

@SEALCOATINGISLIFE

11 ай бұрын

send me an email and I can better answer your questions there: sealcoatingislife@gmail.com

How much would this job typically run for? Love your vids, great work too !

@SEALCOATINGISLIFE

9 ай бұрын

Thanks. It’s around $0.25/square foot.

Great job, as always, Gregory. I have two questions: 1) What do you guys do when you have to use the bathroom, and you're on a big job; and 2) How do you come up with some of these funny video names? Oops - one more. Is it possible for the clips you use as Stories on Instagram be saved as shorts here on KZread? I'd love to be able to watch them again after they've left Stories. Thanks for another awesome video.

@SEALCOATINGISLIFE

11 ай бұрын

I use solo cups for the bathroom. Ive gotten pretty good at being inconspicuous during the process. For the pother one I will only do at home, (either before of after work). Frying Dragon is from the movie "Sidekicks" that I was watching while I was editing this. I have all this clips saved on my phone. I'll try and do something with them over the winter. I just had to transfer 4,000 sealing clips to a separate external hard drive. I have so many. 😂

@kimberlyhansen6378

11 ай бұрын

​@@SEALCOATINGISLIFEI hear you on that!

@kimberlyhansen6378

11 ай бұрын

By the way - you're pretty darn good at edging yourself.

nice work. wondering what brand do you use ?sealmaster?

@SEALCOATINGISLIFE

11 ай бұрын

We are not using Sealmaster. We’re using a different company’s AE.

God bless you guys that have to work out in this heat! If the heat up there is anything close to what it’s like here in Texas, I don’t know how you survive. Which brings me to my question, is it ever too hot to use the product? Can you put seal on really hot asphalt? Can the heat actually cause it to dry too quickly?

@SEALCOATINGISLIFE

Жыл бұрын

Great question. Yes, for me it gets too hot after 1pm. We will never work past 1pm. And on extremely hot days, we’re not working past 12pm. In extreme heat, the sealer dries before it can be properly worked into the asphalt and before we can remove the footprint and lines. That’s how it goes for me, anyway. ☀️

@VeiledDraconis

Жыл бұрын

If you hand seal hot asphalt it will streak and look terrible. If it's hot I seal commercial work like parking lots and spray it.

Hy guy. Very good job , is really clean . What is the liquid ? Peint or bitum (goudron) . Sorry for my english , i’am french

@SEALCOATINGISLIFE

11 ай бұрын

Hey thanks for watching. All the info is in the video description. 🇫🇷

Where did you purchase those LARGE push brooms?

@SEALCOATINGISLIFE

Жыл бұрын

Email me

You guys ever do 2 coats?

@SEALCOATINGISLIFE

10 ай бұрын

Residential is 1 coat

Hi Greg. I am curious how often you replace your brushes with a new one? I know you keep them in a water tank but how long does one last on average? Also, have you used a squeegee before and what have you found the advantage of the brushes are over a squeegee? Thanks.

@SEALCOATINGISLIFE

11 ай бұрын

3 weeks is the max life of a brush. You can flip them to get a few extra days, sometimes. I have NEVER used a squeegee so wouldn’t know.

@jakegefroh4660

11 ай бұрын

I guys I’m just toning to get started in this type of work and glad that you asked that question. So the brush box is just a box with water in it correct?

@SEALCOATINGISLIFE

11 ай бұрын

Yes, with bout 6-8 inches of water in it.

Do you add water to your sealer or additives and or agitate it a lot ? Your sealer consistency look way easier to work with vs how mines comes out the end. Yours flows right out no problem.

@SEALCOATINGISLIFE

11 ай бұрын

We add water and sand to our material at the full station.

Do you have to heat the product before applying it to the surface?

@SEALCOATINGISLIFE

2 ай бұрын

Nope

I notice you post equipment you use, but where do you get your brushes and what kind are they?

@SEALCOATINGISLIFE

11 ай бұрын

amzn.to/3Siyvk9

How come you prefer the synthetic brush over the tampico brushes?

@SEALCOATINGISLIFE

11 ай бұрын

I think they last longer on the asphalt

What should i do if my town doesn’t have a bulk fill supplier for my sealer?

@SEALCOATINGISLIFE

10 ай бұрын

1. Buy buckets at a big box hardware store. 2. Order 55 gallon drums. 3. Make the drive to the next place that seeks it in bulk. 4. Buy a BIG tank and have the sealer delivered to you.

How much of the seal coating liquid do you use in a week? Is it expensive? Do you mix it yourself? How much can your container on your truck hold? How long does a filled container on the truck last? 2 days? 3? Thanks 👍🏾❤💯

@SEALCOATINGISLIFE

11 ай бұрын

In 5 days well go through about 1,000 gallons. Expensive is a relative term. We do mix it ourselves by adding sand and water. The truck holds 550 gallons. But we never fill to the brim. We can get 2 days of work out of a full truck.

@l.c.9596

15 күн бұрын

How much sand and water do you use per gallon of sealer and what kind of sand is it

so what happens to all the grass at the edges that got covered in the sealcoating?

@SEALCOATINGISLIFE

Жыл бұрын

It’s grows out.

What do you have in the box where you store the brushes to keep them from sticking together?

@SEALCOATINGISLIFE

Жыл бұрын

It’s just water.

@brantz648

Жыл бұрын

@@SEALCOATINGISLIFE You have a pretty nice setup. Do you go over the cost to get started in your videos? I'd like to learn more.

When is it to hot to seal coat?

@SEALCOATINGISLIFE

10 ай бұрын

After 1pm here

How much did you make on this job and how long did it take? 😊

@SEALCOATINGISLIFE

11 ай бұрын

This was a little over an hour

how long is the curing time after sealcoating that whole driveway?

@SEALCOATINGISLIFE

11 ай бұрын

48 hours

@Sir.SouthSider

11 ай бұрын

@@SEALCOATINGISLIFE got it thanks 🙏🏼

how much does it cost to put that...lets say i got some 12 ft width by 45 ft long...can you give me an estimate

@SEALCOATINGISLIFE

9 ай бұрын

$250 is the minimum

Why do you brush instead of spray ?

@SEALCOATINGISLIFE

5 ай бұрын

I have a video on that

How do I clean my brush after im done doing my driveway?

@SEALCOATINGISLIFE

10 ай бұрын

if its water based, use water

@executiveinvestments

10 ай бұрын

@@SEALCOATINGISLIFE ok thanks.

@SEALCOATINGISLIFE

10 ай бұрын

We keep our in a brush box that’s filled with water

Question for you guys...Do u know how to store a seal brush without a brush box aka (trough)?

@SEALCOATINGISLIFE

11 ай бұрын

You would have to clean it completely before storing it. It wouldn’t be worth it. If any sealer dries it the brush, you wouldn’t be able to use it.

Can you apply this stuff to concrete driveways? Just curious...

@SEALCOATINGISLIFE

11 ай бұрын

This product is for asphalt only.

Where are you guys located? I live in New Jersey. I need your help badly!!!

@SEALCOATINGISLIFE

11 ай бұрын

Western Philly suburbs

Are you in the Harrisburg area like around there.

@SEALCOATINGISLIFE

11 ай бұрын

Were in southeastern PA

How much does it cost per square foot

@SEALCOATINGISLIFE

10 ай бұрын

Around .25

Do you provide any warranty? What company do you purchase your sealer from?

@jvzzyj5926

11 ай бұрын

Also, what was the square footage on this driveway and what did you charge the customer? Or…how would you price a 2,500 sqft driveway, no cracks, sealed 3 years ago, can you give a price range per sqft depending on how porous?

@SEALCOATINGISLIFE

11 ай бұрын

We’re around $0.25/square foot. You’re prices have to be competitive and still turn a profit.

Tidy work - green lawns

@SEALCOATINGISLIFE

Жыл бұрын

Thanks

@logcoatingservices

Жыл бұрын

@@SEALCOATINGISLIFE Are you guys any were near that flooding

Excellent job! One stupid question: for what purpose is this seal coating? Does it solve any practical problems or is it just for looking good? I mean it looks amazing!!

@SEALCOATINGISLIFE

11 ай бұрын

Check the video description for more information.

how hot was it?

@SEALCOATINGISLIFE

3 ай бұрын

Around 120F on the asphalt

@jamiemorales2022

3 ай бұрын

@SEALCOATINGISLIFE do you charge more considering the added heat from the asphalt because in west Texas it is Hell. Probably why I don't see Anyone doing this.

@SEALCOATINGISLIFE

3 ай бұрын

@@jamiemorales2022 the price is the same all year round.

Why brushes over squeegee and and spray bar?

@SEALCOATINGISLIFE

11 ай бұрын

It’s cleaner this way. Also, you can’t work on windy days if you’re spraying residential.

刷这个的作用是什么？

@SEALCOATINGISLIFE

Жыл бұрын

Check the video description

No sir....Go get a 55 gallon contractors garbage bags and wrap your brushes with it. Of course it's easier to wrap a 3' brush but the bag is big enough to fit the 4'.

@SEALCOATINGISLIFE

11 ай бұрын

I would imagine that makes quite a mess. The sealer has legs 🦵

@user-xs6lq2cw6d

11 ай бұрын

Not at all give it a try...

@daveklein2826

11 ай бұрын

Why would they do that when they have a brush box

@user-xs6lq2cw6d

11 ай бұрын

Brush boxes are messy...U fill them with water.. u tap brush on what bottom of flat bed...side of tank.. U get build up...they take up room... your sticks are straight up in the air... A wrapped is easily stored and will stay totally soft... I've been doing this since 1987